Gaming and mouse response BIOS optimization guide for modern PC hardware - Page 417 - Overclock.net - An Overclocking Community
Forum Jump: 

Gaming and mouse response BIOS optimization guide for modern PC hardware

Reply
 
Thread Tools
post #4161 of 4177 (permalink) Old 05-11-2020, 04:11 PM
New to Overclock.net
 
Timecard's Avatar
 
Join Date: Dec 2015
Posts: 434
Rep: 32 (Unique: 20)
Both nolazymode and alwayson weren't in that link.
Timecard is offline  
Sponsored Links
Advertisement
 
post #4162 of 4177 (permalink) Old 05-12-2020, 01:40 AM
New to Overclock.net
 
Join Date: Oct 2019
Posts: 2
Rep: 0
Would it be worth it to buy ryzen 4000? or buy an old mobo with good usb 2.0 support and hpet possible to turn off?
sharkzer is offline  
post #4163 of 4177 (permalink) Old 05-12-2020, 03:34 AM - Thread Starter
New to Overclock.net
 
r0ach's Avatar
 
Join Date: Feb 2012
Posts: 2,377
Rep: 176 (Unique: 115)
Quote: Originally Posted by sharkzer View Post
Would it be worth it to buy ryzen 4000? or buy an old mobo with good usb 2.0 support and hpet possible to turn off?
I wouldn't get a Ryzen just because you're forced to use Windows 10 and it's nothing more than a more bloated version of Windows 8.1 with worse mouse movement. The Z77 experiment isn't a very expensive venture. $99 for a motherboard on ebay, $20 for two sticks of DH0-CH9 Samsung ram, and $40 for a 3570k. Worst case scenario you could build one new 7-9000 series intel and one Z77 box and compare them.

I would just avoid using ANY BIOS release that address Spectre or Meltdown. BIOS's I've tried on SEVERAL different motherboards all had mouse movement go to crap when I used them. This will eliminate a large amount of motherboards that you can use. Like...you basically have to buy a used board and hope it hasn't been flashed with a newer, non-reversable firmware. No reason to care about security on a 'gaming' box anyway.

Mouse Input Lag BIOS & Windows Optimization Guide
too many personal messages to reply to
r0ach is offline  
Sponsored Links
Advertisement
 
post #4164 of 4177 (permalink) Old 05-12-2020, 08:35 AM
New to Overclock.net
 
Join Date: Aug 2016
Posts: 93
Rep: 1 (Unique: 1)
Did AMD say they're dropping Windows 7 support for Ryzen 4000? Because right now you can use 8.1 without any problems. Good thing is Ryzen doesn't have Meltdown vulnerability, only Spectre.

With tools like UEFI BIOS Updater (UBU) it's possible to replace CPU microcode with whatever you prefer (for example, old microcode without Meltdown/Spectre patches), so non-reversable firmware shouldn't be a problem, although I think you could reverse to old BIOS by using AMI Flasher utility.

Last edited by Th3Awak3n1ng; 05-13-2020 at 01:45 AM.
Th3Awak3n1ng is offline  
post #4165 of 4177 (permalink) Old 05-14-2020, 10:46 AM
New to Overclock.net
 
Join Date: Dec 2019
Posts: 10
Rep: 0
Hello guys, i have one problem. I hope someone experienced this before and know how to fix it, because I'm suffering from this since 2013.
Too sum up: Super bad hiterg, 35% bullets going nowhere. Actually did a lot of windows tweaks, nothing works. Deagle is unplayable, literally impossible to hit someone, awp no scope too. Once a time i reinstalled os and had better hitreg. I could finally feel taps ant headshots, but sadly i had to reinstall my os because of different problems. after os reinstall csgo became **** again. Also people from popular "cs runs normal only first time" thread had the same problem. If someone know how to fix this i can pay a little bit for it. Waiting for response.
Video of hitreg:
Layed is offline  
post #4166 of 4177 (permalink) Old 05-17-2020, 01:03 AM - Thread Starter
New to Overclock.net
 
r0ach's Avatar
 
Join Date: Feb 2012
Posts: 2,377
Rep: 176 (Unique: 115)
I've never experienced any issue like that so I can't help you. Assuming it's not just plain old network packet loss, do you run anything like hyperthreading turned on and HPET off? Supposedly the reason they force enable HPET in some boards is to facilitate the sync of those extra HT threads. I always turn things like hyperthreading off, so it's not something that would affect me.

Mouse Input Lag BIOS & Windows Optimization Guide
too many personal messages to reply to
r0ach is offline  
post #4167 of 4177 (permalink) Old 05-17-2020, 10:30 AM
vf-
New to Overclock.net
 
vf-'s Avatar
 
Join Date: Feb 2011
Location: UK
Posts: 533
Rep: 5 (Unique: 5)
Quote: Originally Posted by r0ach View Post
I've never experienced any issue like that so I can't help you. Assuming it's not just plain old network packet loss, do you run anything like hyperthreading turned on and HPET off? Supposedly the reason they force enable HPET in some boards is to facilitate the sync of those extra HT threads. I always turn things like hyperthreading off, so it's not something that would affect me.
Then why buy an i7/i9 if you turn it off...
vf- is offline  
post #4168 of 4177 (permalink) Old 05-20-2020, 11:30 AM
New to Overclock.net
 
x7007's Avatar
 
Join Date: Aug 2009
Posts: 1,170
Rep: 12 (Unique: 12)
Any recommendations for USB Splitter? I need one for connecting HDFURY DR.HDMI4K and the mouse/keyboard it seems like some USB ports work better. sometimes I when I turn the TV I don't get a signal and I need to unplug replug the USB DR.HDMI4K and then I get a signal. I can't detect what causing it to expect only some weird thing in the USB. should I need to give more voltage to something on the Motherboard maybe? I have many devices connecting to USB. DR.HDMI4K, Mouse, Keyboard, SXFI AMP Soundcard Type-C. it looks like it doesn't have enough voltage to powered on randomly. because I disabled the USB power suspended. Would I need Active/Powered USB Splitter for all those?

RIGWarning: Spoiler! (Click to show)
CPU :AMD 1950X @ 3.7 Ghz 1.280
MOBO : Gigabyte X399 AORUS Gaming 7 (rev. 1.0)
RAM : G.SKILL Flare X Series 32GBx4 DDR4 3200 (PC4 25600) Model F4-3200C14D-16GFX)
GPU :INNO3D Nvidia GeForce GTX1080 8G D5 1759Mhz iChill X3
Sound Card For 5.1 Speakers : Asus Strix RAID DLX
Network Card : SolareFlare SFN6122F SFP+ 10Gbit Dual Port PCIEx4
PSU : ThermalTake 850Watt ToughPower
STORAGE
SanDisk Extreme PRO SSD 480Gb OS
WD Gold 6TB DataCenter 7200 128MB DATA/GAMEZ
Seagate 5TB Enterprise 7200 128MB (ST5000NM0024) DATA/GAMEZ
Samsung x2 1TB 7200 RAID0 GAMEZ
Segate 3TB Backup+ Desktop USB External BACKUP

GEAR and Sound
Warning: Spoiler! (Click to show)
TV : LG OLED55C6 TV
Mouse : Logitech G502
Mouse Pad : SteelSeries I-2 Black
Keyboard : Corsair Gaming K70 RAPIDFIRE
GamePad : Xbox Elite Controller + Xbox Wireless Adapter
Headphones : Beyerdynamic DT990 600 Ohms
A...


x7007 is offline  
post #4169 of 4177 (permalink) Old 05-22-2020, 07:37 PM
New to Overclock.net
 
x7007's Avatar
 
Join Date: Aug 2009
Posts: 1,170
Rep: 12 (Unique: 12)
Could it be we need more CPU voltage or SB Voltage to fix the mouse input lag? It's like the cpu doesn't have enough Voltage so it changes the speed, limiting it. I upper the voltage a bit more and to conclude that I saw someone else with almost same issue, but he didn't find solution, but he did say he had higher input when using LLC.

https://forums.intel.com/s/question/...language=en_US


Also this

[url]https://www.nvidia.com/en-us/geforce/forums/gaming-rigs/8/305605/random-mouse-sensitivity-changes-input-lag/?topicPage=4[/url

Quote:
: fixed my problem. No mouse lag no key stuck everything works fine

I simply set my Dynamic VCORE SOC(DVID) to +0.300V.
It's clearly something with voltage and not just USB


Another from this thread

Quote:
JusTNaG you fixed my 2 year old mouse input lag with one bios change. Man i would just kiss you for this. This means so much. I've never felt spontaneous and sharp mouse movement since 2017. Heavy mouse input lag is gone. Now i need to fix my instant deaths issue. Like greyboar said, we needed an electric push for our systems cause some of our households are vulnerable to interferences and stuff. So to fix my instant death and enemy jittery movement i may need to increase my SOC voltage more if i am right.

RIGWarning: Spoiler! (Click to show)
CPU :AMD 1950X @ 3.7 Ghz 1.280
MOBO : Gigabyte X399 AORUS Gaming 7 (rev. 1.0)
RAM : G.SKILL Flare X Series 32GBx4 DDR4 3200 (PC4 25600) Model F4-3200C14D-16GFX)
GPU :INNO3D Nvidia GeForce GTX1080 8G D5 1759Mhz iChill X3
Sound Card For 5.1 Speakers : Asus Strix RAID DLX
Network Card : SolareFlare SFN6122F SFP+ 10Gbit Dual Port PCIEx4
PSU : ThermalTake 850Watt ToughPower
STORAGE
SanDisk Extreme PRO SSD 480Gb OS
WD Gold 6TB DataCenter 7200 128MB DATA/GAMEZ
Seagate 5TB Enterprise 7200 128MB (ST5000NM0024) DATA/GAMEZ
Samsung x2 1TB 7200 RAID0 GAMEZ
Segate 3TB Backup+ Desktop USB External BACKUP

GEAR and Sound
Warning: Spoiler! (Click to show)
TV : LG OLED55C6 TV
Mouse : Logitech G502
Mouse Pad : SteelSeries I-2 Black
Keyboard : Corsair Gaming K70 RAPIDFIRE
GamePad : Xbox Elite Controller + Xbox Wireless Adapter
Headphones : Beyerdynamic DT990 600 Ohms
A...



Last edited by x7007; 05-22-2020 at 08:39 PM.
x7007 is offline  
post #4170 of 4177 (permalink) Old 05-22-2020, 10:07 PM
New to Overclock.net
 
Timecard's Avatar
 
Join Date: Dec 2015
Posts: 434
Rep: 32 (Unique: 20)
Intel thread was written by Ayman who wrote the nvidia thread input lag is killing me.

https://www.nvidia.com/en-us/geforce...e/?topicPage=1

JustNag didn't fix his problem, he's in my discord still working with us to solve the problem. Most changes are only temporary, always comes back.

Last edited by Timecard; 05-22-2020 at 10:12 PM.
Timecard is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off