The current bsod list for haswell? - Overclock.net - An Overclocking Community

Forum Jump: 

The current bsod list for haswell?

 
Thread Tools
post #1 of 4 (permalink) Old 09-13-2013, 07:29 AM - Thread Starter
New to Overclock.net
 
Hyolyn's Avatar
 
Join Date: Aug 2013
Location: South Korea
Posts: 293
Rep: 5 (Unique: 5)
So I've been told by a moderator over at the rog forums;
Quote:
The BSOD list will be the same as for Ivy due to the very similar architecture of the processors.
Quote:
BSOD codes for overclocking
0x101 = increase vcore
0x124 = increase/decrease QPI/VTT first, if not increase/decrease vcore...have to test to see which one it is
on i7 45nm, usually means too little VVT/QPI for the speed of Uncore
on i7 32nm SB, usually means too little vCore
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1A = Memory management error. It usually means a bad stick of Ram. Test with Memtest or whatever you prefer. Try raising your Ram voltage
0x1E = increase vcore
0x3B = increase vcore
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x109 = Not enough or too Much memory voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r

BSOD Codes for SandyBridge
0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT)
0x101 = add more vcore
0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT
0x1E = add more vcore
0x3B = add more vcore
0xD1 = add QPI/VTT voltage
“0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances”
0X109 = add DDR3 voltage
0x0A = add QPI/VTT voltage

I take no credit at all for this list, i've only posted it from another forum to help users here.
All credits to the original creators, i hope this isn't a re-toast.

Hyolyn is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 09-13-2013, 12:07 PM
New to Overclock.net
 
Forceman's Avatar
 
Join Date: Sep 2012
Posts: 10,879
Rep: 794 (Unique: 514)
I'd have more confidence in that list if it didn't still reference QPI and VTT, which neither Sandy, Ivy, nor Haswell use.

Forceman's Law: Any AMD/Nvidia GPU thread, no matter what the topic, will eventually include a post referencing the GTX 970.
Forceman is offline  
post #3 of 4 (permalink) Old 01-27-2018, 09:02 AM
New to Overclock.net
 
Stealth3si's Avatar
 
Join Date: Jul 2007
Posts: 348
Rep: 2 (Unique: 2)
bsod

0x124 = add/remove vcore or System Agent voltage (usually Vcore, once it was System Agent)
0x101 = add more vcore
0x50 = RAM timings/Frequency add DDR3 voltage or add System Agent
0x1E = add more vcore
0x3B = add more vcore
0xD1 = add System Agentvoltage
“0x9C = System Agent most likely, but increasing vcore has helped in some instances”
0X109 = add DDR3 voltage
0x0A = add System Agent voltage

Last edited by Stealth3si; 01-28-2018 at 12:22 PM.
Stealth3si is offline  
Sponsored Links
Advertisement
 
post #4 of 4 (permalink) Old 01-28-2018, 12:23 PM
New to Overclock.net
 
Stealth3si's Avatar
 
Join Date: Jul 2007
Posts: 348
Rep: 2 (Unique: 2)
Sorry. Did not mean to resurrect. Accident post. Please delete my posts in this thread. Thanks!

9900KF ([email protected]) + Thermalright True Spirit 140 Power █ 2080 Ti XC Ultra Gaming (2025/8250) █ G.SKILL Ripjaws DDR4 16GB (2x8GB) 3200Mhz CL14
Gigabyte Aorus Ultra █ EVGA Supernova 750W G3 █ Cooler Master H500P Mesh
MSI Optix MPG341CQR █ Sony XBR55X900E █ Logitech G613 █ Logitech G700s
Corsair Void Pro RGB █ Sound Blaster Z > O2 Amp > Fostex Massdrop Th-X00 Custom Mod █ Denon AVR-X3300W > Ascend HTM-200 SE + SVS PC-2000
Win10 Pro x64 RS5
Stealth3si is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off