Overclocking 10900k results, bins and discussion - Page 14 - Overclock.net - An Overclocking Community
Forum Jump: 

Overclocking 10900k results, bins and discussion

Reply
 
Thread Tools
post #131 of 249 (permalink) Old 05-23-2020, 09:49 AM
New to Overclock.net
 
newls1's Avatar
 
Join Date: Jun 2007
Location: Atlanta GA
Posts: 1,618
Rep: 40 (Unique: 29)
Quote: Originally Posted by Falkentyne View Post
170A @ 1.252v ...

Max VID=1.520v without SVID VRM offset mode (command 33h disabled),
Max IOUT=245A
VRM Loadline: 1.1 mOhm

1520mv - (1.1 mOhm * 170A)=1333mv=1.333v.

You're safe with 80mv of leeway. Good job.
You really did all this, not me! I appreciate you. Setting SVID behavior to "trained" and not "Worst case senario" lowered VID.. this is pretty much all Auto OC letting SVID do my numbers. I still havent figured out manual vcore settings yet because once i disable SVID, my OC goes to ****. Asus really integrated A HUGE AMOUNT of "AI" in these boards that help alot... seems like this is the 1st time ever, that leaving things on auto work better... atleast for me

**Intel System** Asus Z390E Strix / 8700k @ 4.85Ghz / 32GB BDie @ 3200 CL14 / PowerColor 5700XT / eVGA 850w PSU / Sammy 960 EVO m.2 / MX500 250gb games SSD / 49" Samsung UltraWide 144Hz

**Games Only** Asus Maximus Formula XII / i9 10900k @ 5.2GHz / 32gb 4x8GB Patriot Viper DDR4 4400 @ 4000MTs / 2080Ti / Everything watercooled using Dual Loops and many 420mm rads


newls1 is offline  
Sponsored Links
Advertisement
 
post #132 of 249 (permalink) Old 05-23-2020, 01:44 PM
New to Overclock.net
 
Exilon's Avatar
 
Join Date: Jun 2007
Posts: 1,183
Rep: 91 (Unique: 57)
You should just use SVID for daily use.

Exilon is offline  
post #133 of 249 (permalink) Old 05-23-2020, 02:01 PM
New to Overclock.net
 
MazrimCF's Avatar
 
Join Date: Aug 2015
Posts: 76
Rep: 0
What types of coolers are you all using? i'm on an Enermax 360 and I idle in the mid 40's with my 10900k in the Hero XII no OC just XMP enabled that I just put together this morning. I'm not sure if I got a dud cpu or this Enermax needs better fans or even a better aio

MazrimCF is offline  
Sponsored Links
Advertisement
 
post #134 of 249 (permalink) Old 05-24-2020, 12:21 AM
New to Overclock.net
 
elmor's Avatar
 
Join Date: Mar 2014
Posts: 873
Rep: 354 (Unique: 158)
Quote: Originally Posted by Falkentyne View Post
So the VID you see in windows is = vCPU + (ACLL mOhms * dI) - (DCLL mOhms * I))

Where dI=d1-d0 @elmor help me what is this? and I is IOUT.
d1 and d0 should be the two different output currents you're going between.

Example:

1. Idle and ready to start the benchmark, output current = 10A. This is your starting point d0 = 10A.
2. Start running the benchmark, output current = 100A. This is your final value d1 = 100A.

This means the difference/delta in output current dI = d1 - d0 = 100A - 10A = 90A. This is also called the load step.
elmor is offline  
post #135 of 249 (permalink) Old 05-24-2020, 12:42 AM - Thread Starter
Facepalm
 
Falkentyne's Avatar
 
Join Date: Dec 2007
Location: Riverside
Posts: 7,369
Rep: 441 (Unique: 306)
Quote: Originally Posted by elmor View Post
d1 and d0 should be the two different output currents you're going between.

Example:

1. Idle and ready to start the benchmark, output current = 10A. This is your starting point d0 = 10A.
2. Start running the benchmark, output current = 100A. This is your final value d1 = 100A.

This means the difference/delta in output current dI = d1 - d0 = 100A - 10A = 90A. This is also called the load step.
Thank you Elmor! Congratulations on the 10900k world LN2 record you got. Did you beat Hicookie?

[email protected] ghz, RX Vega 64, 32GB DDR4, Gigabyte Aorus Master, Seasonic Platinum 1000W, Corsair 760T
Alt: MSI GT73VR Throttlebook with 7820HK @ 4.7 ghz, GTX 1070 MXM TDP mod to 230W, 32 GB RAM

Quote: Originally Posted by sakete View Post
Well, I want you to know I have an academic degree in speculation.
Falkentyne is offline  
post #136 of 249 (permalink) Old 05-24-2020, 02:56 AM
New to Overclock.net
 
newls1's Avatar
 
Join Date: Jun 2007
Location: Atlanta GA
Posts: 1,618
Rep: 40 (Unique: 29)
Quote: Originally Posted by MazrimCF View Post
What types of coolers are you all using? i'm on an Enermax 360 and I idle in the mid 40's with my 10900k in the Hero XII no OC just XMP enabled that I just put together this morning. I'm not sure if I got a dud cpu or this Enermax needs better fans or even a better aio
im on a full custom loop dedicated for cpu only using 1 420 EK 60mm thick rad in push/pull and a 240 rad in push, with 2 D5's pumps in a "serial" EK dual pump block and a Heatkiller ProIV all copper waterblock with slightly stiffer mounting springs for more pressure. I idle in the mid 20's in a 67f room. under extreme full 100% stress testing load, i havent yet seen a single core go over 74c. Ill have to post a few pics of my water setup in the watercooling thread soon, im really happy with how it all turned out. here is a quick pic i took after filling loops with coolant. Blue loop is "CPU" and green is "GPU".. you can see the roof of the case houses my 2 420mm rads in push/pull (1 is for cpu, 1 for gpu) and in the lower portion of case, i have my 240 rad in push for the 2ndry rad for cpu loop. with the 2 D5's in the cpu loop, the flow is ridiculous!
Attached Thumbnails
Click image for larger version

Name:	looop.jpg
Views:	23
Size:	313.5 KB
ID:	348856  


**Intel System** Asus Z390E Strix / 8700k @ 4.85Ghz / 32GB BDie @ 3200 CL14 / PowerColor 5700XT / eVGA 850w PSU / Sammy 960 EVO m.2 / MX500 250gb games SSD / 49" Samsung UltraWide 144Hz

**Games Only** Asus Maximus Formula XII / i9 10900k @ 5.2GHz / 32gb 4x8GB Patriot Viper DDR4 4400 @ 4000MTs / 2080Ti / Everything watercooled using Dual Loops and many 420mm rads



Last edited by newls1; 05-24-2020 at 03:07 AM.
newls1 is offline  
post #137 of 249 (permalink) Old 05-24-2020, 03:53 AM
New to Overclock.net
 
Join Date: Jul 2019
Posts: 54
Rep: 15 (Unique: 8)
Quote: Originally Posted by Falkentyne View Post
Thank you Elmor! Congratulations on the 10900k world LN2 record you got. Did you beat Hicookie?
"Famous overclocker Elmor overclocked the 10900K to 7.7GHz on 1.194v ...."
shamino1978 is offline  
post #138 of 249 (permalink) Old 05-24-2020, 04:09 AM
New to Overclock.net
 
elmor's Avatar
 
Join Date: Mar 2014
Posts: 873
Rep: 354 (Unique: 158)
Quote: Originally Posted by shamino1978 View Post
"Famous overclocker Elmor overclocked the 10900K to 7.7GHz on 1.194v ...."
Seems legit I don't think hicookie was competing in the CPU-Z validation category this time around.
elmor is offline  
post #139 of 249 (permalink) Old 05-24-2020, 04:17 AM
Overclocker in training
 
ThrashZone's Avatar
 
Join Date: Apr 2017
Location: Texas
Posts: 11,438
Rep: 170 (Unique: 103)
Quote: Originally Posted by 86Jarrod View Post
Here's the VF points for my current oc. Plus Aida stress FPU only. Thanks for all the awesome info in the thread!
Hi,
What is your system spec's and cooling on this monster lol
Add it as plain text to your signature if you'd be so kind

This is pretty wild too
https://www.overclock.net/forum/atta...2&d=1590197028

CPU
i9-9940x With Optimus Foundation copper-plexi and Heatkiller VRM copper-plexi water block
Motherboard
ASUS x299 Rampage VI Apex
GPU
Titan Xp with copper-plexi Water Block
RAM
Trident Z 3600C16 4x8gb's b-die default timings 16-16-16-36
Hard Drive
Samsung 970 Evo Plus 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Optical Drive
LG Blu-Ray WH16NS40
Power Supply
evga 1200-P2
Cooling
D5 pump reservoir combo/ GTX280/ VRM block/ GTX280/ D5 top/ CPU block/ GPU block/ Mora 360/ repeat.
Cooling
MO-RA3 360 PRO stainless steel (25022)
Case
corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 pro & 10 pro Win-7 Primary os.
Monitor
ASUS VG248QE 24" 144Hz
Keyboard
Logitech G910 Orion spectrum
Mouse
Redragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
Other
5.0/https://valid.x86.fr/ez2ifr
CPU
i7-5930k with Heatkiller IV Pro Plexi-Copper and koolance vrm water blocks
Motherboard
X99 Sabertooth
GPU
EVGA 1080ti FTW3 with Water block
RAM
Trident-Z 3200C14 4x8gb's b-die default timings 14-14-14-34
Hard Drive
Samsung 970 Evo 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Optical Drive
LG Blu-Ray WH16NS40
Power Supply
EVGA 1000-P2
Cooling
D5 reservior combo/ 240GTX/ Koolance VRM block/ 240GTX/ D5 Top/ CPU block/ Gpu block/ Mora 360LT/ back to reservoir
Cooling
Mora 360LT black 25000
Case
Corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 and 10 pro Win-7 Primary os.
Monitor
AOC G2460PG 24"G-Sync 144Hz
Keyboard
Logitech G710+
Mouse
Red Dragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
CPU
10900k
Hard Drive
Samsung 970 evo 500gb
Power Supply
EVGA 1000P2
Case
Corsair 450D
Operating System
VapeWild RazzleBerry 50-50-0mg nic
▲ hide details ▲
ThrashZone is online now  
post #140 of 249 (permalink) Old 05-24-2020, 04:31 AM
New to Overclock.net
 
Join Date: Apr 2020
Posts: 143
Rep: 0
The 10900k looks like a blast to play with. Once I can afford custom watercooling i'll have to switch over to z490/10900k as I hear z490 will also support rocket lake, nice to have an upgrade path on the same chipset. Can't wait to see the memory OCs the ddr4 thread churns out.

[email protected]5.3GHz 8C/8T | [4x8GB]4200MHz 14-14-14-30-2T https://i.imgur.com/mAuTHN8.png
XGS-Duplicity is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 19 (1 members and 18 guests)
Pinto
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off