External radiator mount - Page 2 - Overclock.net - An Overclocking Community

Forum Jump: 

External radiator mount

Reply
 
Thread Tools
post #11 of 17 (permalink) Old 02-22-2019, 03:11 PM
9 Cans of Ravioli
 
The Pook's Avatar
 
Join Date: May 2006
Posts: 18,833
Rep: 1451 (Unique: 731)
Yeah, they're 165 CFM, they're loud at 100%. That's why you undervolt and set a custom fan curve. Mine run at 20% until 85c slowly increase to 35% by 95c and I haven't heard them ramp up outside when I bench at 1.4v+ for HWBOT.

They make 2000RPM industrials that are quieter than the 3000s if you want to get those. The 2000s can undervolt to a slower RPM but they're the same price. I'd just get the 3000s and under volt them, they undervolt just fine to inaudible levels.

Intel i9 9900K Coffee Lake @ X8 5309mhz (+47.5%)
AMD FX-8320 Vishera @ X4 5022mhz (+43.5%)
Intel i5 4690K Haswell @ X4 5013mhz (+43.2%)
AMD X4 960T Zosma @ X6 4870mhz (+62.3%)
Intel i7 6700 Skylake @ X4 4709mhz (+38.5%)
Intel i5 6400 Skylake @ X4 4588mhz (+69.9%)
2 OP pls nerf
(24 items)
NUC U
(9 items)
CPU
i9 9900K
Motherboard
AsRock Z390 Taichi
GPU
MSI GTX 1080 Ti
RAM
G.Skill DDR4 4133 32GB
Hard Drive
XPG SX8200 Pro NVMe 2TB
Hard Drive
HP EX950 NVMe 2TB
Hard Drive
2x Samsung 860 1TB RAID 0
Hard Drive
WD Blue 4TB SSD
Power Supply
Seasonic Focus Plus Gold 750w
Cooling
Corsair H115i Pro
Cooling
Raijintek Morpheus II
Case
Fractal Design Meshify S2
Operating System
Windows 10 Education x64
Monitor
Acer XF270HU 27" 1440p
Monitor
LG 24UD58 24" 4K
Keyboard
CoolerMaster MK730 (MX Blue)
Mouse
Glorious Model D
Mousepad
X-Ray 27" x 14"
Audio
Klipsch PowerGate
Audio
Schiit Hel
Audio
Micca RB42
Audio
Philips Fidelio X2
Audio
Philips SHP9500S
Audio
Audio Technica ATH-M50X
CPU
i3 8109U
Motherboard
Intel NUC8i3BEH
GPU
Iris Plus 655
RAM
Kingston DDR4 2400 16GB
Hard Drive
Mushkin Pilot NVMe 1TB
Hard Drive
SanDisk Ultra II 480GB
Operating System
Windows 10 Professional
Keyboard
Dierya DK63 60% (Outemu Blue)
Mouse
Logitech G603
▲ hide details ▲


The Pook is offline  
Sponsored Links
Advertisement
 
post #12 of 17 (permalink) Old 02-22-2019, 03:19 PM - Thread Starter
New to Overclock.net
 
Montoya1's Avatar
 
Join Date: Sep 2010
Posts: 279
Rep: 0
95c seems very hot for a CPU.

Montoya1 is offline  
post #13 of 17 (permalink) Old 02-22-2019, 03:29 PM
9 Cans of Ravioli
 
The Pook's Avatar
 
Join Date: May 2006
Posts: 18,833
Rep: 1451 (Unique: 731)
Yeah? It's an 8 core at ~1.4-1.45v on an anemic 280 AIO. It's gonna be hot.

I only run that voltage for however long it takes to run a benchmark, then I'm down to 1.3v.

Intel i9 9900K Coffee Lake @ X8 5309mhz (+47.5%)
AMD FX-8320 Vishera @ X4 5022mhz (+43.5%)
Intel i5 4690K Haswell @ X4 5013mhz (+43.2%)
AMD X4 960T Zosma @ X6 4870mhz (+62.3%)
Intel i7 6700 Skylake @ X4 4709mhz (+38.5%)
Intel i5 6400 Skylake @ X4 4588mhz (+69.9%)
2 OP pls nerf
(24 items)
NUC U
(9 items)
CPU
i9 9900K
Motherboard
AsRock Z390 Taichi
GPU
MSI GTX 1080 Ti
RAM
G.Skill DDR4 4133 32GB
Hard Drive
XPG SX8200 Pro NVMe 2TB
Hard Drive
HP EX950 NVMe 2TB
Hard Drive
2x Samsung 860 1TB RAID 0
Hard Drive
WD Blue 4TB SSD
Power Supply
Seasonic Focus Plus Gold 750w
Cooling
Corsair H115i Pro
Cooling
Raijintek Morpheus II
Case
Fractal Design Meshify S2
Operating System
Windows 10 Education x64
Monitor
Acer XF270HU 27" 1440p
Monitor
LG 24UD58 24" 4K
Keyboard
CoolerMaster MK730 (MX Blue)
Mouse
Glorious Model D
Mousepad
X-Ray 27" x 14"
Audio
Klipsch PowerGate
Audio
Schiit Hel
Audio
Micca RB42
Audio
Philips Fidelio X2
Audio
Philips SHP9500S
Audio
Audio Technica ATH-M50X
CPU
i3 8109U
Motherboard
Intel NUC8i3BEH
GPU
Iris Plus 655
RAM
Kingston DDR4 2400 16GB
Hard Drive
Mushkin Pilot NVMe 1TB
Hard Drive
SanDisk Ultra II 480GB
Operating System
Windows 10 Professional
Keyboard
Dierya DK63 60% (Outemu Blue)
Mouse
Logitech G603
▲ hide details ▲


The Pook is offline  
Sponsored Links
Advertisement
 
post #14 of 17 (permalink) Old 02-22-2019, 03:38 PM - Thread Starter
New to Overclock.net
 
Montoya1's Avatar
 
Join Date: Sep 2010
Posts: 279
Rep: 0
Quote: Originally Posted by The Pook View Post
Yeah? It's an 8 core at ~1.4-1.45v on an anemic 280 AIO. It's gonna be hot.

I only run that voltage for however long it takes to run a benchmark, then I'm down to 1.3v.
True, I am running a 360 and 140 so if I hit 95c something is off haha.

I currently have 2 ML140's however they seem to be super loud like a loud buzzing. Im not sure if this is normal for the fan however thats why I am asking.

Montoya1 is offline  
post #15 of 17 (permalink) Old 02-23-2019, 11:40 AM
New to Overclock.net
 
drewafx's Avatar
 
Join Date: Nov 2016
Posts: 137
Rep: 5 (Unique: 5)
Outside the case means much more direct noise...I'd get decoupling mount on the radiator (usually for pumps) and dampening shroud for fans (especially if going for 2000+rpm...reminiscent of jet engine for my 2150rpm gentle typhoons on 30fpi rad)
As for quietness, Noctua A12X25 has really great performance per decibel (they also sell 120mm to 140mm adapter).
It bumps the silence rpm range from 700 of other fans to 1300, tolerable until 1600, then just fan noise @2000, no annoying vibration/resonance. It's on XSPC RX rad (thick, low fpi) though, so thinner denser fins may amplify the noise.
If you're going for push/pull, I highly recommend HWLabs Nemesis 140 GTX. It's rated to be best push/pull 140mm rad here:
https://www.xtremerigs.net/2015/11/1...ator-review/6/
drewafx is offline  
post #16 of 17 (permalink) Old 02-23-2019, 01:02 PM - Thread Starter
New to Overclock.net
 
Montoya1's Avatar
 
Join Date: Sep 2010
Posts: 279
Rep: 0
Quote: Originally Posted by drewafx View Post
Outside the case means much more direct noise...I'd get decoupling mount on the radiator (usually for pumps) and dampening shroud for fans (especially if going for 2000+rpm...reminiscent of jet engine for my 2150rpm gentle typhoons on 30fpi rad)
As for quietness, Noctua A12X25 has really great performance per decibel (they also sell 120mm to 140mm adapter).
It bumps the silence rpm range from 700 of other fans to 1300, tolerable until 1600, then just fan noise @2000, no annoying vibration/resonance. It's on XSPC RX rad (thick, low fpi) though, so thinner denser fins may amplify the noise.
If you're going for push/pull, I highly recommend HWLabs Nemesis 140 GTX. It's rated to be best push/pull 140mm rad here:
https://www.xtremerigs.net/2015/11/1...ator-review/6/
Thats the RAD I have currently. I'll try to record the noise so you get a better idea of what I am talking about.

Montoya1 is offline  
post #17 of 17 (permalink) Old 05-12-2019, 07:37 AM
Back at it again.
 
Avacado's Avatar
 
Join Date: Jan 2007
Location: Asheville, NC
Posts: 1,714
Rep: 107 (Unique: 81)
Nothing wrong with an external mount at all. If you do it right, it can still look clean and sexy. See below. No idea why it oriented sideways.
Attached Thumbnails
Click image for larger version

Name:	20190512_103857.jpg
Views:	54
Size:	3.66 MB
ID:	269236  


CPU
i9 9900k @5.1GHz 1.34v
Motherboard
ASUS Prime Z390-A 1504 BIOS
GPU
Evga 2080 Ti Black Gamer +220 Core
GPU
Evga 2080 Ti Black Gamer +150 Core
RAM
4x8GB GSkill TridentZ DDR4 3600
Hard Drive
2 x 1 TB Samsung EVO 970 Raid 0
Power Supply
EVGA 1000w G+
Cooling
EK CPU/GPU/RES
Cooling
2x aCool UT60 RADs
Case
Lian Li O11 Dynamic XL (White)
Operating System
Windows 10
Monitor
Alienware 1900R 34.1" @ 120Hz
Keyboard
Loigitech G910
Mouse
Logitech G700s
▲ hide details ▲



Last edited by Avacado; 05-12-2019 at 07:41 AM.
Avacado is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off