I hv this Memory installed at rampage omega x299.
dual rank 16 gb dims x8 ( 128 gb ram )
what is the problem.
When i was use Prime deluxe x299 xmp profile 3000mhz was work perfect
When i install at omega now i cannot make work xmp profile , i try setup primary timing with manual mod.
i hv errors at prime 95 ( memory and controler test )
if i rune at base jedec no error , 24+ hours test with jedec 2400 17 17 17 39
from MemTweakit screen (Stable jedec )
This what its give me when i use xmp
it was unstable even with sa and io 1.2 , so i find this settings and incress them
and it was stable 4 hours at prime 95 then again errors.
+ i find someting if dissable turnaround time optimization
all this fixed timings go to 15
I realy dont know what i can do for make it stable, if i use deffault with all auto all good( no errors after 24 hours + tests , when try use xmp or set it manual its some where kill stability and i cannot find what timing is do this.
at omega RTL and IOL cannot be fixed ( its no boot if put somting manual )
tRC is unavaliable ( i was think maybe problem at this if this at deffault it's 56 need 55 , but at xmp if it calculated be formula tRC = tRP + tRAS it be 53 ) when at xmp 69