Here are some possible leads for the use of the Asus OC panel 2 hotwire function for the GTX 1060 Strix OC gaming 6GB.
I have done some extensive searching but there isn't much info to be found on the subject.
Apart from Shamino R4E guide. Which can be found here:
With this knowledge and looking at some other cards I "ASSUME" this would be the way to hook up the panel.
I am trying to get some of this info confirmed but not sure when that will be.
See the picture for info.
In order to overcome the power limit you could solder the shunt resistor.
Also this mod isn't tested yet. And I am not sure if it is needed or would give any benefit.
The voltage controller is the uP 9511p. In which case you would need the FB pin, which is number 31.
See attached picture. The datasheet is pretty easy to find if you search for uP 9511s.
The rambling Wig from the UK - AHOC, made a video about the controller.
There is always something to learn from it.
So this is what I was able to get up with. Use it in your advantage but not any garantee is giving that these mods actually work. I haven't done them myself yet as I am waiting for some conformation which could take a few weeks. But I wanted to share what I was able to find.
If you have any more questions just ask! I might be able to help out or not ;-)
Please, keep us informed if you find anything that works or some other things to modify the card.
It never hurts to help!
Now, have fun and go murder some cards!