New to Overclock.net
Join Date: Feb 2010
Location: Victoria Australia.
Rep: 16 (Unique: 14)
Case arrived today.. here are some pictures.
Vulcan. Sufficient packaging, not over the top but gets the job done.
Baby on her side
Standing up fresh out of box
Front Drive bays: Note the stock cable management NZXT has done, not to shabby. Also the plastic underneath the bottom HDD bays to prevent the top of any long PCB's shorting from the metal of the case. Good thinking NZXT!
Accessories box.. HDD rails, numerous thumb screws as well as regular.
Bottom view, PSU intake dust filter visible on left.
Rear nekked view, panel off. Good job of cable management by NZXT.
PSU Mounted inside, fits perfectly. Not tight enough to scratch but not going anywhere.
PSU Cable management holes.
Removable HDD Bay. (Necessary for H50's.) Front panel off momentarily to do some fan work.
Fan work completed. Double 120mm top exhaust.
Motherboard in, H50 Rad in.
Everything installed, straight up view. Side panel off. Cable management didn't go as smoothly as I'd hoped, having the HDD's in the top bay made it more difficult. Note to anyone buying this case with an H50: It will work fine! Just make sure you have SATA cables that are long enough so you can run a reverse installation on the hard drives so the power and SATA are hidden. (Facing the other way/front of the case. Will have to pop off front panel.)
More Vulcan goodness. I have another 80mm orange LED exhaust fan I will be putting in but I was in a rush to just get everything going.
Another Side view.
Side view w.panel on.
Angled view to top it off!
Edit why aren't my pictures showing up?
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|