Haswell Overclocking Guide [With Statistics] - Page 1969 - Overclock.net - An Overclocking Community

Forum Jump: 

Haswell Overclocking Guide [With Statistics]

Reply
 
Thread Tools
post #19681 of 19696 (permalink) Old 09-01-2018, 06:13 AM
Overclocker
 
JackCY's Avatar
 
Join Date: Jun 2014
Posts: 10,058
Rep: 340 (Unique: 241)
Quote: Originally Posted by white owl View Post
You can make a custom .iso of 10 using MSMG. You can cut out all the metro stuff in one swoop and never worry about it again. Anyone using this thread could probably figure it out if you have the time. I did but it took a while.
Depends what you do, I've used slimmed down variants before Win8.1 and while they may work 99% of the time there is always a case later on when oh no I need some feature I cut out for some oddball program to function etc. down the road.

Plus if one cuts out metro configuration if even possible they've removed the standard menus now, so one is left with registry only... eh.
JackCY is offline  
Sponsored Links
Advertisement
 
post #19682 of 19696 (permalink) Old 09-09-2018, 08:36 AM
Linux Lobbyist
 
Join Date: Sep 2018
Posts: 20
Rep: 0
hi before one year i did overlock my 4770k from the program asus suit 3 but i had some problems


can you help me to overclock my 4770k from the bios of asus z87 deluxe?


i have take fotos the pictures from my asus z87 deluxe for to help me to overclock my 4770k.


[​IMG]





can you help me which values to put in every field from these 2 fotos i have taken from asus z87 deluxe?

can you help me please in these 2 fotos>??> to put the values??

i have take fotos the pictures from my asus z87 deluxe for to help me to overclock my 4770k.
did you see the the 2 fotos please??

I HAVE http://www.coolermaster.com/cooling/...r/nepton-240m/



AND PSU http://www.coolermaster.com/powersup...tt-maker-1500/

Last edited by dimitrios2030; 09-09-2018 at 08:53 AM.
dimitrios2030 is offline  
post #19683 of 19696 (permalink) Old 09-09-2018, 09:01 AM
Linux Lobbyist
 
Join Date: Sep 2018
Posts: 20
Rep: 0
hi before one year i did overlock my 4770k from the program asus suit 3 but i had some problems


can you help me to overclock my 4770k from the bios of asus z87 deluxe?


i have take fotos the pictures from my asus z87 deluxe for to help me to overclock my 4770k.

can you help me please in these 2 fotos>??> to put the values??

i have take fotos the pictures from my asus z87 deluxe for to help me to overclock my 4770k.
did you see the the 2 fotos please??

I HAVE http://www.coolermaster.com/cooling/...r/nepton-240m/



AND PSU http://www.coolermaster.com/powersup...tt-maker-1500/


i want to to overclock my 4770k to 4,,4 or 4,5
what values i will put for core ratio limit and min cpu cash ratio and max cpu cash ratio?/ ??

also
in cpu core voltaGE WHAT I WILL PUT?

AND ALSO IN CPU CPU CORE VOLTAGE OVERIDE WHAT I WILL PUT?>?

ALSO DO I NEED ANOTHER THINGS TO PLAY WITH IN ASUS Z87 DELUXE??
I MEAN FOR THE OVERCLOCKING I NEED ONLY
core ratio limit
min cpu cash ratio
max cpu cash ratio
cpu core voltaGE
CORE VOLTAGE OVERIDE ??
Attached Images
 
dimitrios2030 is offline  
Sponsored Links
Advertisement
 
post #19684 of 19696 (permalink) Old 09-12-2018, 07:51 AM
El Rotten
 
SgtRotty's Avatar
 
Join Date: May 2012
Posts: 211
Rep: 3 (Unique: 3)
Refer to page 1. There is a complete guide on what to do. Expect to do some testing back and forth with your settings. To make things easier, leave cache at auto multiplier and auto volts. Bump core multiplier and volts and test after each bump. Watch your temps, keep it within your safe limits! Takes alot of time

i7 [email protected]/4.8 - 1.385v
asus prime-a z370
3200c14 gskill ripjawsV @ 4000 16-16-16-41 1.45v
1x MSI 980ti
850w evga super nova G2
SgtRotty is offline  
post #19685 of 19696 (permalink) Old 09-25-2018, 12:30 PM
Linux Lobbyist
 
Join Date: Jul 2018
Posts: 3
Rep: 0
My 4790k overclocks but can't decide which overclock to go with.



5ghz 1.373 vid=1.403-vcore 2.05 Input voltage Temp 73c
4.9 1.325 vid=1.355-vcore 1.95 Input voltage Temp 70c
4.8 1.27 vid=1.3-vcore 1.85 Input voltage Temp 67c

Temperatures OCCT Linpack no avx

What clocks would ya use if it were your cpu?
Giggla_707 is offline  
post #19686 of 19696 (permalink) Old 09-25-2018, 01:49 PM
1689 Federalist
 
lightsout's Avatar
 
Join Date: May 2010
Location: Southern Oregon
Posts: 11,359
Rep: 241 (Unique: 208)
Quote: Originally Posted by Giggla_707 View Post
My 4790k overclocks but can't decide which overclock to go with.



5ghz 1.373 vid=1.403-vcore 2.05 Input voltage Temp 73c
4.9 1.325 vid=1.355-vcore 1.95 Input voltage Temp 70c
4.8 1.27 vid=1.3-vcore 1.85 Input voltage Temp 67c

Temperatures OCCT Linpack no avx

What clocks would ya use if it were your cpu?
5ghz if you want bragging rights.

I'd go with 4.8, much lower vcore, better temps, you'll never notice the difference in real usage anyways.

Black Box
(11 items)
CPU
R5 2600X
Motherboard
Asus Strix B450-I
GPU
EVGA GTX 1060 6GB
RAM
GSkill 16gb 3200c14 Flare
Hard Drive
500gb SSD
Power Supply
EVGA G1+ 850
Cooling
Macho Rev B
Case
NZXT H200 Black
Monitor
LG 32GK650F-B 1440p 144hz
Mouse
Sensei Raw
Audio
Sony Core Bookshelves
▲ hide details ▲


lightsout is offline  
post #19687 of 19696 (permalink) Old 09-25-2018, 02:59 PM
New to Overclock.net
 
bond32's Avatar
 
Join Date: Mar 2013
Posts: 2,899
Rep: 91 (Unique: 70)
Quote: Originally Posted by Giggla_707 View Post
My 4790k overclocks but can't decide which overclock to go with.



5ghz 1.373 vid=1.403-vcore 2.05 Input voltage Temp 73c
4.9 1.325 vid=1.355-vcore 1.95 Input voltage Temp 70c
4.8 1.27 vid=1.3-vcore 1.85 Input voltage Temp 67c

Temperatures OCCT Linpack no avx

What clocks would ya use if it were your cpu?
That's almost identical to my 4790k... Been running at 4.8 1.3V for close to the time I took it out of the box at it's release. Mine will also bench at 5.0, but it's not stable.

If I remember, mine will also run at 4.6 at 1.2V, which is probably what I should have been doing...
bond32 is offline  
post #19688 of 19696 (permalink) Old 12-06-2018, 12:00 PM
New to Overclock.net
 
pininfarina575's Avatar
 
Join Date: May 2014
Posts: 9
Rep: 0
Hi yall..

now that my 4770k is not in my main PC anymore, I felt comfortable trying to push it a bit more... and I'm cooling it with a spare H80i I had around....

But oh my mine seems to be total dud... I've read maybe the first 20 pages of this thread (not goona read through 1900+ pages haha) and my 4770k must be the worst one by far... here's how bad it is..

I just put multiplier to 4.1 to start. Ran IBT standard 10 and the moment IBT starts going, the package temps hit 100 celcius and starts thermal throttling. the cooler doesn't even have time to pick up any heat... CPU package temp just jumps from ~34 idle to 100 within a second or two... The vcore voltage was set to 1.2 (with .03or 0.04 offset) to start. So I tried lowering the multiplier to 39, which equates to the stock boost clock... same thing... CPU package temp shoots straight up to 100 degrees... I've tried re-seating the cooler a couple times already with different thermal compounds, so I'm sure it's not the issue. So on 39x multiplier, I lowered vcore voltage to 1.15+ 0.03 or 0.04 offset) and it still does the same thing... I keep lowering the vcore voltage lower and lower, and still shoots straight to 100degree / starts throttling...

I thought maybe there's a setting in my Asrock Z87 Fatal1ty Killer board that boosts vcore voltage automatically, but I verified with CPU-Z and HWmonitor that vcore voltage is around 1.1~2 the brief moments I let IBT run...

The computer never crashes though... I let IBT run with CPU getting throttled a few times, just to see if the comp crashes after getting tired of the temp going crazy even with stock speed / low voltage.. never crashes... that's the weird part...

Anyone have this bad of an example??

Main Gaming PC
(8 items)
Wife's Gaming PC
(7 items)
Racing Sim
(8 items)
CPU
Intel Core i9 9900k 5.1Ghz 1.310v AVX Offset 0 Delidded
Motherboard
Gigabyte Z390 Aorus Master
GPU
EVGA GeForce RTX 2080 Ti FTW3 Ultra
RAM
Corsair Vegeance RGB Pro 16GB (2x8) 3466Mhz
Hard Drive
Samsung 970 Pro 512GB + Samsung 860 Evo 1TB
Power Supply
EVGA SuperNOVA G3 850W
Cooling
Corsair H150i Pro
Case
Fractal Design Define R6
CPU
Intel Core i5 9600k
Motherboard
Gigabyte Z390 Aorus Pro
GPU
Gigabyte GeForce RTX 2080 Gaming OC
RAM
Corsair Vegeance LPX 3000Mhz 16GB (2x8GB)
Hard Drive
Samsung 860 Evo 500GB + Western Digital Blue 1TB 7200rpm HDD
Power Supply
SeaSonic 750W
Cooling
Corsair H100i Pro
CPU
Intel Core i7 4770k 4.5Ghz 1.275v
Motherboard
AsRock Z87 Fatal1ty Killer
GPU
Sapphire Radeon RX580 Nitro+ 8GB
RAM
G. Skill Ares 1600Mhz 16GB (2x8GB)
Hard Drive
Samsung 840 Pro 256GB + Western Digital Blue 1TB 7200RPM
Power Supply
SeaSonic G-Series 650W
Cooling
Cooler Master ML240L
Case
Fractal Design Define R4
▲ hide details ▲
pininfarina575 is offline  
post #19689 of 19696 (permalink) Old 12-06-2018, 01:34 PM
New to Overclock.net
 
white owl's Avatar
 
Join Date: Apr 2015
Location: The land of Nod
Posts: 5,374
Rep: 136 (Unique: 103)
It doesn't sound like a dud, sounds like it's hot. It has a tiny cooler plus I'm assuming it's not delidded. Plus you're using a test that's made to get the CPU as hot as possible but it's not really a strss test. What you've described is exactly what I'd expect.

Quote: Originally Posted by SpeedyVT
If you're not doing extreme things to parts for the sake of extreme things regardless of the part you're not a real overclocker.
Quote: Originally Posted by doyll View Post
The key is generally not which brands are good but which specific products are. Motherboards and GPUs are perfect examples of companies having everything from golden to garbage function/quality.
Hot n Bothered
(12 items)
CPU
4790k 4.7Ghz
Motherboard
Asus Sabertooth Z97 MkII 2
GPU
EVGA GTX 1080 SC
RAM
16gb G.Skill Sniper 2400Mhz
Hard Drive
2x Kingston v300 120gb RAID 0
Hard Drive
WD Blue
Power Supply
Seasonic 620w M12 II EVO
Cooling
Cooler Master 212 Evo
Case
Corsair 450D
Operating System
Windows 10
Monitor
Nixeus EDG27
Other
I have pretty lights.
▲ hide details ▲
white owl is offline  
post #19690 of 19696 (permalink) Old 12-29-2018, 04:05 PM
New to Overclock.net
 
Join Date: Dec 2018
Posts: 1
Rep: 0
This guide is still working great as a reference point. I've used it for my 4690k, G3258, and 4770k. However, I think it is time we move up to a x265 stress test for better stability. If whoever made the x264 stress test or can edit it to use the x265 that would be much appreciated.

I got my rigs running the x264 for 24 hours. However they all would crash in actual gaming (wow in this case), and on x265 encoding. I dropped all the multiplier on the rigs down by 1x, and voltage down correspondingly, and they've all been stable for gaming and x265 encoding since. They were on the high end of their max so voltage was up to around 1.4v on all those configs, but temps were not reaching tjmax. Dropping them down by 1x multipliler dropped the voltage levels back down closer to 1.3v which makes me more comfortable for their life span anyways. I've now resorted to just doing handbrake x265 as the benchmark.

I think x265 is more complex and hence a little more demanding than x264 and seems to be more realistic to the peak gaming loads I'm using, but not as extreme as prime95 which I'd never hit from just gaming.

*I'll be trying out this http://hwbot.org/benchmark/hwbot_x265_benchmark_-_4k/ (it also has option for 1080p)
same at any res.
**I guess this is pretty much what I was asking for http://wp.xin.at/archives/4519 but again the test is just so long, I wish it was in shorter loops. I might try to cut the video file down to make the loop smaller if it has a built in loop function.

Last edited by Huy Tran; 12-29-2018 at 04:41 PM.
Huy Tran is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off