HEATKILLER Tube - MultiPort Top does it have holes, is there a thread? I found the following photo:
Yes, that is correct. Those are thread M4. If you have a standalone tube without pump, you could mount the res on these positions (there are two more in the bottom piece, as well). We don't recommend doing so when you have an integrated pump version, as that would transfer vibrations to the case.
I currently have a 1080ti with a Heatkiller GPU block. I also have a hardline watercooling build, so I can't adjust my tube positions. If I were to upgrade to a 2080ti and buy a Heatkiller GPU block for it, are the inlets at the same spatial position as the 1080ti blocks? I tried to figure it out from the pictures on your site but I can't. Basically, I want to know if I could take my Heatkiller 1080ti block out of my loop and replace it with a Heatkiller 2080ti block without having to rebend/recut any tubes.
- CPU Block: TR4 Block - Nickel
- GPU Block: 2080 Ti Nickel RGB (synched with Reservoir strips)
- VRM: Asus X399 Block
- Reservoir: 150 D5 with Silver struds and RGB strips (synched with GPU)
Next time I should use your rads
Looks gorgeous! What is this display with flow rate etc.? I Saw some Barrowsomething displays but they are aluminium inside so it's a no go for me, is this that one? Also - glass tube or you just don't like bending tubes :-)