i7-2600k + Asus P8Z68-V LX Overclock need help - Overclock.net - An Overclocking Community
Forum Jump: 

i7-2600k + Asus P8Z68-V LX Overclock need help

Reply
 
Thread Tools
post #1 of 69 (permalink) Old 02-09-2020, 03:09 PM - Thread Starter
New to Overclock.net
 
Join Date: Feb 2020
Posts: 23
Rep: 0
i7-2600k + Asus P8Z68-V LX Overclock need help

Hey all

I have a i7 2600k that I would like a little more power from (4.3-4.4 MHz?).
I tried these settings (from a similar topic in this forum) but after 2 minutes prime95 would just crash BSoD.

Ai Tweaker > Ai Overclock Tuner: Manual
Ai Tweaker > BCLK/PCIE Frequency: 100.0
Ai Tweaker > Turbo Ratio: By All Cores
Ai Tweaker > By All Cores (Can Adjust in OS): 43
Ai Tweaker > Internal PLL Overvoltage: Disabled
Ai Tweaker > Memory Frequency: Auto
Ai Tweaker > EPU Power Saving Mode: Disabled
Ai Tweaker\ CPU Power Management > CPU Ratio: Auto
Ai Tweaker\ CPU Power Management > Enhanced Intel SpeedStep Technology: Enabled
Ai Tweaker\ CPU Power Management > Turbo Mode: Enabled
Ai Tweaker\ CPU Power Management > everything else on Auto
Ai Tweaker > Load-Line Calibration: Disabled
Ai Tweaker > Offset Mode Sign: +
Ai Tweaker > CPU Voltage: 1.170V (+0.005)
Ai Tweaker > CPU Spread Spectrum: Disabled
Advanced\ CPU Configuration > CPU Ratio: Auto
Advanced\ CPU Configuration > Intel Adaptive Thermal Monitor: Enabled
Advanced\ CPU Configuration > Hyper-threading: Enabled
Advanced\ CPU Configuration > Active Processor Cores: All
Advanced\ CPU Configuration > Limit CPUID Maximum: Disabled
Advanced\ CPU Configuration > Execute Disable Bit: Enabled
Advanced\ CPU Configuration > Intel Virtualization Technology: Disabled
Advanced\ CPU Configuration > Enhanced Intel SpeedStep Technology: Enabled
Advanced\ CPU Configuration > Turbo Mode: Enabled
Advanced\ CPU Configuration > CPU C1E: Enabled
Advanced\ CPU Configuration > CPU C3 Report: Disabled
Advanced\ CPU Configuration > CPU C6 Report: Disabled

Could you help me please?

Current Build
i7-2600k
ASUS P8Z68-V LX (v0602 (09/13/2011)
Zalman CNPS10X Performa
Transcend JM1333KLN-4G 4 GB DDR3-1333 DDR3 SDRAM x2
SK Hynix HMT351U6CFR8C-H9 4 GB DDR3-1333 DDR3 SDRAM x2
Chieftec GPM-750C

BIOS
Click image for larger version

Name:	bios.jpg
Views:	12
Size:	478.7 KB
ID:	325694

AIDA64 cpu test
Click image for larger version

Name:	last cpu offset+0005 (LLC Disable).jpg
Views:	12
Size:	764.1 KB
ID:	325696

AIDA64 fpu test
Click image for larger version

Name:	last fpu offset+0005 (LLC Disable).jpg
Views:	11
Size:	778.8 KB
ID:	325698

DDR3
Click image for larger version

Name:	memory.jpg
Views:	11
Size:	616.9 KB
ID:	325700

sorry for my english i use google translator

Last edited by Olga-v; 02-13-2020 at 02:17 AM.
Olga-v is offline  
Sponsored Links
Advertisement
 
post #2 of 69 (permalink) Old 02-09-2020, 03:20 PM
Senior OCN Member
 
shilka's Avatar
 
Join Date: Oct 2011
Location: Denmark
Posts: 39,292
Rep: 2802 (Unique: 1655)
The PSU you have is not all that good and is probably holding the rest of the system back

Dreissen
(27 items)
Seravee
(18 items)
CPU
Ryzen 3700x
Motherboard
Asrock x570 Taichi
GPU
MSI RTX 2070 Super Gaming X Trio
RAM
G Skill TridentZ
Hard Drive
Corsair Force MP510 1,92 TB
Hard Drive
Seagate IronWolf Pro ST14000NE0008
Hard Drive
Seagate Ironwolf ST12000VN0007
Hard Drive
Seagate IronWolf Pro ST12000NE0007
Hard Drive
WD Ultrastar DC HC530 14 TB
Hard Drive
Seagate IronWolf Pro ST16000NE000
Power Supply
Seasonic Prime Ultra Titanium 750 watt
Cooling
Noctua NH-U12S Chromax
Case
Phanteks Luxe 2
Operating System
Windows 10 Home 64 bit
Monitor
Asus PG279Q
Monitor
LG 55C8
Keyboard
Corsair Strafe RGB MK.2 with Cherry MX Silent
Mouse
Roccat Kone EMP
Mousepad
HyperX Fury S XL
Audio
Onkyo TX NR646
Audio
RHA L1 Dacamp
Audio
Sennheiser HD 599
Audio
Dali E 12 F
Audio
2x Dali Opticon 1
Audio
2x Dali Opticon 2
Audio
Dali Opticon Vokal
Other
Vegas MBA 60cm LED Strip
CPU
Intel Core I7 6850K
Motherboard
Gigabyte X99 Ultra Gaming
GPU
GTX 1060 3 GB wth blower style cooler
RAM
Kingston HyperX DDR4 Savage 3000 MHz
Hard Drive
Samsung 840 Evo 500 GB
Hard Drive
Samsung 860 Evo 1 TB
Optical Drive
LG CH12NS30
Power Supply
Seasonic Focus GX 650 watt
Cooling
Noctua NH-D15S
Case
Phanteks Enthoo Luxe Tempered Glass
Operating System
Windows 7 Ultimate 64 bit
Operating System
Windows 10 Home 64 bit
Monitor
AOC 24G2U
Keyboard
Corsair Gaming STRAFE RGB Mechanical
Mouse
Roccat Kone EMP
Mousepad
Roccat Sense Metor
Audio
Sennheiser HD 598
Other
CableMod 30 CM Magnetic Red LED strip
Monitor
LG 24MP59G-P
Mouse
Logitech MX518 Hero
Other
Delock PCI-E to M.2 NVME Adaptor Card
▲ hide details ▲
shilka is online now  
post #3 of 69 (permalink) Old 02-09-2020, 03:21 PM
9 Cans of Ravioli
 
The Pook's Avatar
 
Join Date: May 2006
Posts: 18,094
Rep: 1326 (Unique: 704)
edit: just noticed your screenshot shows 1.25v ... but your post and and screenshot of the BIOS shows 1.17v.

what's your vCore?

1.17v is no where near enough voltage for a 4.3 - 4.4 2600K, so if that's what it's getting then that's not enough. try 1.35v and keep an eye on temps. if it's stable then lower it but you likely will need at least 1.3v.

Intel i9 9900K Coffee Lake @ X8 5309mhz (+47.5%)
AMD FX-8320 Vishera @ X4 5022mhz (+43.5%)
Intel i5 4690K Haswell @ X4 5013mhz (+43.2%)
AMD X4 960T Zosma @ X6 4870mhz (+62.3%)
Intel i7 6700 Skylake @ X4 4709mhz (+38.5%)
Intel i5 6400 Skylake @ X4 4588mhz (+69.9%)
2 OP pls nerf
(24 items)
NUC U
(10 items)
CPU
i9 9900K
Motherboard
AsRock Z390 Taichi
GPU
MSI GTX 1080 Ti
RAM
G.Skill DDR4 4133 32GB
Hard Drive
XPG SX8200 Pro NVMe 2TB
Hard Drive
HP EX950 NVMe 2TB
Hard Drive
2x Samsung 860 1TB RAID 0
Hard Drive
Toshiba X300 5TB
Hard Drive
Western Digital EZRZ 3TB
Power Supply
Seasonic Focus Plus Gold 750w
Cooling
Corsair H115i Pro
Cooling
Raijintek Morpheus II
Case
Fractal Design Meshify S2
Operating System
Windows 10 Education x64
Monitor
Acer XF270HU 27" 1440p
Monitor
LG 24UD58 24" 4K
Keyboard
CoolerMaster MK730 (Blues)
Mouse
Logitech G502
Mouse
Glorious Model D
Audio
Klipsch PowerGate + Schiit Hel
Audio
Micca RB42
Audio
Philips Fidelio X2
Audio
Philips SHP9500S
Audio
Audio Technica ATH-M50X
CPU
i3 8109U
Motherboard
Intel NUC8i3BEH
GPU
Iris Plus 655
RAM
Kingston DDR4 2400 16GB
Hard Drive
Mushkin Pilot NVMe 1TB
Hard Drive
SanDisk Ultra II 480GB
Operating System
Windows 10 Professional
Operating System
MX Linux
Keyboard
Dierya DK63-BT 60% (Outemu Blue)
Mouse
Logitech G603 Wireless
CPU
i7 860
Motherboard
Advantech AIMB 280 ITX
GPU
EVGA GTX 950 2GB
RAM
Kingston 2GB DDR3 1333
Hard Drive
Seagate Momentus 2.5" 500GB
Hard Drive
Western Digital Blue 2.5" 320GB
Power Supply
Silverstone SFX-L Gold 500w
Cooling
Arctic Alpine 11 GT 2
Case
Silverstone Milo Z ML07B
Operating System
Windows XP x86 SP3
Keyboard
CoolerMaster MasterKeys Pro S (Browns)
Mouse
Logitech M512
▲ hide details ▲



Last edited by The Pook; 02-09-2020 at 03:24 PM.
The Pook is online now  
Sponsored Links
Advertisement
 
post #4 of 69 (permalink) Old 02-09-2020, 04:06 PM - Thread Starter
New to Overclock.net
 
Join Date: Feb 2020
Posts: 23
Rep: 0
Quote: Originally Posted by shilka View Post
The PSU you have is not all that good and is probably holding the rest of the system back
then it will not work with him?

Quote: Originally Posted by The Pook View Post
edit: just noticed your screenshot shows 1.25v ... but your post and and screenshot of the BIOS shows 1.17v.

what's your vCore?

1.17v is no where near enough voltage for a 4.3 - 4.4 2600K, so if that's what it's getting then that's not enough. try 1.35v and keep an eye on temps. if it's stable then lower it but you likely will need at least 1.3v.
all screenshots are correct
I don 't know why , maybe something 's wrong in settings?
BIOS - 1.17v but in AIDA64 system stability test 1.256 in fpu stability test and 1.272 in cpu stability test
ok i will try it thanks!

these are all my settings
Click image for larger version

Name:	1.jpg
Views:	3
Size:	597.9 KB
ID:	325716
Click image for larger version

Name:	2.jpg
Views:	4
Size:	435.0 KB
ID:	325718
Click image for larger version

Name:	3.jpg
Views:	5
Size:	504.0 KB
ID:	325720
Click image for larger version

Name:	4.jpg
Views:	5
Size:	481.4 KB
ID:	325722
Click image for larger version

Name:	5.jpg
Views:	4
Size:	523.9 KB
ID:	325724
Click image for larger version

Name:	6.jpg
Views:	3
Size:	443.8 KB
ID:	325726
Click image for larger version

Name:	7.jpg
Views:	3
Size:	505.0 KB
ID:	325728

Last edited by Olga-v; 02-09-2020 at 04:18 PM.
Olga-v is offline  
post #5 of 69 (permalink) Old 02-09-2020, 04:17 PM
9 Cans of Ravioli
 
The Pook's Avatar
 
Join Date: May 2006
Posts: 18,094
Rep: 1326 (Unique: 704)
bump the voltage to ~1.35v then, CPU-Z isn't really the right software to monitor it anyway. it's safe as long as you can cool it properly.

Intel i9 9900K Coffee Lake @ X8 5309mhz (+47.5%)
AMD FX-8320 Vishera @ X4 5022mhz (+43.5%)
Intel i5 4690K Haswell @ X4 5013mhz (+43.2%)
AMD X4 960T Zosma @ X6 4870mhz (+62.3%)
Intel i7 6700 Skylake @ X4 4709mhz (+38.5%)
Intel i5 6400 Skylake @ X4 4588mhz (+69.9%)
2 OP pls nerf
(24 items)
NUC U
(10 items)
CPU
i9 9900K
Motherboard
AsRock Z390 Taichi
GPU
MSI GTX 1080 Ti
RAM
G.Skill DDR4 4133 32GB
Hard Drive
XPG SX8200 Pro NVMe 2TB
Hard Drive
HP EX950 NVMe 2TB
Hard Drive
2x Samsung 860 1TB RAID 0
Hard Drive
Toshiba X300 5TB
Hard Drive
Western Digital EZRZ 3TB
Power Supply
Seasonic Focus Plus Gold 750w
Cooling
Corsair H115i Pro
Cooling
Raijintek Morpheus II
Case
Fractal Design Meshify S2
Operating System
Windows 10 Education x64
Monitor
Acer XF270HU 27" 1440p
Monitor
LG 24UD58 24" 4K
Keyboard
CoolerMaster MK730 (Blues)
Mouse
Logitech G502
Mouse
Glorious Model D
Audio
Klipsch PowerGate + Schiit Hel
Audio
Micca RB42
Audio
Philips Fidelio X2
Audio
Philips SHP9500S
Audio
Audio Technica ATH-M50X
CPU
i3 8109U
Motherboard
Intel NUC8i3BEH
GPU
Iris Plus 655
RAM
Kingston DDR4 2400 16GB
Hard Drive
Mushkin Pilot NVMe 1TB
Hard Drive
SanDisk Ultra II 480GB
Operating System
Windows 10 Professional
Operating System
MX Linux
Keyboard
Dierya DK63-BT 60% (Outemu Blue)
Mouse
Logitech G603 Wireless
CPU
i7 860
Motherboard
Advantech AIMB 280 ITX
GPU
EVGA GTX 950 2GB
RAM
Kingston 2GB DDR3 1333
Hard Drive
Seagate Momentus 2.5" 500GB
Hard Drive
Western Digital Blue 2.5" 320GB
Power Supply
Silverstone SFX-L Gold 500w
Cooling
Arctic Alpine 11 GT 2
Case
Silverstone Milo Z ML07B
Operating System
Windows XP x86 SP3
Keyboard
CoolerMaster MasterKeys Pro S (Browns)
Mouse
Logitech M512
▲ hide details ▲


The Pook is online now  
post #6 of 69 (permalink) Old 02-10-2020, 04:50 AM - Thread Starter
New to Overclock.net
 
Join Date: Feb 2020
Posts: 23
Rep: 0
I can not understand (
why bios - 1.190v but AIDA64 system stability test - 1.288 (cpu)\ 1.272 (fpu)
why is the temperature higher than bios ?
i need 1.35v in bios or AIDA64 system stability test?

Click image for larger version

Name:	bioc.jpg
Views:	2
Size:	546.4 KB
ID:	325830
Click image for larger version

Name:	+025last fpu offset (LLC Disable).jpg
Views:	2
Size:	777.1 KB
ID:	325832
Click image for larger version

Name:	+025 last cpu offset (LLC Disable).jpg
Views:	3
Size:	764.8 KB
ID:	325834

can you please say what right software to monitor?
Thank you!
Olga-v is offline  
post #7 of 69 (permalink) Old 02-11-2020, 04:45 PM - Thread Starter
New to Overclock.net
 
Join Date: Feb 2020
Posts: 23
Rep: 0
Hey all!
Tell me please
Did I make the right all settings?

Ai Tweaker > Ai Overclock Tuner: Manual
Ai Tweaker > BCLK/PCIE Frequency: 100.0
Ai Tweaker > Turbo Ratio: By All Cores
Ai Tweaker > By All Cores (Can Adjust in OS): 44
Ai Tweaker > Internal PLL Overvoltage: Disabled
Ai Tweaker > Memory Frequency: Auto
Ai Tweaker > EPU Power Saving Mode: Disabled
Ai Tweaker > DRAM Timing Control: Auto
Ai Tweaker\ CPU Power Management > CPU Ratio: Auto
Ai Tweaker\ CPU Power Management > Enhanced Intel SpeedStep Technology: Enabled
Ai Tweaker\ CPU Power Management > Turbo Mode: Enabled
Ai Tweaker\ CPU Power Management > everything else on Auto
Ai Tweaker > Load-Line Calibration: - Disabled
Ai Tweaker > Offset Mode Sign: +
Ai Tweaker > CPU Spread Spectrum: Disabled
Advanced\ CPU Configuration > CPU Ratio: Auto
Advanced\ CPU Configuration > Intel Adaptive Thermal Monitor: Enabled
Advanced\ CPU Configuration > Hyper-threading: Enabled
Advanced\ CPU Configuration > Active Processor Cores: All
Advanced\ CPU Configuration > Limit CPUID Maximum: Disabled
Advanced\ CPU Configuration > Execute Disable Bit: Enabled
Advanced\ CPU Configuration > Intel Virtualization Technology: Disabled
Advanced\ CPU Configuration > Enhanced Intel SpeedStep Technology: Enabled
Advanced\ CPU Configuration > Turbo Mode: Enabled
Advanced\ CPU Configuration > CPU C1E: Enabled
Advanced\ CPU Configuration > CPU C3 Report: Disabled
Advanced\ CPU Configuration > CPU C6 Report: Disabled
Ai Tweaker > CPU Voltage: 1.205 (0.040) - why is 0.040 text yellow?
Click image for larger version

Name:	IMG_20200211_222137.jpg
Views:	3
Size:	5.05 MB
ID:	326188

BIOS: 1.205 (0.040) =
AIDA64 system stability test cpu (2min) - 1.304V / 57С
AIDA64 system stability test fpu (2min) - 1.288V / 69С
LinX 0.6.4 - test (10 min) - 1.304V / 69С
*sometimes I notice short jumps 1.328V

fpu
Click image for larger version

Name:	all.jpg
Views:	4
Size:	897.8 KB
ID:	326198

Last edited by Olga-v; 02-13-2020 at 02:16 AM.
Olga-v is offline  
post #8 of 69 (permalink) Old 02-13-2020, 02:09 AM - Thread Starter
New to Overclock.net
 
Join Date: Feb 2020
Posts: 23
Rep: 0
х44 (+0.040) – prime95 crash BSoD
х44 (+0.065) – prime95 crash BSoD
х44 (+0.075) – prime95 crash BSoD *(+0.075 = 1.336v prime95)

something is wrong

Last edited by Olga-v; 02-13-2020 at 02:12 AM.
Olga-v is offline  
post #9 of 69 (permalink) Old 02-13-2020, 02:18 AM
High IQ Person
 
DAM20's Avatar
 
Join Date: Jan 2018
Location: Italy
Posts: 234
Rep: 4 (Unique: 4)
Use a bit of LLC

Yeetus
(10 items)
Brother's heater
(10 items)
CPU
Ryzen 2700X (10x -0.1)
Motherboard
Crosshair VII Hero (WiFi)
GPU
Sapphire RX 5700XT Nitro+ SE
RAM
G.Skill 3466 C14
Hard Drive
Crucial P1
Hard Drive
Seagate Barracuda
Power Supply
XFX XTR P1-750B-BEFX
Cooling
NH-D15 AM4
Case
Dark Base 900 Pro
Operating System
Windows 10 Pro
CPU
Ryzen 2600X (10x -0.05)
Motherboard
ROG STRIX X470-F GAMING
GPU
XFX RX480 GTR (580 BIOS) 1430/2010
RAM
Vengeance LPX 3466 c16
Hard Drive
Crucial P1
Hard Drive
Seagate Barracuda
Power Supply
ANTEC HCG-750-GOLD
Cooling
Corsair H100i
Case
NZXT H510i
Operating System
Windows 10 Pro
▲ hide details ▲
DAM20 is offline  
post #10 of 69 (permalink) Old 02-13-2020, 02:22 AM
PC Gamer
 
oxidized's Avatar
 
Join Date: Jul 2014
Location: Rome, IT
Posts: 1,363
Rep: 26 (Unique: 24)
Quote: Originally Posted by shilka View Post
The PSU you have is not all that good and is probably holding the rest of the system back
Are you trolling?
oxidized is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off