Asus Rampage V Extreme Owners thread - Page 1076 - Overclock.net - An Overclocking Community

Forum Jump: 

Asus Rampage V Extreme Owners thread

Reply
 
Thread Tools
post #10751 of 10775 (permalink) Old 04-06-2019, 10:02 PM
New to Overclock.net
 
dpoverlord's Avatar
 
Join Date: Aug 2010
Posts: 1,920
Rep: 52 (Unique: 34)
Quote: Originally Posted by mattliston View Post
change the bus strap from auto to 100mhz

overclocking seems to set 125mhz strap when left on auto for some reason on some BIOS versions, at least on my board.
Changed Boot Strap to 100

So system wise I have a really well decked out Air cooling beast. My main concern so far is that my voltages may be too high. My ram is DDR-2400 and I in the past was able to get it to 4.45 but I lost all of those settings .

The below settings will post and play games but it will not past prime so I am trying to figure out what to fine tune.

I am not sure if I setup my voltages correctly I made this validation file:
https://valid.x86.fr/kiujih

Are these values dangerous? for 4.3ghz I would love to get more juice.

Core speed in CPU Z / AI in windows says 4398mhz and 4299MHZ

I used the EZ Tuner Wizard to lock in my XMP then did:
AI Overclock Tuner --> Manual
Source Clock TUner --> 60hm Dbl
PLL Selection - LC PLL
Asus MultiCore Enhancement - Disabled

CPU Core Ratio - By Core Usage
1-6 - Core Ratio Limit from 37 --> 44
Min CPU Cache Ratio --> to 16
Max CPU Cache Ratio --> to 42
Internal PLL Overvoltage --> Enabled
BLCK Frequency --> 100:133 ( Considering my ram is not high speed should I change this to 100:100)?
Dram Frequency --> DDR 2400
Xtreme Tweaking --> Enabled

Fully Manual Mode --> Disabled
CPU Core Voltage --> Offset Mode
CPU Core Voltage OFFSET --> .175 (I am thrown off by this since my voltage reads as 1.216V... Isnt that too high theb?)

Cpu Cache Voltage OFFSET MODE
CPU Cache Voltage Offset --> .3v (Reads as 1.243V)
Disabled
CPU SVID SUPPORT --> Disabled
CPU INput Voltage --> 1.910 Cant change this its set to AUto / 1.920V



DRAM SVID Support --> Disabled
CPU Spread Spectrum --> Disabled (SHould I keep this on Auto?)
Rampage Tweak --> Mode 2 (Should I set this to Auto?)

CPU External Digi Power Control SEttings
CPU Load Line Calibration --> Level 9
CPU Power Phase --> Extreme
CPU Current Capability --> 140%
Attached Images
 

Last edited by dpoverlord; 04-06-2019 at 10:49 PM.
dpoverlord is offline  
Sponsored Links
Advertisement
 
post #10752 of 10775 (permalink) Old 04-08-2019, 12:23 PM
New to Overclock.net
 
PipJones's Avatar
 
Join Date: Apr 2015
Posts: 298
Rep: 7 (Unique: 7)
CPU Voltage seems a little high for air, but, not too scary providing it is good.

Stability test required with constant monitoring of temps. I use SIV to monitor temps.

I will send you a link to my BIOS settings pre-5960X.



Quote: Originally Posted by dpoverlord View Post
Changed Boot Strap to 100

So system wise I have a really well decked out Air cooling beast. My main concern so far is that my voltages may be too high. My ram is DDR-2400 and I in the past was able to get it to 4.45 but I lost all of those settings .

The below settings will post and play games but it will not past prime so I am trying to figure out what to fine tune.

I am not sure if I setup my voltages correctly I made this validation file:
https://valid.x86.fr/kiujih

Are these values dangerous? for 4.3ghz I would love to get more juice.

Core speed in CPU Z / AI in windows says 4398mhz and 4299MHZ

I used the EZ Tuner Wizard to lock in my XMP then did:
AI Overclock Tuner --> Manual
Source Clock TUner --> 60hm Dbl
PLL Selection - LC PLL
Asus MultiCore Enhancement - Disabled

CPU Core Ratio - By Core Usage
1-6 - Core Ratio Limit from 37 --> 44
Min CPU Cache Ratio --> to 16
Max CPU Cache Ratio --> to 42
Internal PLL Overvoltage --> Enabled
BLCK Frequency --> 100:133 ( Considering my ram is not high speed should I change this to 100:100)?
Dram Frequency --> DDR 2400
Xtreme Tweaking --> Enabled

Fully Manual Mode --> Disabled
CPU Core Voltage --> Offset Mode
CPU Core Voltage OFFSET --> .175 (I am thrown off by this since my voltage reads as 1.216V... Isnt that too high theb?)

Cpu Cache Voltage OFFSET MODE
CPU Cache Voltage Offset --> .3v (Reads as 1.243V)
Disabled
CPU SVID SUPPORT --> Disabled
CPU INput Voltage --> 1.910 Cant change this its set to AUto / 1.920V



DRAM SVID Support --> Disabled
CPU Spread Spectrum --> Disabled (SHould I keep this on Auto?)
Rampage Tweak --> Mode 2 (Should I set this to Auto?)

CPU External Digi Power Control SEttings
CPU Load Line Calibration --> Level 9
CPU Power Phase --> Extreme
CPU Current Capability --> 140%

Triggers Brush
(24 items)
Pheonix
(16 items)
HTPC (4K)
(11 items)
CPU
Intel® Core™ i7-5960X
Motherboard
Asus Rampage V Extreme
GPU
nVidia GTX 1080ti FE with EK front & back
RAM
Corsair Vengeance LPX DDR4 3200MHz RAM/Memory Kit (16GB: 4x4GB)
Hard Drive
Samsung 256GB 950 PRO Series M.2 NVME PCIE SSD
Hard Drive
Samsung MZ-76E500B/EU 500 GB 860 EVO Sata III 64L V NAND Solid State Drive
Hard Drive
4x HGST HTS721010A9E630 1TB 2.5" 7K1000 SATA 3 7200rpm (RAID 10)
Hard Drive
Corsair Force Series™ GT 120GB SATA 3 6Gb/s Solid-State Hard Drive (RAID 10 SSD Cache)
Optical Drive
LG GGC-H20L
Power Supply
Corsair AX1200i Digital ATX Power Supply — 1200 Watt 80 PLUS® PLATINUM Certified Fully-Modular PSU
Cooling
EK-XRES 140 Revo D5 PWM
Cooling
EK-CoolStream SE 360
Cooling
EK-CoolStream SE 420 (Slim Triple)
Cooling
EK-Supremacy EVO - Full Nickel (Original CSQ)
Cooling
EK-FC1080 GTX Ti - Nickel
Cooling
EK-FC Titan X Pascal Backplate - Black
Case
Corsair Obsidian Series® 900D Super Tower Case
Operating System
Windows 10 64 Professional
Monitor
Iiyama G-Master GB2888UHSU
Monitor
Sony Bravia KD-49X8005C
Keyboard
Corsair Raptor K30 Gaming Keyboard
Mouse
Corsair M65 PRO RGB FPS Gaming Mouse — Black
Other
Corsair Link Commander Mini
Other
Corsair Commander Pro
CPU
Intel® Xeon® Processor E5-1650 v2 @ 100x45
Motherboard
Asus Sabertooth X79
GPU
Asus ROG Strix GeForce® GTX 1060
RAM
Corsair Dominator® Platinum DDR3 2133MHz C9 Memory Kit (16GB: 4x4GB)
Hard Drive
HyperX Predator PCIe Gen2 x4 HHHL (Half Height Half Length) Internal SSD Drive - 240 GB
Hard Drive
4x HGST Deskstar P7K500 HDP725050GLA360
Hard Drive
HGST HTS725050A7E630 (465 GB) with 120Gb SSD Cache
Power Supply
Corsair RMi Series™ RM750i — 750 Watt 80 PLUS® Gold Certified Fully Modular PSU
Cooling
Corsair Hydro Series™ H100i GTX Extreme Performance Liquid CPU Cooler
Case
Corsair Obsidian Series™ 800D Full-Tower Case
Operating System
Windows 10 x64 Professional
Keyboard
Sony PS3 Keyboard
Keyboard
Corsair Gaming Lapboard
Keyboard
Corsair K63 Compact Mechanical Gaming Keyboard — CHERRY® MX Red
Mouse
Corsair Katar Optical Gaming Mouse
Other
Corsair Commander Mini
CPU
Intel® Xeon® Processor E5-2660 v2
Motherboard
Asus P9X79LE
GPU
Asus ROG Strix GeForce® GTX 1050 Ti OC edition 4GB GDDR5
RAM
Hynix DDR3 PC3-14900 1866MHz (HMT451U7AFR8C) (16GB: 4x4GB ECC)
Hard Drive
Corsair Force Series™ 3 60GB SATA 3 6Gb/s
Power Supply
Corsair RMi Series™ RM650i - 650 Watt 80 PLUS® Gold Certified Fully Modular PSU
Cooling
Noctua NH-D15
Case
Streacom F12C
Operating System
Windows 10 64
Other
Streacom FLIRC
Other
Corsair Commander Mini
▲ hide details ▲
PipJones is offline  
post #10753 of 10775 (permalink) Old 04-08-2019, 06:20 PM
New to Overclock.net
 
dpoverlord's Avatar
 
Join Date: Aug 2010
Posts: 1,920
Rep: 52 (Unique: 34)
Quote: Originally Posted by PipJones View Post
CPU Voltage seems a little high for air, but, not too scary providing it is good.

Stability test required with constant monitoring of temps. I use SIV to monitor temps.

I will send you a link to my BIOS settings pre-5960X.
That would be amazing I was trying to use your past messages as a guide. Were you on water or air before? I figure if the EZ tuner hits 4ghz no problem 4.3 / 4.4 should be doable on my system. Currently at 4.3 prime 95 will hit 80's which I dont want to have it under. Gaming in apex was in the 50's.

I figure 4k on a 2080ti I should be able to max out at this point. So if I am not maybe its a CPU bottle neck. Def want to get a stable good O/C before I figure out other ideas.
dpoverlord is offline  
Sponsored Links
Advertisement
 
post #10754 of 10775 (permalink) Old 04-09-2019, 12:09 AM
New to Overclock.net
 
PipJones's Avatar
 
Join Date: Apr 2015
Posts: 298
Rep: 7 (Unique: 7)
I am on water.

My 5930K was hitting 4400 with around 1.28v, cache was 4200 with not much difference in voltage.

If the machine is stable, do some game testing and see if you're happy with the results. An extra 100/200 Mhz on the CPU will not make that much difference (my opinion, based on benchmarking my current system).

Quote: Originally Posted by dpoverlord View Post
That would be amazing I was trying to use your past messages as a guide. Were you on water or air before? I figure if the EZ tuner hits 4ghz no problem 4.3 / 4.4 should be doable on my system. Currently at 4.3 prime 95 will hit 80's which I dont want to have it under. Gaming in apex was in the 50's.

I figure 4k on a 2080ti I should be able to max out at this point. So if I am not maybe its a CPU bottle neck. Def want to get a stable good O/C before I figure out other ideas.

Triggers Brush
(24 items)
Pheonix
(16 items)
HTPC (4K)
(11 items)
CPU
Intel® Core™ i7-5960X
Motherboard
Asus Rampage V Extreme
GPU
nVidia GTX 1080ti FE with EK front & back
RAM
Corsair Vengeance LPX DDR4 3200MHz RAM/Memory Kit (16GB: 4x4GB)
Hard Drive
Samsung 256GB 950 PRO Series M.2 NVME PCIE SSD
Hard Drive
Samsung MZ-76E500B/EU 500 GB 860 EVO Sata III 64L V NAND Solid State Drive
Hard Drive
4x HGST HTS721010A9E630 1TB 2.5" 7K1000 SATA 3 7200rpm (RAID 10)
Hard Drive
Corsair Force Series™ GT 120GB SATA 3 6Gb/s Solid-State Hard Drive (RAID 10 SSD Cache)
Optical Drive
LG GGC-H20L
Power Supply
Corsair AX1200i Digital ATX Power Supply — 1200 Watt 80 PLUS® PLATINUM Certified Fully-Modular PSU
Cooling
EK-XRES 140 Revo D5 PWM
Cooling
EK-CoolStream SE 360
Cooling
EK-CoolStream SE 420 (Slim Triple)
Cooling
EK-Supremacy EVO - Full Nickel (Original CSQ)
Cooling
EK-FC1080 GTX Ti - Nickel
Cooling
EK-FC Titan X Pascal Backplate - Black
Case
Corsair Obsidian Series® 900D Super Tower Case
Operating System
Windows 10 64 Professional
Monitor
Iiyama G-Master GB2888UHSU
Monitor
Sony Bravia KD-49X8005C
Keyboard
Corsair Raptor K30 Gaming Keyboard
Mouse
Corsair M65 PRO RGB FPS Gaming Mouse — Black
Other
Corsair Link Commander Mini
Other
Corsair Commander Pro
CPU
Intel® Xeon® Processor E5-1650 v2 @ 100x45
Motherboard
Asus Sabertooth X79
GPU
Asus ROG Strix GeForce® GTX 1060
RAM
Corsair Dominator® Platinum DDR3 2133MHz C9 Memory Kit (16GB: 4x4GB)
Hard Drive
HyperX Predator PCIe Gen2 x4 HHHL (Half Height Half Length) Internal SSD Drive - 240 GB
Hard Drive
4x HGST Deskstar P7K500 HDP725050GLA360
Hard Drive
HGST HTS725050A7E630 (465 GB) with 120Gb SSD Cache
Power Supply
Corsair RMi Series™ RM750i — 750 Watt 80 PLUS® Gold Certified Fully Modular PSU
Cooling
Corsair Hydro Series™ H100i GTX Extreme Performance Liquid CPU Cooler
Case
Corsair Obsidian Series™ 800D Full-Tower Case
Operating System
Windows 10 x64 Professional
Keyboard
Sony PS3 Keyboard
Keyboard
Corsair Gaming Lapboard
Keyboard
Corsair K63 Compact Mechanical Gaming Keyboard — CHERRY® MX Red
Mouse
Corsair Katar Optical Gaming Mouse
Other
Corsair Commander Mini
CPU
Intel® Xeon® Processor E5-2660 v2
Motherboard
Asus P9X79LE
GPU
Asus ROG Strix GeForce® GTX 1050 Ti OC edition 4GB GDDR5
RAM
Hynix DDR3 PC3-14900 1866MHz (HMT451U7AFR8C) (16GB: 4x4GB ECC)
Hard Drive
Corsair Force Series™ 3 60GB SATA 3 6Gb/s
Power Supply
Corsair RMi Series™ RM650i - 650 Watt 80 PLUS® Gold Certified Fully Modular PSU
Cooling
Noctua NH-D15
Case
Streacom F12C
Operating System
Windows 10 64
Other
Streacom FLIRC
Other
Corsair Commander Mini
▲ hide details ▲
PipJones is offline  
post #10755 of 10775 (permalink) Old 05-01-2019, 06:52 AM
New to Overclock.net
 
tlblight's Avatar
 
Join Date: Sep 2017
Posts: 11
Rep: 0
Hi guys, I have a 5960x that hits 4.6 @1.29 ...its a J batch so not surprising there. Also, mobo is a rampage v extreme edition 10, with the special edition mono block. I have some 3733 Team group extreme ram. And that's what I needed help with , could someone help me out with some VLL timings for my ram? I don't care if I run at 3733 or, even 3200 kr even lower I just want it to have very low latency. Thank you guys.
tlblight is offline  
post #10756 of 10775 (permalink) Old 05-01-2019, 07:54 AM
Overclocker in training
 
ThrashZone's Avatar
 
Join Date: Apr 2017
Posts: 7,757
Rep: 76 (Unique: 57)
Hi,
@dpoverlord

That's a crazy high vid voltage for 4.3 bud 1.3v for 4.5 is pretty normal for 5930k's

Here's my everyday 4.2 @ 1.226v way lower than your 4.3 @ 1.349v
https://valid.x86.fr/5ir250

CPU
i9-9940x With Heatkiller IV Pro and VRM Plexi-Copper water block
Motherboard
ASUS x299 Rampage VI Apex
GPU
Titan Xp with copper Water Block
RAM
Trident Z 3600C16 4x8gb's b-die default timings 16-16-16-36
Hard Drive
Samsung 970 Evo Plus 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Optical Drive
LG Blu-Ray WH16NS40
Power Supply
evga 1200-P2
Cooling
2-280GTX Black Ice Nemesis rads with D5 pump-res combo and D5 top before and after rads.
Case
corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 pro & 10 pro Win-7 Primary os.
Monitor
ASUS VG248QE 24" 144Hz
Keyboard
Logitech G910 Orion spectrum
Mouse
Redragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
CPU
i7-5930k with Heatkiller IV Pro Plexi-Copper and koolance vrm water blocks
Motherboard
X99 Sabertooth
GPU
EVGA 1080ti FTW3 with Water block
RAM
Trident-Z 3200C14 4x8gb's b-die default timings 14-14-14-34
Hard Drive
Samsung 970 Evo 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Power Supply
EVGA 1000-P2
Cooling
2-240 GTX Black Ice Nemesis rads/ D5 pump-res combo and D5 top before and after rads.
Case
Corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 and 10 pro Win-7 Primary os.
Monitor
AOC G2460PG 24"G-Sync 144Hz
Mouse
Red Dragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
Hard Drive
eLeaf MELO-3 4ml
Power Supply
SE US18650VTC6 3120mAh 30A 3.6V 18650 Li-ion Battery - GREENx4
Case
ANGIS Legion MOD 200w Geek Vape
Operating System
VapeWild RazzleBerry 50-50-0mg nic
▲ hide details ▲
ThrashZone is offline  
post #10757 of 10775 (permalink) Old 06-30-2019, 05:35 AM
New to Overclock.net
 
Join Date: Apr 2018
Posts: 23
Rep: 0
I know this is an old post but:



Well that's me screwed over then, I have an Rampage V Edition 10 running an Aorus GTX1080 Ti Extreme, an Samsung 960 EVO 1G, A Avago 9361-8i Raid controller and an Mellenox Connect X 2 10Gb SFP and the lack of bifurcation explains a lot.


The VGA Card is in PCIeX16_1, PCIeX16_2 is blocked by the VGA ( large heatsync ), PCIeX16_3 contains the Raid controller and PCIeX16_4 the 10G SFP. The problem is the video card runs at X8 when it should run at x16, the only way to fix this is to go into bios and select 4 Way configuration and change it from Auto to X16,x8,x8,x8 - when you do this it disables the M.2 slot but the VGA card runs x16, I also tried disabling PCIeX16_2 using in the on board switch but it is so dumb that it still continues with the lanes in the same config with the M.2 disabled, honestly how difficult can it be to look at each slot, see what is in it and only if it exceeds the number of lanes on my 40 lane CPU drop something to x8 or alternately give me the ability to manually control which slots get how many lanes. Pathetic. I don't have that problem with my X399 board running threadripper. All manufacturers need to give us power users closer to bare metal control over these things we didn't buy boards this expensive because we need our hands to be held.
Chasse is offline  
post #10758 of 10775 (permalink) Old 07-04-2019, 03:30 PM
Overclocker in training
 
ThrashZone's Avatar
 
Join Date: Apr 2017
Posts: 7,757
Rep: 76 (Unique: 57)
Hi,
Oops wrong thread

CPU
i9-9940x With Heatkiller IV Pro and VRM Plexi-Copper water block
Motherboard
ASUS x299 Rampage VI Apex
GPU
Titan Xp with copper Water Block
RAM
Trident Z 3600C16 4x8gb's b-die default timings 16-16-16-36
Hard Drive
Samsung 970 Evo Plus 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Optical Drive
LG Blu-Ray WH16NS40
Power Supply
evga 1200-P2
Cooling
2-280GTX Black Ice Nemesis rads with D5 pump-res combo and D5 top before and after rads.
Case
corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 pro & 10 pro Win-7 Primary os.
Monitor
ASUS VG248QE 24" 144Hz
Keyboard
Logitech G910 Orion spectrum
Mouse
Redragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
CPU
i7-5930k with Heatkiller IV Pro Plexi-Copper and koolance vrm water blocks
Motherboard
X99 Sabertooth
GPU
EVGA 1080ti FTW3 with Water block
RAM
Trident-Z 3200C14 4x8gb's b-die default timings 14-14-14-34
Hard Drive
Samsung 970 Evo 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Power Supply
EVGA 1000-P2
Cooling
2-240 GTX Black Ice Nemesis rads/ D5 pump-res combo and D5 top before and after rads.
Case
Corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 and 10 pro Win-7 Primary os.
Monitor
AOC G2460PG 24"G-Sync 144Hz
Mouse
Red Dragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
Hard Drive
eLeaf MELO-3 4ml
Power Supply
SE US18650VTC6 3120mAh 30A 3.6V 18650 Li-ion Battery - GREENx4
Case
ANGIS Legion MOD 200w Geek Vape
Operating System
VapeWild RazzleBerry 50-50-0mg nic
▲ hide details ▲

Last edited by ThrashZone; 07-04-2019 at 03:33 PM.
ThrashZone is offline  
post #10759 of 10775 (permalink) Old 07-18-2019, 03:57 AM
New to Overclock.net
 
PipJones's Avatar
 
Join Date: Apr 2015
Posts: 298
Rep: 7 (Unique: 7)
New 4101 BIOS for Rampage V Extreme

There's a new BIOS out for our RVE's

https://www.asus.com/us/Motherboards...011.1459341389

"RAMPAGE-V-EXTREME Beta BIOS 4101
Updated uCode for Intel security issue."
Attached Thumbnails
Click image for larger version

Name:	BIOS.PNG
Views:	3
Size:	8.9 KB
ID:	281330  


Triggers Brush
(24 items)
Pheonix
(16 items)
HTPC (4K)
(11 items)
CPU
Intel® Core™ i7-5960X
Motherboard
Asus Rampage V Extreme
GPU
nVidia GTX 1080ti FE with EK front & back
RAM
Corsair Vengeance LPX DDR4 3200MHz RAM/Memory Kit (16GB: 4x4GB)
Hard Drive
Samsung 256GB 950 PRO Series M.2 NVME PCIE SSD
Hard Drive
Samsung MZ-76E500B/EU 500 GB 860 EVO Sata III 64L V NAND Solid State Drive
Hard Drive
4x HGST HTS721010A9E630 1TB 2.5" 7K1000 SATA 3 7200rpm (RAID 10)
Hard Drive
Corsair Force Series™ GT 120GB SATA 3 6Gb/s Solid-State Hard Drive (RAID 10 SSD Cache)
Optical Drive
LG GGC-H20L
Power Supply
Corsair AX1200i Digital ATX Power Supply — 1200 Watt 80 PLUS® PLATINUM Certified Fully-Modular PSU
Cooling
EK-XRES 140 Revo D5 PWM
Cooling
EK-CoolStream SE 360
Cooling
EK-CoolStream SE 420 (Slim Triple)
Cooling
EK-Supremacy EVO - Full Nickel (Original CSQ)
Cooling
EK-FC1080 GTX Ti - Nickel
Cooling
EK-FC Titan X Pascal Backplate - Black
Case
Corsair Obsidian Series® 900D Super Tower Case
Operating System
Windows 10 64 Professional
Monitor
Iiyama G-Master GB2888UHSU
Monitor
Sony Bravia KD-49X8005C
Keyboard
Corsair Raptor K30 Gaming Keyboard
Mouse
Corsair M65 PRO RGB FPS Gaming Mouse — Black
Other
Corsair Link Commander Mini
Other
Corsair Commander Pro
CPU
Intel® Xeon® Processor E5-1650 v2 @ 100x45
Motherboard
Asus Sabertooth X79
GPU
Asus ROG Strix GeForce® GTX 1060
RAM
Corsair Dominator® Platinum DDR3 2133MHz C9 Memory Kit (16GB: 4x4GB)
Hard Drive
HyperX Predator PCIe Gen2 x4 HHHL (Half Height Half Length) Internal SSD Drive - 240 GB
Hard Drive
4x HGST Deskstar P7K500 HDP725050GLA360
Hard Drive
HGST HTS725050A7E630 (465 GB) with 120Gb SSD Cache
Power Supply
Corsair RMi Series™ RM750i — 750 Watt 80 PLUS® Gold Certified Fully Modular PSU
Cooling
Corsair Hydro Series™ H100i GTX Extreme Performance Liquid CPU Cooler
Case
Corsair Obsidian Series™ 800D Full-Tower Case
Operating System
Windows 10 x64 Professional
Keyboard
Sony PS3 Keyboard
Keyboard
Corsair Gaming Lapboard
Keyboard
Corsair K63 Compact Mechanical Gaming Keyboard — CHERRY® MX Red
Mouse
Corsair Katar Optical Gaming Mouse
Other
Corsair Commander Mini
CPU
Intel® Xeon® Processor E5-2660 v2
Motherboard
Asus P9X79LE
GPU
Asus ROG Strix GeForce® GTX 1050 Ti OC edition 4GB GDDR5
RAM
Hynix DDR3 PC3-14900 1866MHz (HMT451U7AFR8C) (16GB: 4x4GB ECC)
Hard Drive
Corsair Force Series™ 3 60GB SATA 3 6Gb/s
Power Supply
Corsair RMi Series™ RM650i - 650 Watt 80 PLUS® Gold Certified Fully Modular PSU
Cooling
Noctua NH-D15
Case
Streacom F12C
Operating System
Windows 10 64
Other
Streacom FLIRC
Other
Corsair Commander Mini
▲ hide details ▲
PipJones is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off