Typically 15-25C rise above ambient for a medium low range setup
Typically 5-10C Rise above ambien for a high end setup (3x 360mm doubble standard thickness alloy rad with fans running on low speed Soundless devil build I own)
Typically -5 to 5C diffrence between ambient for peltier cooling the water or warter chiller setup
Hot tubes isn't a concern if they don't bend and block them selvs up reducing the flow
But is a issue if they got so hot and start leaking, though should be rare
My tubes very cheap ones do soften over time even if it is not exposed to temps more than 40C
If you want rock solid operation you can by the springs plastic ones to help it prevent bending, possible for sale on aliexpress.
Also buying the expensive tubing will have high flexibiily relibality and not block flow when bent.
Even better is to route the stuff using combo of straight and 90 degree fittings to get it straight
You can buy 90 degree pices which connect 8mm to 8mm tubing or 10mm to 10mm tubing.
Temps are from my exprience and these are assuming your fully loading the system up using prime testing.
Also running the fans at medium to low speeds
Overcloking is about the passion, not about how much you clock
Overclocking is not about the pefromance gains, it is about the passion
Overclocking is about the Fun, Enjoyment and Passion
Pushing Voltages And Lower Tempertures Makes You The Overclocking Champion
Last edited by Iwamotto Tetsuz; 07-31-2019 at 10:25 PM.