I7 7700k running hot on custom loop
I have a custom watercooling with an Alphacool waterblock, i have the bitspower distribution block for lian li pc o11 dynamic case which i have to and the Thermaltake CL-W010-AL00BL-A R360. Now that you know that, I have an i7 7700k sitting on an asus z270-e motherboard with some arctic MX-2 thermal paste. I use distilled water as coolant. I have the ventilators in a pull configuration with air coming from the outside not the inside of the case. I haven’t done a stress test but i can already tell it doesn’t cool very good because at idle it runs at 30/35 degrees C and at 30% load ut already runs at 65 degrees C. I have the system running in quiet mode but as it runs pretty hot it never really is quiet because the ventilator rpm jumps sometimes while the temps randomly spike at 66 while the cpu goes from idle to 30% for no reason. If you have any idea why it runs so hot please because when i play and have the ventilators do their own thing i some time got 100/110 degrees C at which point i really flipped out 😂.