ASUS ROG Dominus Extreme CPU code 00 (New Build) - Overclock.net - An Overclocking Community

Forum Jump: 

ASUS ROG Dominus Extreme CPU code 00 (New Build)

Reply
 
Thread Tools
post #1 of 45 (permalink) Old 07-31-2019, 01:48 PM - Thread Starter
New to Overclock.net
 
elderan's Avatar
 
Join Date: Feb 2016
Posts: 279
Rep: 6 (Unique: 6)
ASUS ROG Dominus Extreme CPU code 00 (New Build)

So working on my new build and getting a CPU Code 00. I thought it was the motherboard and send the old one back and the new one is giving the same error.

This is what I have tried.

Replaced the MB (exact same from Amazon, serials are close)
Another PSU (Even though I know the current one is working)
Removing GPUs
Removing Ram
Removing NVME
Clearing CMOS
BIOS 1 and 2

I have read where people were getting CPU code 00 on these boards and some people had to go through 2-3 of them to get one that works. My main issue is Amazon wont cross ship so I have to return, buy new and at 2k a pop this is getting pricey. So I need to know what to focus on here. I mean it COULD be the CPU but IME its rare the cpu is bad but I am sure thats it I will need to RMA it with Newegg.


At this point is it the MB or CPU you think? Its getting really costly to keep trying things.

Setup is
ASUS ROG Dominus Extreme
Inten W-3175X
6x Corsair Dominator Platinum 32GB (2x16GB) DDR4 3200MHz C16 Desktop Memory
2x EVGA 2080ti Hydro Copper
Corsair AX1600i

elderan is offline  
Sponsored Links
Advertisement
 
post #2 of 45 (permalink) Old 07-31-2019, 01:49 PM
ლ(╹ε╹ლ)
 
Join Date: Aug 2013
Posts: 8,061
What CPU cooler are you using?


Duality92 is offline  
post #3 of 45 (permalink) Old 07-31-2019, 02:05 PM - Thread Starter
New to Overclock.net
 
elderan's Avatar
 
Join Date: Feb 2016
Posts: 279
Rep: 6 (Unique: 6)
Quote: Originally Posted by Duality92 View Post
What CPU cooler are you using?

EKWB EK-Velocity WS Narrow CPU Waterblock

elderan is offline  
Sponsored Links
Advertisement
 
post #4 of 45 (permalink) Old 07-31-2019, 02:09 PM - Thread Starter
New to Overclock.net
 
elderan's Avatar
 
Join Date: Feb 2016
Posts: 279
Rep: 6 (Unique: 6)
So here is a weird update. I followed this guys post on Newegg about these boards and cpu code 00.

https://www.newegg.com/Product/Singl...iewID=10215325

He basically said if you put a hair dryer to it and warm the Q code area up it will start. So I did this and it went past the CPU code 00 and went through all the codes but at the end said "Post error" and I never saw anything display on my monitor.

So I am back to, is this a board issue or a cpu issue. Unfortunately I dont have an extra 3k w-3175 laying around to test and my newegg RMA time is running out so I need to resolve this quick.

elderan is offline  
post #5 of 45 (permalink) Old 07-31-2019, 02:19 PM
Invalid Media
 
J7SC's Avatar
 
Join Date: Dec 2018
Posts: 858
Rep: 19 (Unique: 12)
Quote: Originally Posted by elderan View Post
So here is a weird update. I followed this guys post on Newegg about these boards and cpu code 00.

https://www.newegg.com/Product/Singl...iewID=10215325

He basically said if you put a hair dryer to it and warm the Q code area up it will start. So I did this and it went past the CPU code 00 and went through all the codes but at the end said "Post error" and I never saw anything display on my monitor.

So I am back to, is this a board issue or a cpu issue. Unfortunately I dont have an extra 3k w-3175 laying around to test and my newegg RMA time is running out so I need to resolve this quick.

...not entirely clear if you tried re-seating the CPU (other than per mobo exchange). From what I can gather, those sockets are particularity tricky to get all pins to properly connect, meaning that pushing on the the water-block and/or re-torqueing with a different pattern might help (see if it changes '00' while pushing on it). Also, have you tired just one or two RAM sticks to start things up ?

DerBauer vid makes some references to the socket

J7SC is offline  
post #6 of 45 (permalink) Old 07-31-2019, 02:37 PM - Thread Starter
New to Overclock.net
 
elderan's Avatar
 
Join Date: Feb 2016
Posts: 279
Rep: 6 (Unique: 6)
Ya I did try and re socket it a few times with various levels of tightness. In his video he never said anything about not booting at all just memory channels were a problem.

So what I am trying to figure out is when I apply the heat is it somehow bypassing the cpu check or is it just working but still erroring when trying to post.

elderan is offline  
post #7 of 45 (permalink) Old 07-31-2019, 02:37 PM
Overclocker in training
 
ThrashZone's Avatar
 
Join Date: Apr 2017
Posts: 7,021
Rep: 62 (Unique: 48)
Hi,
Bad chip or not on boards compatibility list :/

Vaper
(4 items)
CPU
i9-9940x With evo and koolance vrm water blocks
Motherboard
ASUS x299 TUF Mark 2
GPU
Titan Xp with copper Water Block
RAM
Trident Z 3600C16 4x8gb's b-die default timings 16-16-16-36
Hard Drive
Samsung 970 Evo Plus 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Optical Drive
LG Blu-Ray WH16NS40
Power Supply
evga 1200-P2
Cooling
2-280GTX Black Ice Nemesis rads with D5 pump-res combo and D5 top before and after rads.
Case
corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 pro & 10 pro Win-7 Primary os.
Monitor
ASUS VG248QE 24" 144Hz
Keyboard
Logitech G910 Orion spectrum
Mouse
Redragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
Audio
Built in realtek with Insignia 2.0 soundbar HSB318
CPU
i7-5930k with evo and koolance vrm water blocks
Motherboard
X99 Sabertooth
GPU
EVGA 1080ti FTW3 with Water block
RAM
Trident-Z 3200C14 4x8gb's b-die default timings 14-14-14-34
Hard Drive
Samsung 970 Evo 500gb M.2 for os/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Power Supply
EVGA 1000-P2
Cooling
2-240 GTX Black Ice Nemesis rads/ D5 pump-res combo and D5 top before and after rads.
Case
Corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 and 10 pro Win-7 Primary os.
Monitor
AOC G2460PG 24"G-Sync 144Hz
Mouse
Red Dragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
Hard Drive
eLeaf MELO-3 4ml
Power Supply
SE US18650VTC6 3120mAh 30A 3.6V 18650 Li-ion Battery - GREENx4
Case
ANGIS Legion MOD 200w Geek Vape
Operating System
VapeWild RazzleBerry 50-50-0mg nic
▲ hide details ▲
ThrashZone is offline  
post #8 of 45 (permalink) Old 07-31-2019, 02:41 PM - Thread Starter
New to Overclock.net
 
elderan's Avatar
 
Join Date: Feb 2016
Posts: 279
Rep: 6 (Unique: 6)
Quote: Originally Posted by ThrashZone View Post
Hi,
Bad chip or not on boards compatibility list :/
The ASUS ROG Dominus Extreme is specifically made for the w-3175 so its defiantly on the list. Its just so rare IME that a cpu is bad and people are having issues with this board. Doing a RMA with newegg is going to take weeks which will eat into my overall return time so its its the CPU I want to be 100% sure.

elderan is offline  
post #9 of 45 (permalink) Old 07-31-2019, 06:07 PM - Thread Starter
New to Overclock.net
 
elderan's Avatar
 
Join Date: Feb 2016
Posts: 279
Rep: 6 (Unique: 6)
So I took everything out, set it up on its own with just MB, CPU, GPU (from another machine I know works), 1 stick of memory, another PSU (which I know works)

Same issue.

Code 00 unless I put some heat on it with a blow dryer then it goes through all the codes and says "POST Error" and nothing displays.

I am still no closer to knowing if its cpu or mb.

elderan is offline  
post #10 of 45 (permalink) Old 07-31-2019, 07:28 PM
Overclocker in training
 
ThrashZone's Avatar
 
Join Date: Apr 2017
Posts: 7,021
Rep: 62 (Unique: 48)
Quote: Originally Posted by elderan View Post
The ASUS ROG Dominus Extreme is specifically made for the w-3175 so its defiantly on the list. Its just so rare IME that a cpu is bad and people are having issues with this board. Doing a RMA with newegg is going to take weeks which will eat into my overall return time so its its the CPU I want to be 100% sure.
Hi,
Send it to Intel unless you know of another shop :/
But I'd return the board first no telling how long it would take to get back from Intel....

Vaper
(4 items)
CPU
i9-9940x With evo and koolance vrm water blocks
Motherboard
ASUS x299 TUF Mark 2
GPU
Titan Xp with copper Water Block
RAM
Trident Z 3600C16 4x8gb's b-die default timings 16-16-16-36
Hard Drive
Samsung 970 Evo Plus 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Optical Drive
LG Blu-Ray WH16NS40
Power Supply
evga 1200-P2
Cooling
2-280GTX Black Ice Nemesis rads with D5 pump-res combo and D5 top before and after rads.
Case
corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 pro & 10 pro Win-7 Primary os.
Monitor
ASUS VG248QE 24" 144Hz
Keyboard
Logitech G910 Orion spectrum
Mouse
Redragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
Audio
Built in realtek with Insignia 2.0 soundbar HSB318
CPU
i7-5930k with evo and koolance vrm water blocks
Motherboard
X99 Sabertooth
GPU
EVGA 1080ti FTW3 with Water block
RAM
Trident-Z 3200C14 4x8gb's b-die default timings 14-14-14-34
Hard Drive
Samsung 970 Evo 500gb M.2 for os/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Power Supply
EVGA 1000-P2
Cooling
2-240 GTX Black Ice Nemesis rads/ D5 pump-res combo and D5 top before and after rads.
Case
Corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 and 10 pro Win-7 Primary os.
Monitor
AOC G2460PG 24"G-Sync 144Hz
Mouse
Red Dragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
Hard Drive
eLeaf MELO-3 4ml
Power Supply
SE US18650VTC6 3120mAh 30A 3.6V 18650 Li-ion Battery - GREENx4
Case
ANGIS Legion MOD 200w Geek Vape
Operating System
VapeWild RazzleBerry 50-50-0mg nic
▲ hide details ▲
ThrashZone is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off