[Official] AMD R9 390/390X Owners Club - Overclock.net - An Overclocking Community

Forum Jump: 

[Official] AMD R9 390/390X Owners Club

Reply
 
Thread Tools
post #1 of 12066 (permalink) Old 06-23-2015, 07:41 AM - Thread Starter
New to Overclock.net
 
Join Date: Aug 2014
Location: Raleigh, NC
Posts: 3,816
Rep: 129 (Unique: 88)
The OCN Official R9 390 / 390X Owners' Club!




The latest refreshment of the Hawaii Pro and Hawaii XT (code named Grenada Pro and Grenada XT respectively) can be found in the new AMD R9 390 and 390X GPU's.

Where the last Hawaii Series was the enthusiest level line of GPU's, the new 300 series will be considered mainstream.
But don't let this relabeling of our beloved Hawaii cards fool you!!! These cards bring some exciting reform to the table!!!



To be added on the member list please submit the following in your post:

1. PROOF- Either GPU-Z Link with OCN name or Screen shot of GPU-Z validation tab open with OCN Name or a simple pic of your actual GPU with your OCN name showing somewhere in the picture.
2. Manufacturer & Model if not reference
3. Cooling - Stock, Aftermarket or 3rd Party Water




Specs (Not much here you haven't seen!)
Warning: Spoiler! (Click to show)
390X:
Stream Processors: 2816
Compute Units: 44
Clock Speed: 1050MHz
Compute Performance: 5.9TF
Texture Units: 176
ROPs: 64
Memory: 8GB GDDR5
Memory Interface: 512-bit
Memory Speed: 6.0gpbs
TDP: 275W-300W
Fabrication Process: 28nm

390:
Stream Processors: 2560
Compute Units: 44
Clock Speed: 1000MHz
Compute Performance: 5.9TF
Texture Units: 176
ROPs: 64
Memory: 8GB GDDR5
Memory Interface: 512-bit
Memory Speed: 6.0gpbs
TDP: 275W
Fabrication Process: 28nm

Reviews: Warning: Spoiler! (Click to show)


Owners:


Driver:

UPDATED 7/8/15
HERE

AMD Has now released the 15.7 driver that covers all of their GPU's for Windows 7, 8.1, and Windows 10.
This driver seems to have brought the tessellation improvements found on the original 390/390X 15.15 driver to the entire Hawaii series (290/290X).
I have personally tested the driver and it performs very well in all games tested
.




Mainstream you say?

Yes, this card is a mainstream card, though it is on the high-end side of mainstream.
You will find the best performance/per dollar (while still having great 1080P performance) in this range.

Here are some things to keep in mind:

1. Fury X is 11% faster on average than the 390X @ 1080P
and 18% faster on average than the 390X @ 4K yet cost 34% more

2. Fury X is 16% faster on average than the 390 @ 1080P
and 22% faster on average than the 390 @ 4k and cost 49% more


When considering a GPU purchase, please keep overall performance, price, and price/performance ratio in mind. Below is a chart that I will be updating whenever major price changes occur.





WHICH CARD IS FOR ME?

Let's start with some generalizations about each brand that I have simply made for myself based on user information....
then we will branch off into details and photos...Here is a beak down on what I have seen with these cards so far. Keep in mind that aesthetics were not considered, as that is a personal preference

XFX= Full cover waterblock available. SEE COOLING SECTION! These are good clockers usually, and cooling is good for core, but not stellar, and VRM cooling has been revised to stay much cooler than early versions of this card.

Sapphire=SEMI-COVER waterblocks are now available from Alphacool!!! Not to mention this card has excellent air cooling. Require 8+8 pin connectors versus 8+6. Some would prefer that, in hopes of obtaining higher OC results, but unfortunately OC results so far on the Nitro and Tri-X are only mediocre-good

Gigabyte= No waterblocks. Well built card, decent cooling, but the voltage is hard locked, so expect clock ceiling to be very limited... most likely 1100 or less.

PowerColor= Offers full cover waterblocks, and also has excellent air cooling, but so far there have only been weak-mediocre-ish overclocking results. 1150 or less on the core seems to be the norm, with most landing between 1130-1140, even despite it's excellent cooling.

MSI= SEMI-COVER waterblocks are now available from Alphacool!! Stock air cooling is good but not great with regards to the core temps, but seems to be very good for the VRM temps. So far, these seem to have the best overclocking results. Most poeople hitting 1160-1200

Asus= (DCU2) Full cover block available. Not much info on these, but theyappears to use the same cooler as the 290 series, which was a poor performing cooler. I have seen very few purchasing the Asus card. Overclock results seem to be average so far, but have very little data to make a general claim.

Asus= (Strix) Unsure on waterblocks with these... stock cooling is good. Very little OC information, but from what I have seen, they are average. Probably in line with Sapphire when it comes to binning.


And now the details and pictures....

>



devil.gifOVERCLOCKING SECTION devil.gif

To overclock these cards, one can simply use the Overdrive function of the Catalyst Control Center, but for anyone wanting to overclock these cards outside the constraints of factory voltage, you will need a third party application. I normally recommend one of the following utilities:

***Keep in mind that these utilities, to my knowledge, will work with all manufacturers' cards***


Then, there is also Asus' GPU Tweak, but it is not known if this utility supports all 300 series cards yet, or only those supplied by Asus.
It can be found
HERE


After gathering more overclocking information from new members, and based on my personal experience, it is apparent that these cards, while capable of reaching respectable clock speeds, are not capable of much higher overclocks than were achieved on the 290/290X cards.

At this point, most members are able to reach speeds of 1090-1150 on stock voltage, which is not very common on the 290 series.

Many members are finding themselves in the 1150-1200 range using 50-100mv+ voltage offset. These results are inline with some of the better clocking 290's I've seen, but not congruent with some of the golden samples I have seen from the 290 series, that will exceed 1200MHz using more than 100mv offset, and these certainly don't seem to like high voltages and clocks over 1200MHz at all.....

It appears that while these cards clock higher than the 290 series using less voltage, they inherently don't clock higher than the 290's using MORE voltage.... (kookoo.gif right?) Well actually, here's why.. or at least my current theory as to why.... With the improved "low leakage" silicon used on this series, we are getting higher clocks within a low to moderate voltage range (0-100mv+), but due to the nature of these newer chips, they do not respond to high voltage (over 100mv) because they can not bleed the voltage off. This causes these chip to exhibit higher temps also. They all seem to get to a stopping point (around 1180MHz on average), and then they are simply "done" (I've not seen any stable over 1200mhz, self included). Even in spite of how cool you get them, and how much juice you send. These characteristics are very similar to AMD's improved process to their Vishera family of CPU's. This improved process has major advantages for the average user who does standard overclocking on air using no or mild voltage bumps, however this series may not be the best option for extreme overclockers who plan to put their cards on custom water loops and use high amounts of voltage. Definitely stick with modified 290 boards (ala Lightning / Matrix) for that kind of stuff thumb.gif

I had theorized early on that these cards would clock much better on water, but as more water results surface, we are still seeing these cards run out at 1200MHz. It's not to say there aren't some samples out there capable of doing marginally better, or who knows, maybe a lot better......
but as of now, these are 1200MHz or less Hawaii cards....

Now, it's not to say they WON'T run at higher clocks, but you won't get better performance, as the cards just tend to give deminish returns at a certain point. This is not due to temps or throttling or power either, it's just simply an "unhappy" card after that point.

I have personally benchmarked my card at 1220 MHz/1750 using 150mv/50mv+, and with no artifacts at all, only to find that it scores better at 1200Mhz at 100mv. And even 1200MHz at 100mv only scores a few more points (FireStrike graphics score) than running at 1190 with 75mv, and 1180MHz on 60mv.

NOW, the non-debatable, and good news for all overclockers... The Memory IC's are hands-down, great clockers on this series, and users are finding themselves in the 1700+ range on a regular basis.

I too was able to break the 1750MHz mark, but only with the addition of AUX voltage.


Anyone finding their cards memory to be capping at 1600MHz may want to try 25-50mv+ (or more) AUX voltage to achieve a higher clock speed.


For members who are overclocking their cards, and would like their results to be reported on the owner spread sheet, PLEASE include your clock speeds, your voltage offset used to achieve them, and a benchmark for some verification.





***More to come on votlage, temps, cooling, etc.... again, PLEASE STAY TUNED!!....***


post-flame-small.gif: COOLING post-flame-small.gif
This section will be a work in progress as more information is gathered on coolers, aftermarket blocks, etc...



For those planning on running their cards with factory cooling, keep this in mind:

MANY CARDS are equipped with a zero-state fan feature that completely turns the fan off as long as the temp is under 60c. This will cause idle temps to be very high, but it is completely safe. Also, even when the GPU does break 60c at idle (for example, another member mentioned their idle temp was 65c) the fans will only spin at a very low speed. This is done to maintain a silent experience at idle/general usage.

If you would prefer to reduce the idle temperature, you can create a custom fan profile in one of the third party OC utilities posted in the overclocking section.



COFIRMED (UPDATED 7/15/15)


The only full cover EK blocks that are cross compatible between 290 and 390 series cards, are those manufactured for Asus DCU, XFX DD (ACCORDING TO MEMBERS AND REPORTS, THE XFX CARD IS NO LONGER COMPATIBLE WITH EK BLOCKS!!!! THIS IS DUE TO A PCB/COOLING REVISION TO IMPROVE VRM COOLING.... oh the irony...rolleyes.gif ), and PowerColor PCS+ cards.

However, Alphacool has now began producing a semi-cover blocks for the Sapphire and MSI cards, which uses a water block, mated to a large passivbe heatsink to cool the VRM's. Good news for owners of those cards, as those cards are both quite popular!




Again, please stay tuned for more information....


Have something to contribute to our main post? teaching.gif

Contact me through PM and I will make sure any valid and useful information is added, along with you credentials and a nice "thank you!" thumb.gif

Agent Smith1984 is offline  
Sponsored Links
Advertisement
 
post #2 of 12066 (permalink) Old 06-23-2015, 07:45 AM - Thread Starter
New to Overclock.net
 
Join Date: Aug 2014
Location: Raleigh, NC
Posts: 3,816
Rep: 129 (Unique: 88)


thumb.gif

Agent Smith1984 is offline  
post #3 of 12066 (permalink) Old 06-23-2015, 12:47 PM
Stock
 
hyp36rmax's Avatar
 
Join Date: Jan 2012
Posts: 3,712
Rep: 144 (Unique: 122)

Great thread! Looking forward to it.  Hopefully all the R9 290(X) tweaks roll over to the refreshed series. :thumb:


hyp36rmax is offline  
Sponsored Links
Advertisement
 
post #4 of 12066 (permalink) Old 06-23-2015, 12:58 PM
New to Overclock.net
 
DividebyZERO's Avatar
 
Join Date: Jul 2014
Posts: 1,152
Rep: 63 (Unique: 48)
DividebyZERO is offline  
post #5 of 12066 (permalink) Old 06-23-2015, 01:13 PM - Thread Starter
New to Overclock.net
 
Join Date: Aug 2014
Location: Raleigh, NC
Posts: 3,816
Rep: 129 (Unique: 88)
Here's my thoughts for anyone thinking about these cards...

If you buy one, I think you made a great choice....

If you don't buy one, I completely understand redface.gif

At the end of the day, I am thrilled to be the first on here to own one of these cards.
I know these are now going to be considered mainstream GPU's, but I feel like these cards are still pretty beastly, and are great performers for the money.

Just stay tuned..... This will be a work in progress.

Teaser info....

This 390 is about 14% faster out of the box than my 290 Tri-x OC.

At 100+MV I have hit 1180/1600 with full stability.

I will finish finding the max VRAM clock this evening, and then continue to push voltage from there for more core frequency. thumb.gif

Agent Smith1984 is offline  
post #6 of 12066 (permalink) Old 06-23-2015, 02:13 PM
Linux Lobbyist
 
Amhro's Avatar
 
Join Date: Mar 2011
Location: Slovakia
Posts: 984
Rep: 22 (Unique: 21)
I'm joining you in (hopefully) 12 hours! Can't wait biggrin.gif

vlocka
(14 items)
CPU
AMD RYZEN 7 2700X
Motherboard
ASUS CROSSHAIR VII HERO
GPU
MSI R9 390
RAM
G.SKILL TRIDENT Z 16GB 3200/14
Hard Drive
Samsung 970 Evo
Hard Drive
Crucial M4
Power Supply
Corsair RM650i
Cooling
COOLER MASTER MasterLiquid ML240L RGB
Case
PHANTEKS P400S TG White
Operating System
Windows 10 Pro
Monitor
BenQ G2420HDB
Keyboard
A4 X7
Mouse
A4 V8M
Audio
HyperX Cloud
▲ hide details ▲
Amhro is offline  
post #7 of 12066 (permalink) Old 06-23-2015, 02:49 PM
New to Overclock.net
 
sTOrM41's Avatar
 
Join Date: Jul 2009
Location: Germany
Posts: 21
Rep: 4 (Unique: 4)
Quote:
Originally Posted by Agent Smith1984 View Post


This 390 is about 14% faster out of the box than my 290 Tri-x OC.

huh?confused.gif
hard to believe.
sTOrM41 is offline  
post #8 of 12066 (permalink) Old 06-23-2015, 03:27 PM - Thread Starter
New to Overclock.net
 
Join Date: Aug 2014
Location: Raleigh, NC
Posts: 3,816
Rep: 129 (Unique: 88)
Quote:
Originally Posted by sTOrM41 View Post

huh?confused.gif
hard to believe.

Stock 290 Tri-X pulled around 10,800 graphics score in FireStrike

Stock MSI Gaming 390 is pulling 12,500!!!

proof.gif http://www.3dmark.com/fs/5184408

Notice Futuremark has mislabeled the card as a 380... They'd better get this fixed quickly!

An overclcoked run so you can see that the clocks aren't fudged on the first run. http://www.3dmark.com/fs/5184788
Firestrike definitely reports the clocks correct every time with these cards (had issues with this on the 2 series)!

Agent Smith1984 is offline  
post #9 of 12066 (permalink) Old 06-23-2015, 03:53 PM
New to Overclock.net
 
sTOrM41's Avatar
 
Join Date: Jul 2009
Location: Germany
Posts: 21
Rep: 4 (Unique: 4)
cant tell why, but my [email protected] bios is also faster than with my 290 bios at firestrike,
on the other hand fps in games are pretty much the same.
sTOrM41 is offline  
post #10 of 12066 (permalink) Old 06-23-2015, 03:59 PM - Thread Starter
New to Overclock.net
 
Join Date: Aug 2014
Location: Raleigh, NC
Posts: 3,816
Rep: 129 (Unique: 88)
Quote:
Originally Posted by sTOrM41 View Post

cant tell why, but my [email protected] bios is also faster than with my 290 bios at firestrike,
on the other hand fps in games are pretty mich the same.

Part of the performance boost lay within the 15.15 driver. thumb.gif

My minimum FPS are up about 8-10% from my 290, and the max FPS are up as high as 15% in some cases.

Throw in the extra clock speed I can hit on this card, and it definitely makes for a better experience.

I'm not saying anyone with a 290/290x needs to go out and get one of these cards, but anyone with a 7 series/ or <280 series would really be getting a nice upgrade here!

This refresh/driver combination is a winner in my opinion!

Agent Smith1984 is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off