R_Timings - Encode/Decode RX/R9 Memory Straps

what is the procedure to use ohgodadecode for R9 290 bios I see diffrent timings when I compare ohgodadecode and R_Timings_R9

ohgodadecode - FFF1332000000000AD495930705509102D23E9030068C30022AA1C08640F1420BA8980A7000007C01914262B512E3E13

TRCDW=16 TRCDWA=11 TRCDR=21 TRCDRA=18 TRRD=0 TRC=16 Pad0=0

TNOPW=1 TNOPR=3 TR2W=18 TCCDL=1 TR2R=2 TW2R=9 Pad0=7 TCL=3 Pad1=0

TRP_WRA=0 TRP_RDA=80 TRP=13 TRFC=12 Pad0=0

PA2RDATA=2 Pad0=0 PA2WDATA=2 Pad1=0 TFAW=10 TCRCRL=5 TCRCWL=28 TFAW32=0

MC_SEQ_MISC1: 0x20140F64
MC_SEQ_MISC3: 0xA78089BA
MC_SEQ_MISC8: 0xC0070000

ACTRD=25 ACTWR=20 RASMACTRD=38 RASMACTWR=43

RAS2RAS=81 RP=46 WRPLUSRP=62 BUS_TURN=19


####SEQ_WR_CTL_D1####
DAT_DLY = 15
DQS_DLY = 15
DQS_XTR = 1
DAT_2Y_DLY = 0
ADR_2Y_DLY = 0
CMD_2Y_DLY = 0
OEN_DLY = 15
OEN_EXT = 3
OEN_SEL = 3
ODT_DLY = 0
ODT_EXT = 0
ADR_DLY = 1
CMD_DLY = 0
####SEQ_WR_CTL_2####
DAT_DLY_H_D0 = 0
DQS_DLY_H_D0 = 0
OEN_DLY_H_D0 = 0
DAT_DLY_H_D1 = 0
DQS_DLY_H_D1 = 0
OEN_DLY_H_D1 = 0
WCDR_EN = 0
####SEQ_PMG_TIMING####
TCKSRE = 2
TCKSRX = 2
TCKE_PULSE = 10
TCKE = 10
SEQ_IDLE = 7
TCKE_PULSE_MSB = 0
SEQ_IDLE_SS = 8
####SEQ_RAS_TIMING####
TRCDW = 13
TRCDWA = 13
TRCDR = 18
TRCDRA = 18
TRRD = 5
TRC = 48
####SEQ_CAS_TIMING####
TNOPW = 0
TNOPR = 0
TR2W = 23
TCCDL = 2
TR2R = 5
TW2R = 9
TCL = 16
####SEQ_MISC_TIMING####
TRP_WRA = 45
TRP_RDA = 35
TRP = 18
TRFC = 62
####SEQ_MISC_TIMING2####
PA2RDATA = 0
PA2WDATA = 0
TFAW = 8
TCRCRL = 3
TCRCWL = 3
TFAW32 = 6
TWDATATR = 0
####ARB_DRAM_TIMING####
ACTRD = 25
ACTWR = 20
RASMACTRD = 38
RASMACTWR = 43
####ARB_DRAM_TIMING2####
RAS2RAS = 81
RP = 46
WRPLUSRP = 62
BUS_TURN = 19
####MC_SEQ_MISC####
MC_SEQ_MISC1 = 0x20140F64
MC_SEQ_MISC3 = 0xA78089BA
MC_SEQ_MISC8 = 0xC0070000

Did you use win or linux? Did you compiled your ohgodadecode ? If not which binary are you using?

win10, not compiled , I have used this your ohgodadecode https://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx/2610#post_26047123

That OhGodADecode binary is compiled to support timing strap that comes from RX series (Polaris) GPU

OK, and now how to use it for the R9 series GPU, can you write the procedure.

Multiple solutions:
- Use this tool instead
- Compile OhGodADecode with R9 strap support (add -DSTRAP_R9=1 when you compile it)
- Wait for me to go home and I'll compile it for youy

I'll wait for you , thank U.

You mention "OhGodAPet" in the OP. I could be wrong, but believe you might mean @wolf9466

I copied the "OhGodACompany - OhGodAGirl & OhGodAPet" from the source, if @wolf9466 is OhGodAPet i'll change the first post @OhGodAGirl can you confirm?

That is me - I go by OhGodAPet a lot now.