[Official] The Ivy Bridge Stable / Suicide Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET - Overclock.net - An Overclocking Community

Forum Jump: 

[Official] The Ivy Bridge Stable / Suicide Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET

Reply
 
Thread Tools
post #1 of 3827 (permalink) Old 04-24-2012, 11:21 AM - Thread Starter
Retired Staff
 
munaim1's Avatar
 
Join Date: Dec 2007
Location: .:.
Posts: 10,812
Rep: 921 (Unique: 603)

<Banner>

 
**Post Your 24/7 Prime Blend Stable Ivy Bridge Chip**
 
 

|*Please make sure you read the RULES BEFORE submitting*|


**This thread is not for discussing safe Temps / Voltages for Ivy Bridge**

 

 

*~*~*~*~*~*~*~*~*~*~*~ D I S C L A I M E R *~*~*~*~*~*~*~*~*~*~*~ (Click to show)

 

 
PLEASE READ

I take NO responsiblity for the headache / stress / anxiety / emotional discomfort etc lol that this may cause when trying to overclock and stabalize your cpu, this is a lenthy process which requires a lot of patience. If your not upto the task, then this thread may not be for you.

This is not an EASY club to join!!!

On that note, any damage, degradetion that you may encounter through stress testing or SUICIDE RUNS is your responsiblity and your responsiblity alone.

So you have been WARNED, other than that enjoy your 100% stable system and also have fun getting it there!!!
 

 

 

 

 

 

(to the nearest hour)

 

 

Quote:
Those having issue's viewing the spreadsheet, HERE is the direct link to the spreadsheet. Also changing the Forum preference like so will enable you to view threads in widescreen without the pesky sidebar which as you know takes up a lot of space.  Give it a go and see how it works for you.

 

 

400 700

 

 

 

 

 

If you find there is a mistake or anthing that needs to be changed then either PM me / mrtoyotaco or PCWargamer. Also suggestions on how to make this thread better will be greatly appreciated. Big thank you to mrtoyotaco and PCWargamer for helping out and keeping this thread going, They too will be helping to make sure the both tables are updated accordingly.
 

 
Rules

One last thing, PLEASE read the small print between each RULE



1. 12 HOURS+* STANDARD BLEND or CUSTOM BLEND with UPTO 80/90% of YOUR AVAILABLE RAM* used with Prime95 v27.7

***Check with task manager/performance tab/physical memory for how much AVAILABLE RAM you have, to do Custom BLEND, JUST change the amount of RAM from 1600 to 90% of your available***

***Prime FFT Length Info: Shad0wfax kindly pointed out the importance of running longer than 12hours HERE***

***All workers must be visible (hit the windows tab between options and help in prime and select tile)***


2. MUST have a screenie WHILE UNDER LOAD with your OCN name (notepad etc), Batch Number of your CPU, CPU-Z 1.60.1+ and REALTEMP 3.70+*!!

***REALTEMP must show the duration of how long it's running, minimum of 12hours same as Prime95 like THIS!!!***


3. LIST YOUR COOLING (notepad etc) and provide screenie of RAM, VOLTAGE, MOBO INFO via cpu-z and TASK MANAGER*

***TASK MANAGER only if your running custom blend, make sure you show Prime95 process.***


4. Must have a mild overclock 4ghz+
 

All submissions must follow a similar template like this!!!!
(This is mine before a few rules got amended)

CLICK HERE


IF YOU ANY PROBLEMS WITH THESE RULES PM ME OR POST IT HERE
 
*****************Standard Blend VS Custom Blend Stability***************** (Click to show)
 

Stability is hugely subjective, for example leaving a 20/30 tabs open and playing bfbc2 with fraps will surely drain the available RAM, that for someone could be everday usage.

Taking that into account I find that being able to stay stable for scenerio's like that, decreases your chances of getting any kind of bsod, therefore 'MORE' stability, which might be overkill to some but desirable for plenty of people.

On that note, those that have passed the blend run at 1600mb are stable for how they run their rig, for example, gaming 24/7 bfbc2 with no problems, however, it 'may' not be stable for high ram usage scenerio's which could be unlikely for some as they won't be running fraps and have 20/30 tabs open in the background because that's not how they run their rig.

Once you have done a 12hour+ blend whether it be custom or standard blend, I'm pretty sure there won't be a need to run it again and you [B]might [/B]not get a bsod that relates to unstability of your overclock but then again you [B]might[/B] because as you know overclocking and stress testing is not a guarantee.

There will ALWAYS be different opinons about this whole stability issue.

This is JUST the stable club, whether you go for, a standard blend or a custom blend you should be stable for what you use it for, stability is stability for your own use. If standard doesn't work for you, then go ahead and do a custom blend, that's the way I see it.

This is the stable thread, that's means general stability and extreme stability, both are included, however those with 8gb+ should really want to be using custom blend rather than normal blend (1600mb) which not only stresses the RAM and CPU but also the IMC of the chip which is important for stability.


BUT ITS TOTALLY UPTO YOU!!!  - I personally recommend custom blend with upto 90% of your available RAM!!! biggrin.gif

 

Info regarding Prime FFT's and the total time it takes to complete, (credit Shad0wfax) HERE

 

 
 
Finally PLEASE provide a screenshot that we can actually see!!!
*USE OCN'S IMAGE ATTACHMENT TOOL (located to the left of the paperclip icon)*

 

Quote:

Downloads:

 


 

Choose your sig HERE and wear it proudly
 
 
 
 
 

Work in progress, will be revised accordingly :)

munaim1 is offline  
Sponsored Links
Advertisement
 
post #2 of 3827 (permalink) Old 04-24-2012, 11:21 AM - Thread Starter
Retired Staff
 
munaim1's Avatar
 
Join Date: Dec 2007
Location: .:.
Posts: 10,812
Rep: 921 (Unique: 603)

<Banner>

 

**Post Your Ivy Bridge Suicide / Benchmark run**

 

 

 

 

Rules
 



1. CPU-Z Frequency (maximum overclock) will only be accepted with cpu-z validation link.
 

 

2. Superpi / wPrime runs will be accepted via HWbot validation or if OCN name is present in the screenshot (watermark your screenshots!!).


3. Memory Frequency (max Dram overclock) will only be accepted with cpu-z validation link.


4. PLEASE provide as much info as possible!!! Amount of RAM, what cooling (LN2 or water etc), CPU Batch Number, Motherboard used, and voltage for both CPU and RAM. ALL CPU-Z Validations must be made with OCN username!!!!!!
 



IF YOU ANY PROBLEMS WITH THESE RULES PM ME OR POST IT HERE
 
 
 
Finally PLEASE provide a screenshot that we can actually see!!!
*USE OCN'S IMAGE ATTACHMENT TOOL (located to the left of the paperclip icon)*

 

 

 

 

 

 

 

 

Quote:

Those having issue's viewing the spreadsheet, HERE is the direct link.

 

munaim1 is offline  
post #3 of 3827 (permalink) Old 04-24-2012, 11:21 AM - Thread Starter
munaim1 is offline  
Sponsored Links
Advertisement
 
post #6 of 3827 (permalink) Old 04-26-2012, 02:56 PM
New to Overclock.net
 
Join Date: Feb 2012
Posts: 1,178
Rep: 43 (Unique: 39)
LET'S GOOOOOOO

(ON SUNDAYYYYYY...)
samwiches is offline  
post #7 of 3827 (permalink) Old 04-26-2012, 02:58 PM
Linux Lobbyist
 
KuuFA's Avatar
 
Join Date: Oct 2011
Location: Houston, Texas
Posts: 2,450
Rep: 197 (Unique: 177)
My Wallet is ready!
So are my boards!

Gene V : 3770k

Gene IV: 3570k
KuuFA is offline  
post #8 of 3827 (permalink) Old 04-29-2012, 11:51 PM
New to Overclock.net
 
Join Date: Feb 2012
Posts: 1,178
Rep: 43 (Unique: 39)
MicroCenter didn't do the combo deal for a Z77 mobo. I got a 3770K for my Z68.. maybe not a good idea?

LLC: disabled
Offset: +0.005v

I thought that would give me something near default vcore.

But it's like this:
VID: 1.25v
Idle: 1.16v
Load: 1.20v

VID does not change with multi unless LLC is enabled.

update:
I've gotten three dawwgged IB's, that's all. The last one isn't anything much either (4550MHz, 1.27v). I'll just keep buying the OC plan at the store, I guess.
samwiches is offline  
post #9 of 3827 (permalink) Old 04-29-2012, 11:56 PM
New to Overclock.net
 
stren's Avatar
 
Join Date: Nov 2010
Location: San Diego
Posts: 5,576
Rep: 258 (Unique: 208)
3770K + Gene should be here tuesday!

Trouble-Maker

I write water cooling and case reviews but you'll have to use google because I can't link them here thumb.gif


stren is offline  
post #10 of 3827 (permalink) Old 04-29-2012, 11:58 PM
New to Overclock.net
 
Sk1nNy's Avatar
 
Join Date: Sep 2011
Posts: 79
Rep: 2 (Unique: 2)
Niceeee thumb.gif Will post my result soon since I'm giving it some times to get familiar with the system before pushing it further biggrin.gif
Sk1nNy is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off