Asus Rampage V Extreme Owners thread - Page 1078 - Overclock.net - An Overclocking Community
Forum Jump: 

Asus Rampage V Extreme Owners thread

Reply
 
Thread Tools
post #10771 of 10781 (permalink) Old 10-18-2019, 08:48 PM
New to Overclock.net
 
Baasha's Avatar
 
Join Date: Jan 2011
Location: USA
Posts: 3,060
Rep: 127 (Unique: 95)
Just installed the latest BIOS but struggling with the 4.30Ghz OC for my 6950X.

I stress tested and it seems fine but temps are way too high. What LLC setting should it be on? I have it on Auto now.

Do we need to manually set the Agent Voltage etc.? I only set V-Core and DRAM voltage manually but pretty much everything else is on Auto. Would appreciate some help.
Baasha is offline  
Sponsored Links
Advertisement
 
post #10772 of 10781 (permalink) Old 10-19-2019, 06:58 AM
Overclocker in training
 
ThrashZone's Avatar
 
Join Date: Apr 2017
Location: Texas
Posts: 10,561
Rep: 151 (Unique: 93)
Quote: Originally Posted by Baasha View Post
Just installed the latest BIOS but struggling with the 4.30Ghz OC for my 6950X.

I stress tested and it seems fine but temps are way too high. What LLC setting should it be on? I have it on Auto now.

Do we need to manually set the Agent Voltage etc.? I only set V-Core and DRAM voltage manually but pretty much everything else is on Auto. Would appreciate some help.
Hi,
Yes !

LLC I've never seen any real advantage to going past LLC-4 or 5

I'll just throw this good advice down by xkm1948 I saved a while back

Quote:
1. Dont run auto voltage on vcore, VCCIO, VCCSA, Vcache and VDRAM
2. Don't use XMP. Always set everything manually
3. Vcore wont hurt much. It is usually cache overclocking that kills your chip.
Keep your cache as close to 1V as possible
4. VCCSA is the same thing. Keep it as close to 1V as possible.
5. Provide adequate cooling for the VRM if you are using AIO.
vccsa 1.1
cache 1.0
vccio 1.05

CPU
i9-9940x With Optimus Foundation copper-plexi and Heatkiller VRM copper-plexi water block
Motherboard
ASUS x299 Rampage VI Apex
GPU
Titan Xp with copper-plexi Water Block
RAM
Trident Z 3600C16 4x8gb's b-die default timings 16-16-16-36
Hard Drive
Samsung 970 Evo Plus 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Optical Drive
LG Blu-Ray WH16NS40
Power Supply
evga 1200-P2
Cooling
D5 pump reservoir combo/ GTX280/ VRM block/ GTX280/ D5 top/ CPU block/ GPU block/ Mora 360/ repeat.
Cooling
MO-RA3 360 PRO stainless steel (25022)
Case
corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 pro & 10 pro Win-7 Primary os.
Monitor
ASUS VG248QE 24" 144Hz
Keyboard
Logitech G910 Orion spectrum
Mouse
Redragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
Other
5.0/https://valid.x86.fr/ez2ifr
CPU
i7-5930k with Heatkiller IV Pro Plexi-Copper and koolance vrm water blocks
Motherboard
X99 Sabertooth
GPU
EVGA 1080ti FTW3 with Water block
RAM
Trident-Z 3200C14 4x8gb's b-die default timings 14-14-14-34
Hard Drive
Samsung 970 Evo 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Power Supply
EVGA 1000-P2
Cooling
2-240 GTX Black Ice Nemesis rads/ D5 pump-res combo and D5 top before and after rads.
Case
Corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 and 10 pro Win-7 Primary os.
Monitor
AOC G2460PG 24"G-Sync 144Hz
Mouse
Red Dragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
Hard Drive
eLeaf MELO-3 4ml
Power Supply
SE US18650VTC6 3120mAh 30A 3.6V 18650 Li-ion Battery - GREENx4
Case
ANGIS Legion MOD 200w Geek Vape
Operating System
VapeWild RazzleBerry 50-50-0mg nic
▲ hide details ▲
ThrashZone is offline  
post #10773 of 10781 (permalink) Old 10-20-2019, 07:13 AM
Zostacular
 
zoson's Avatar
 
Join Date: Jul 2011
Location: NYC
Posts: 655
Rep: 102 (Unique: 85)
Quote: Originally Posted by Baasha View Post
Just installed the latest BIOS but struggling with the 4.30Ghz OC for my 6950X.

I stress tested and it seems fine but temps are way too high. What LLC setting should it be on? I have it on Auto now.

Do we need to manually set the Agent Voltage etc.? I only set V-Core and DRAM voltage manually but pretty much everything else is on Auto. Would appreciate some help.
Quote: Originally Posted by ThrashZone View Post
Hi,
Yes !

LLC I've never seen any real advantage to going past LLC-4 or 5

I'll just throw this good advice down by xkm1948 I saved a while back
I have seen significant benefits to LLC7 and LLC8 depending on the CPU.

That said, just like anything else in overclocking, it's highly CPU dependent - some will need more, some will need less and the only way to know is to test your specific CPU.

Zostacular 2.0
(23 items)
CPU
i7 6950x
Motherboard
ASUS Rampage V Extreme
GPU
NVIDIA RTX 2080 FE
GPU
NVIDIA RTX 2080 FE
RAM
G.Skill Ripjaws V DDR4 3000MHz
Hard Drive
Samsung 960 EVO
Hard Drive
HGST NAS 8TB
Optical Drive
Pioneer BDR 203
Power Supply
Corsair RM1000
Cooling
EK Velocity D-RGB
Cooling
MCP35x2
Cooling
6x Gentle Typhoon AP-00
Cooling
OCCOOL 240 Crossflow
Cooling
Nemesis 120
Case
Cubitek Magic Cube AIO
Operating System
Windows 10 Professional
Monitor
ASUS ROG Swift PG278Q
Monitor
QNIX 2710
Keyboard
Das Keyboard Professional
Mouse
Razer Mamba 2012
Mouse
Razer Goliathus
Audio
Swans M10
Audio
V-MODA Crossfade M100
CPU
i7 990x @ 4665MHz
Motherboard
ASUS Rampage III Extreme
GPU
MSI N770 2GD5/OC
GPU
MSI N770 2GD5/OC
RAM
Mushkin Redline Ridgeback 992057 6x4GB 1600MHz 7-7-7-24-100-1T
Hard Drive
1TB Samsung 840 EVO
Hard Drive
Western Digital Red 3TB
Optical Drive
Pioneer 8x BD-RW 24x DVD+-R
Optical Drive
ASUS DVD+-RW 24x/12x/48x
Power Supply
Corsair TX950
Cooling
HardwareLabs Black Ice GTX 120
Cooling
HardwareLabs Black Ice GTX 120
Cooling
HardwareLabs Black Ice GT Stealth 120
Cooling
7x Scythe Gentle Typhoon AP-00
Cooling
Enermax Magma UC-MA12
Case
Lian-Li PC-A10B
Operating System
Windows 7 Ultimate x64
Monitor
2x Dell SP2309W 23" 2048x1152
Keyboard
Das Keyboard Model S
Mouse
Logitech MX Revolution Bluetooth and Razer Deathadder 3500
Mouse
Razer Goliathus Standard
Audio
Swans M10
Other
Netgear WNDR3700
▲ hide details ▲
zoson is offline  
Sponsored Links
Advertisement
 
post #10774 of 10781 (permalink) Old 10-25-2019, 05:15 AM
New to Overclock.net
 
Vlada011's Avatar
 
Join Date: May 2012
Location: Belgrade, Serbia
Posts: 1,980
Rep: 39 (Unique: 29)
4.2GHz is ideal frequency for i7-6950X.
That's not 6 or 8 cores. I remind you, single threaded performance of i7-6950X on 4.2GHz are equal to i7-5820K on 4.5GHz.
X99 can't compete with newer AMD systems with more cores but still is great platform.
I plan to stay on X99 until DDR5.
Vlada011 is offline  
post #10775 of 10781 (permalink) Old 11-03-2019, 03:21 PM
New to Overclock.net
 
poulk's Avatar
 
Join Date: Sep 2013
Location: Ukraine
Posts: 44
Rep: 0
Hi all!
I got a new memory 4x8GB Corsair 3200 c16 (aida says it single side hynix).
On my system, with 5820k and R5E I can't push this memory to 3000 MHz(it's bootup, but crash in windows) on 3200 it even not boot up.
I try many bios settings but nothing helps.
So now I'm thinking did it wort trying at least to get 3000?
I know x99 is not the best platform for memory overclocking.
But this looks bad even for x99.
Maybe someone have advice "how-to"?
poulk is offline  
post #10776 of 10781 (permalink) Old 01-21-2020, 06:19 PM
New to Overclock.net
 
maxxx.ph's Avatar
 
Join Date: Apr 2011
Posts: 37
Rep: 1 (Unique: 1)
All, does running na NVME on this board have any known issues? I was handed down this motherboard with a CPU and plan in using it to replace my R4BE.
Thanks!

maxxx.ph is offline  
post #10777 of 10781 (permalink) Old 01-22-2020, 12:10 PM
Zostacular
 
zoson's Avatar
 
Join Date: Jul 2011
Location: NYC
Posts: 655
Rep: 102 (Unique: 85)
Quote: Originally Posted by poulk View Post
Hi all!
I got a new memory 4x8GB Corsair 3200 c16 (aida says it single side hynix).
On my system, with 5820k and R5E I can't push this memory to 3000 MHz(it's bootup, but crash in windows) on 3200 it even not boot up.
I try many bios settings but nothing helps.
So now I'm thinking did it wort trying at least to get 3000?
I know x99 is not the best platform for memory overclocking.
But this looks bad even for x99.
Maybe someone have advice "how-to"?
System agent voltage needs to be precisely tuned to get 3000mhz. 3200mhz is not realistic on 5000 series cpus, only 6000 series.
2T Command Rate also helps a lot.
VCCIO CPU increased sometimes help memory overclocking. Don't go above 1.1v. Most CPUs only need about 1.075v to do 3000mhz.

Quote: Originally Posted by maxxx.ph View Post
All, does running na NVME on this board have any known issues? I was handed down this motherboard with a CPU and plan in using it to replace my R4BE.
Thanks!
I run 960 evo on two rve and never had any problems.

Zostacular 2.0
(23 items)
CPU
i7 6950x
Motherboard
ASUS Rampage V Extreme
GPU
NVIDIA RTX 2080 FE
GPU
NVIDIA RTX 2080 FE
RAM
G.Skill Ripjaws V DDR4 3000MHz
Hard Drive
Samsung 960 EVO
Hard Drive
HGST NAS 8TB
Optical Drive
Pioneer BDR 203
Power Supply
Corsair RM1000
Cooling
EK Velocity D-RGB
Cooling
MCP35x2
Cooling
6x Gentle Typhoon AP-00
Cooling
OCCOOL 240 Crossflow
Cooling
Nemesis 120
Case
Cubitek Magic Cube AIO
Operating System
Windows 10 Professional
Monitor
ASUS ROG Swift PG278Q
Monitor
QNIX 2710
Keyboard
Das Keyboard Professional
Mouse
Razer Mamba 2012
Mouse
Razer Goliathus
Audio
Swans M10
Audio
V-MODA Crossfade M100
CPU
i7 990x @ 4665MHz
Motherboard
ASUS Rampage III Extreme
GPU
MSI N770 2GD5/OC
GPU
MSI N770 2GD5/OC
RAM
Mushkin Redline Ridgeback 992057 6x4GB 1600MHz 7-7-7-24-100-1T
Hard Drive
1TB Samsung 840 EVO
Hard Drive
Western Digital Red 3TB
Optical Drive
Pioneer 8x BD-RW 24x DVD+-R
Optical Drive
ASUS DVD+-RW 24x/12x/48x
Power Supply
Corsair TX950
Cooling
HardwareLabs Black Ice GTX 120
Cooling
HardwareLabs Black Ice GTX 120
Cooling
HardwareLabs Black Ice GT Stealth 120
Cooling
7x Scythe Gentle Typhoon AP-00
Cooling
Enermax Magma UC-MA12
Case
Lian-Li PC-A10B
Operating System
Windows 7 Ultimate x64
Monitor
2x Dell SP2309W 23" 2048x1152
Keyboard
Das Keyboard Model S
Mouse
Logitech MX Revolution Bluetooth and Razer Deathadder 3500
Mouse
Razer Goliathus Standard
Audio
Swans M10
Other
Netgear WNDR3700
▲ hide details ▲
zoson is offline  
post #10778 of 10781 (permalink) Old 01-22-2020, 12:14 PM
Overclocker in training
 
ThrashZone's Avatar
 
Join Date: Apr 2017
Location: Texas
Posts: 10,561
Rep: 151 (Unique: 93)
Quote: Originally Posted by poulk View Post
Hi all!
I got a new memory 4x8GB Corsair 3200 c16 (aida says it single side hynix).
On my system, with 5820k and R5E I can't push this memory to 3000 MHz(it's bootup, but crash in windows) on 3200 it even not boot up.
I try many bios settings but nothing helps.
So now I'm thinking did it wort trying at least to get 3000?
I know x99 is not the best platform for memory overclocking.
But this looks bad even for x99.
Maybe someone have advice "how-to"?
Hi,
Real issue is hynix 3200C16 not that x99 can't do 3200
I can't even post with 3200C16 kit

3200C14 would likely work just fine as mine has been for nearly two years now


CPU
i9-9940x With Optimus Foundation copper-plexi and Heatkiller VRM copper-plexi water block
Motherboard
ASUS x299 Rampage VI Apex
GPU
Titan Xp with copper-plexi Water Block
RAM
Trident Z 3600C16 4x8gb's b-die default timings 16-16-16-36
Hard Drive
Samsung 970 Evo Plus 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Optical Drive
LG Blu-Ray WH16NS40
Power Supply
evga 1200-P2
Cooling
D5 pump reservoir combo/ GTX280/ VRM block/ GTX280/ D5 top/ CPU block/ GPU block/ Mora 360/ repeat.
Cooling
MO-RA3 360 PRO stainless steel (25022)
Case
corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 pro & 10 pro Win-7 Primary os.
Monitor
ASUS VG248QE 24" 144Hz
Keyboard
Logitech G910 Orion spectrum
Mouse
Redragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
Other
5.0/https://valid.x86.fr/ez2ifr
CPU
i7-5930k with Heatkiller IV Pro Plexi-Copper and koolance vrm water blocks
Motherboard
X99 Sabertooth
GPU
EVGA 1080ti FTW3 with Water block
RAM
Trident-Z 3200C14 4x8gb's b-die default timings 14-14-14-34
Hard Drive
Samsung 970 Evo 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Power Supply
EVGA 1000-P2
Cooling
2-240 GTX Black Ice Nemesis rads/ D5 pump-res combo and D5 top before and after rads.
Case
Corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 and 10 pro Win-7 Primary os.
Monitor
AOC G2460PG 24"G-Sync 144Hz
Mouse
Red Dragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
Hard Drive
eLeaf MELO-3 4ml
Power Supply
SE US18650VTC6 3120mAh 30A 3.6V 18650 Li-ion Battery - GREENx4
Case
ANGIS Legion MOD 200w Geek Vape
Operating System
VapeWild RazzleBerry 50-50-0mg nic
▲ hide details ▲
ThrashZone is offline  
post #10779 of 10781 (permalink) Old 01-22-2020, 05:02 PM
New to Overclock.net
 
maxxx.ph's Avatar
 
Join Date: Apr 2011
Posts: 37
Rep: 1 (Unique: 1)
Quote: Originally Posted by zoson View Post
I run 960 evo on two rve and never had any problems.
Thanks for the reply. Will proceed installing one then. Much appreciated!

maxxx.ph is offline  
post #10780 of 10781 (permalink) Old 02-10-2020, 04:14 PM
New to Overclock.net
 
dpoverlord's Avatar
 
Join Date: Aug 2010
Posts: 1,928
Rep: 52 (Unique: 34)
So an odd question,

I have a 5930k overclocked to to 4.4ghz on air and I was wondering, if there would be an improvement upgrading the cpu at all? I read in the ASUS CPU chart that I can use a 6900k, 6850k, 6800k, 5960X. Can I use any newer cpu's?

Also, if I did I know my current chip does a pretty good job in 4k gaming. It's not always a perfect 60FPS but it's good. Would there be that dramatic of a difference? My system is using a 2080ti and I am feeling a slight upgrade itch.

I don't want to move to 299 as I feel that the motherboards don't seem to have changed much. I would like more USB-C slots, faster ports, etc.

HOWEVER, I do feel the itch and found a deal where I could sell my Rampage V Extreme and get the Rampage V 10 Edition as it was only $100 in a trade. Any thoughts? Is the v 10 edition that much better than the V Extreme with the USB 3.1 pci slot?
dpoverlord is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 3 (0 members and 3 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off