Originally Posted by sultanofswing
Not sure I am happy with this case over my 0-11XL right now.
Went from 3 360mm radiators in the 0-11XL to
the same 3 360mm radiators plus a 480mm radiator and Water temp at idle seems to have went up nearly 2 degrees at the same ambient.
Opening the side door drops the temp right at a degree, I think the bottom chamber is trapping a lot of heat and not working efficiently.
480 at the bottom is push/pull with 8 artic P12's (these fans actually perform very well)
Front 360 same artic P12's but only in pull
Bottom 360 same artic P12's in push mode under the midplate (this is what I think may be causing the issue)
Top 360 with 3 Noctua NF-P12x25's in pull mode.
All fans are running at 1500RPM at idle as the noise there is not bad at all.
I am going to do some testing this weekend by removing the bottom 360 that is in the same chamber as the 480 and see if this relieves some of the excess heat.
Case needs a better way to exhaust the bottom chamber.
I put a fan either end of the bottom chamber (front and back) to help direct the heat out of the back which seems to help.
Case: Enthoo Elite, CPU: i9-7900X Motherboard: Rampage VI Extreme
RAM: Dominator Platinum 32GB, GPU: EVGA 2080 Ti FTW3 & 2080 FE
Storage: 960 Pro 512GB, 2 x 840 Evo 250GB, PSU: EVGA SuperNOVA 1200 P2
Monitor PG279Q, MX27AQ
Custom Watercooling Loop + Aquaero 6 XT
Last edited by trawetSluaP; 03-29-2020 at 12:19 PM.