Here is my finished 011 dynamic XL build. I have build a water cooled PC a few years back but it was a soft tubing and barb set up. This is my first hard line build. I was pretty nervous about doing the tube bends but after some practice it became pretty easy. I had started out using the Thermaltake bending kit but I noticed I was getting better bends just doing it by hand. The hardest bend by far was the short bend between the top of the distribution block and the upper radiator.
Anyway I could ramble on but here are the specs and some pics, enjoy.
Specs are as follows:
Lian Li 011 dynamic XL case silver
EK momentum CPU block
Phanteks Glacier GPU block
EK PE 360 upper Rad
EK XE 360 Lower Rad
EK Torque HTC fittings 16mm
EK PETG tubing
EK Distroplate for 011 Dynamic
Fluid EK Cryofuel Blood red
Thermaltake Riing Trio fans with TT sync controller for Aura integration
CPU AMD 3950x
GPU Asus ROG strix 2080 TI
MOBO ASUS Crosshair 8 Hero Wifi x 570
RAM Gskill Neo 32GB
Corsair MP600 Nvme 1TB x 2 ( PCIe 4.0 !!)
Samsung Evo 860 2TB SSD
EVGA G2 1000W Supernova PSU (old but still good !)
Last edited by Hardrock; 02-06-2020 at 05:01 AM.