Overclock.net - An Overclocking Community - View Single Post - BrassIIe (Case Mod '09)
View Single Post
post #3 of (permalink) Old 01-16-2009, 09:49 PM - Thread Starter
New to Overclock.net
nafljhy's Avatar
Join Date: Feb 2008
Location: BUR
Posts: 8,996
Rep: 631 (Unique: 409)
This update is a combination of more than 1 update.

Update 1

I received the V350 and was so excited that I forgot to take some pictures but I got the important parts down.

Here is the stock front.

the left side.

the right

here is the JR P45. I've already replaced the TIM on both NB and SB.

here is the micro res turned into a bay res. i cut off the 4 tabs on one side then sanded and polished it to a nice clear look.

here is a fillport that i added on to the "top"

the BP barbs... these normal nickel plated ones will be replaced by brass ones.

a full shot of my new 3.5" bay res.

here is a mock set up of the pump and bay res.

another shot.

* This Worklog post was generated using WorklogCreator - Version:
* Free Download: http://www.mod2software.com/worklogc...logcreator.zip

nafljhy is offline