I sincerely apologize if this has been posted before but I did do a thread search and couldn't find it.
Im pretty sure the H80 will be compatible with NZXT M59 in a push - pull using the rear 120 fan slot. But i'm wondering if the H100 will be supported if I do a Push-Pull using the Top two 120 mm fan slots.
The reason I ask is that the top slots are also for 140mm fans thus I just wanted to make sure that there isn't any unnecessary spacing between the two 120 slots. Thank you so much for your help!
I honestly don't see the H100 fitting inside the M59 in push-pull, and you may have trouble fitting it in just push OR pull depending on motherboard. You could push the radiator as close to the door side as possible and *maybe* clear motherboard interference but it's not pretty and some of your power connectors and ram slots may be blocked if they are near the top of the board:
I had to cut a hole for the pump and mount the radiator externally on my gamma because the VRM heatsinks did not allow space for the fans when mounted internally (centered in the grill like it is supposed to)...The gamma and M59 are essentially the same case. Like Mattyd said the spacing is incorrect for the H100 and you would have to trim the grill in 2 spots for the screws to line up with the radiator if you have room to center it.
One of the fans on my H100 died within 2 days of its receipt. I called corsair, the rep emailed me a coupon code for the h100 fan kit (2x120mm fans) free with free ups ground shipping so i now have an extra fan