Corsair H115i pump base screws.
I decided to lap the bottom of a Corsair H115i my buddy gifted me and subsequently decided to remove the copper plate. I half stripped maybe 3 screws in the process. I cleaned the inside where the fins are and topped up the loop with a bit of distilled water since I don't have proper fluid. I put everything back together again and I know for sure one screw stripped after tightening them.
So, anyone know if I can find replacement screws so I can do a full loop cleaning/refilling at a later date? Or direct me somewhere I can find a broken corsair with compatible screws?
The process was worth it, before lapping/cleaning fin array I was getting high 80s during cinebench and now it wont break 75 even at 40%fan and pump at quiet. So it was totally worth it.
Intel Devil's Canyon Owners Club
Asus X570 TUF wifi
T-Force Dark Pro 16GB 3200C14
Plextor PCIE SSD
1TB HP EX920 m.2
2TB Samsung 860 QVO
1TB WD Blue 2.5"
Fractal Design Ion+ 760p
Cryorig R1 Ultimate (lapped)
BeQuiet Dark Base 700 (inverted motherboard config)
▲ hide details ▲