Wow, an official RP thread, here, in OC ! I'm in !
So, the project:
- a Z wave plus razberry daughter card
- an home automation software (to be defined, which one)
- a proof of concept of a working home automation
The RP3 is cool for this because the controller can be sneaked out anywhere without taking
space. It's largely powerful enough for simple HA. Also, the ethernet port will probably come handy
for remote operation.
Here goes. Parts to be ordered this WE.
If anyone has any inputs for the above, they are very welcome.
 looks like jeedom is gonna be my choice of software to begin with. Next will be home assistant.
[edit2 21/11/2017] OK, I installed raspbian stretch from sept. 2017. The razberry card was also installed. Turned out, the z-way server couldn't boot, due to a missing 1.0.0 SSL lib (post 4 of https://forum.z-wave.me/viewtopic.php?t=25337
gives the solution, but you may have to adapt to whatever pkg there is, currently).
After this, z-way server did boot up as expected, and all z-wave devices worked as expected and could be controlled from the PI.)
However, z-way couldn't do all the stuff I wanted so I moved to jeedom.
Jeedom proved a fuming mess. I can't grab how it works, to be honest. I'll keep reading the doc but I'm not positive I can use a tool I need to read the doc for ... Needs to be straight forward ...
More to come ...