I5 4670K overclock result and question - Overclock.net - An Overclocking Community

Forum Jump: 

I5 4670K overclock result and question

 
Thread Tools
post #1 of 10 (permalink) Old 11-28-2018, 09:27 AM - Thread Starter
New to Overclock.net
 
Join Date: Nov 2018
Posts: 2
Rep: 0
I5 4670K overclock result and question

Hello,

I am pretty new to overclocking and I have overclocked my I5 4670k (see picture)
When using IBT high stress test my temps are (see picture)
I tried 4,5 once and that was stable to with temps around 85 max
I wanna get it to 4,6 is this a bad idea or is it possible easy?
I am afraid my temps go way to high. I am new the only things I understand is voltage and multiplier is there maybe a other setting I can use to run a bit cooler and lower voltage or get 4.6 easier?

Computer Specs:
CPU: Intel i-5 4670k
GPU: Msi Geforce GTX 970
MOBO: MAXIMUS VII HERO
Ram: Kingstone 16 gb ram
Cooling: Corsair H100i V2
SSD: 128 GB
HDD: 1TB

Allready Thanks,
Attached Images
   

Last edited by rafiqvs; 11-28-2018 at 09:30 AM.
rafiqvs is offline  
Sponsored Links
Advertisement
 
post #2 of 10 (permalink) Old 11-29-2018, 03:56 PM
Just a hack
 
mistercoffee1's Avatar
 
Join Date: Jan 2014
Posts: 66
Rep: 6 (Unique: 4)
I don't see what your Uncore or Ring Ratio is. Is it also 4.3Ghz?
If so, try stock multiplier (38), and then bump core up to 4.4 or higher. You may gain another 1 or two multipliers by leaving Uncore/Ring Ratio at stock, without any noticeable decrease in performance.
mistercoffee1 is offline  
post #3 of 10 (permalink) Old 11-29-2018, 04:38 PM
The last VRM burner
 
Join Date: Mar 2018
Posts: 1,198
Rep: 9 (Unique: 7)
Sell this junk H100i and get yourself either Noctua D15 or Raijintek Tisis. On Tisis + Thermal Grizzly Conductonaut I pushed my 4690k to 4.8GHz with 92C under Prime95 (stable but rolled down to 4.7GHz to be able to overclock RAM to 2200MHz from 1866MHz) and in up to mid 60s in CPU intensive games. I also managed to get 5GHz with low 80s in Tera Online, was stable for a few hours and I rolled back cuz temps were obviously too high . Not delided, mind you. Don't touch Cache Ratio as its pointless on these i5s, will either do nothing or hurt performance by a bit.

Don't get suggested by CPU-Z Voltage, it reads VID from Z97 Hero, use HWiNFO and search for Vcore zero to three. If VID of 1.22V is necessary to keep 4.3GHz then you'll most likely hit a wall at 4.7GHz with 1.4V if you manage to keep temps in check by replacing this garbage AiO.

PC for all
(18 items)
CPU
i7 5775c @4.2GHz/3.8GHz
Motherboard
Gigabyte Z97X Gaming 5
GPU
Sapphire Radeon RX580 8GB Nitro+
RAM
2x KHX2400C11D3/8GX 11-12-12-32-1T-250
Hard Drive
Samsung 850 Pro
Hard Drive
Toshiba HDWD10 (P300)
Power Supply
Corsair CS650M
Cooling
Raijintek Tisis + Arctic Cooling MX4
Case
LianLi 330X
Operating System
Windows 10 64-bit Pro
Monitor
Benq GL2250 80Hz
Keyboard
Corsair Strafe Red
Mouse
SteelSeries Rival 310
Mousepad
SteelSeries QCk Mini
Audio
Audio in Motion SC808
Audio
AKG K240 Studio 1st rev
Other
NZXT Hue+
Other
Mayflash F300
▲ hide details ▲
BroadPwns is online now  
Sponsored Links
Advertisement
 
post #4 of 10 (permalink) Old 11-29-2018, 05:31 PM
New to Overclock.net
 
white owl's Avatar
 
Join Date: Apr 2015
Location: The land of Nod
Posts: 5,347
Rep: 135 (Unique: 102)
Cache actually does help minimum framerates. Get your highest core then go for cache...just get what you can out of 1.25v. I've never heard anyone say it can give you worse performance, I really don't see how it could.
As for using IBT it's pretty useless as a stress test. It's more of a heat test, P95 runs cooler and crashes OCs much faster.
Use HWInfo so we can get some useful info.


If you use P95 and HWinfo I could help you out, I've had mine for some time now and using anything other than P95 has resulted in a crash eventually (often after a few minutes into a game).

Quote: Originally Posted by SpeedyVT
If you're not doing extreme things to parts for the sake of extreme things regardless of the part you're not a real overclocker.
Quote: Originally Posted by doyll View Post
The key is generally not which brands are good but which specific products are. Motherboards and GPUs are perfect examples of companies having everything from golden to garbage function/quality.
Hot n Bothered
(12 items)
CPU
4790k 4.7Ghz
Motherboard
Asus Sabertooth Z97 MkII 2
GPU
EVGA GTX 1080 SC
RAM
16gb G.Skill Sniper 2400Mhz
Hard Drive
2x Kingston v300 120gb RAID 0
Hard Drive
WD Blue
Power Supply
Seasonic 620w M12 II EVO
Cooling
Cooler Master 212 Evo
Case
Corsair 450D
Operating System
Windows 10
Monitor
Nixeus EDG27
Other
I have pretty lights.
▲ hide details ▲

Last edited by white owl; 11-29-2018 at 11:17 PM.
white owl is offline  
post #5 of 10 (permalink) Old 11-29-2018, 07:07 PM
New to Overclock.net
 
Scotty99's Avatar
 
Join Date: Jan 2013
Posts: 6,289
Rep: 72 (Unique: 56)
Hmm im also interested, i have a 4670k coming from ebay. Is 1.25v usually good for 4.5ghz on these chips or would that be considered a better than average chip?

Gaming pc
(9 items)
HTPC
(8 items)
CPU
Intel Core i7 8700k
Motherboard
Rog Strix z370-F
GPU
Nvidia Founders Edition RTX 2060
RAM
Gskill Trident-z RGB 3000
Hard Drive
Samsung 960 evo 1tb
Power Supply
EVGA 750 G3
Cooling
NZXT Kraken x62
Case
NZXT S340 elite
Monitor
Dell S2417DG
CPU
AMD Athlon 5350
Motherboard
Asrock AM1B-ITX
RAM
4GB crucial 1600mhz
Hard Drive
OCZ Agility 3 60gb
Case
Linkworld 920-01
Monitor
Vizio Smartcast E55
Keyboard
Logitech K400
Audio
Vizio 3.1 Soundbar
▲ hide details ▲
Scotty99 is offline  
post #6 of 10 (permalink) Old 11-29-2018, 11:14 PM
New to Overclock.net
 
white owl's Avatar
 
Join Date: Apr 2015
Location: The land of Nod
Posts: 5,347
Rep: 135 (Unique: 102)
Quote: Originally Posted by Scotty99 View Post
Hmm im also interested, i have a 4670k coming from ebay. Is 1.25v usually good for 4.5ghz on these chips or would that be considered a better than average chip?
On a 4670k I believe that makes it average or maybe a little better assuming it's 100% stable. Devil's Canyon clocked a bit better for most of us but clock for clock there isn't really a difference in performance. I don't recall the minimum vcore for mine at 4.5Ghz since that was years ago but I remember setting it a bit higher at 1.25v to round it off. I've been running 4.7Ghz with 1.3v for a few years now.

Quote: Originally Posted by SpeedyVT
If you're not doing extreme things to parts for the sake of extreme things regardless of the part you're not a real overclocker.
Quote: Originally Posted by doyll View Post
The key is generally not which brands are good but which specific products are. Motherboards and GPUs are perfect examples of companies having everything from golden to garbage function/quality.
Hot n Bothered
(12 items)
CPU
4790k 4.7Ghz
Motherboard
Asus Sabertooth Z97 MkII 2
GPU
EVGA GTX 1080 SC
RAM
16gb G.Skill Sniper 2400Mhz
Hard Drive
2x Kingston v300 120gb RAID 0
Hard Drive
WD Blue
Power Supply
Seasonic 620w M12 II EVO
Cooling
Cooler Master 212 Evo
Case
Corsair 450D
Operating System
Windows 10
Monitor
Nixeus EDG27
Other
I have pretty lights.
▲ hide details ▲
white owl is offline  
post #7 of 10 (permalink) Old 11-29-2018, 11:15 PM
The last VRM burner
 
Join Date: Mar 2018
Posts: 1,198
Rep: 9 (Unique: 7)
1.25V and 4.5GHz is actually rather low, I did 1.26V and 4.6GHz. And believe me, when I say bumping cache up gave me only worse performance and stability issues then I mean it. If course, the decrease was minimal but it deffinitely wasn't an increase.

PC for all
(18 items)
CPU
i7 5775c @4.2GHz/3.8GHz
Motherboard
Gigabyte Z97X Gaming 5
GPU
Sapphire Radeon RX580 8GB Nitro+
RAM
2x KHX2400C11D3/8GX 11-12-12-32-1T-250
Hard Drive
Samsung 850 Pro
Hard Drive
Toshiba HDWD10 (P300)
Power Supply
Corsair CS650M
Cooling
Raijintek Tisis + Arctic Cooling MX4
Case
LianLi 330X
Operating System
Windows 10 64-bit Pro
Monitor
Benq GL2250 80Hz
Keyboard
Corsair Strafe Red
Mouse
SteelSeries Rival 310
Mousepad
SteelSeries QCk Mini
Audio
Audio in Motion SC808
Audio
AKG K240 Studio 1st rev
Other
NZXT Hue+
Other
Mayflash F300
▲ hide details ▲
BroadPwns is online now  
post #8 of 10 (permalink) Old 11-30-2018, 03:49 PM - Thread Starter
New to Overclock.net
 
Join Date: Nov 2018
Posts: 2
Rep: 0
Thanks for all the help and info.. white owl tomorow I will test it with p95 and hwinf and hopefully you can help me out.
rafiqvs is offline  
post #9 of 10 (permalink) Old 11-30-2018, 05:18 PM
New to Overclock.net
 
white owl's Avatar
 
Join Date: Apr 2015
Location: The land of Nod
Posts: 5,347
Rep: 135 (Unique: 102)
What ratio did you have your cache set to?
My cache just works at 4.3, tried 4.4 and started having problems and went back. Either way I wouldn't leave it stock, get what you can and call it a day.

It's kinda hard to say what's average though. I've never seen anyone else do 5ghz with a turd air cooler so I assumed mine was decent.

Quote: Originally Posted by SpeedyVT
If you're not doing extreme things to parts for the sake of extreme things regardless of the part you're not a real overclocker.
Quote: Originally Posted by doyll View Post
The key is generally not which brands are good but which specific products are. Motherboards and GPUs are perfect examples of companies having everything from golden to garbage function/quality.
Hot n Bothered
(12 items)
CPU
4790k 4.7Ghz
Motherboard
Asus Sabertooth Z97 MkII 2
GPU
EVGA GTX 1080 SC
RAM
16gb G.Skill Sniper 2400Mhz
Hard Drive
2x Kingston v300 120gb RAID 0
Hard Drive
WD Blue
Power Supply
Seasonic 620w M12 II EVO
Cooling
Cooler Master 212 Evo
Case
Corsair 450D
Operating System
Windows 10
Monitor
Nixeus EDG27
Other
I have pretty lights.
▲ hide details ▲
white owl is offline  
post #10 of 10 (permalink) Old 11-30-2018, 05:32 PM
dissatisfied laypleb
 
Jonny321321's Avatar
 
Join Date: Nov 2009
Posts: 379
Rep: 3 (Unique: 1)
My old delidded 4670k wouldn't hit 4.6Ghz (using a 125 strap) without 1.5V, and needed 1.46V for 4.5Ghz Obviously lost that lottery, so I hope you win.

cool
(12 items)
CPU
i7 9700k @ 5.1GHz 1.4V
Motherboard
Asrock Z390 Phantom Gaming ITX-ac
GPU
AMD Vega 54 w/ Morpheus II VGA heatsink & 64 BIOS
RAM
Patriot Viper 2 x 8 GB 3200 Mhz DDR4 RAM @ 3500 CL16
Hard Drive
SAMSUNG SM951 256GB NVMe
Hard Drive
SAMSUNG 840 EVO 250GB
Power Supply
Seasonic SSR-850FX - Focus Plus Gold 850W
Monitor
Alienware AW2518HF 240hz
Keyboard
CM Masterkeys Pro S w/ Kailh Box Blacks
Mouse
G303, G100s, FK, G403, G203, Abyssus V1, Venator, Aurora, ZA13, EC2, Kinzu V2, Kinzu V3, Kana V2, KPO, Rival, Rival 310, Sensei 310
Mousepad
Qck Heavy, Qck+, Shidenkai, G440, Hayate Otsu, Hien
Audio
Philips Fidelio X2s
▲ hide details ▲
Jonny321321 is offline  
Reply

Tags
Overclock

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off