[Official] EVGA Classified & K|NGP|N Owner's Club - Page 2141 - Overclock.net - An Overclocking Community
Forum Jump: 

[Official] EVGA Classified & K|NGP|N Owner's Club

Reply
 
Thread Tools
post #21401 of 21426 (permalink) Old 10-13-2018, 09:18 AM
LN2 addict
 
bigblock990's Avatar
 
Join Date: Jul 2013
Location: Minnesota
Posts: 1,529
Rep: 70 (Unique: 42)
Quote: Originally Posted by metzroth View Post
Ok, so I figured this out. The LN2 bios has a core clock, boost clock, and boost clock within temperature limitation.... That last one is set at 1202 as the starting point. Which makes 1350 in Valley or anything I do since I'm watercooled. The sensor on GPU-Z doesn't monitor boost clock, so it never sees it correctly and the main page on GPU-Z only reports the core clock and boost clock, not the boost clock within temperature limit. So that's the answer. I'm running at 1350 stable. Happy camper :-) I must have a decent chip since I can push it to 1375 and still be stable on stock voltage.
GPU core clock as reported on gpuz sensor tab is the actual gpu frequency. So per the images you added in your first post, your gpu is running 1154mhz


bigblock990 is offline  
Sponsored Links
Advertisement
 
post #21402 of 21426 (permalink) Old 12-28-2018, 02:41 PM
New to Overclock.net
 
Join Date: Feb 2014
Posts: 4,510
Rep: 131 (Unique: 92)
This is my setup and my best OC on air with GeForce GTX 1080 Ti Kingpin. It's a fully 100% stable 24/7 crash-free gaming overclock. GPU goes up to 2025Mhz as advertised, but downclocks itself to about 1950Mhz at times, depending on temperature and game GPU utilization:

https://drive.google.com/file/d/15SU...ew?usp=sharing

https://drive.google.com/file/d/1OoZ...ew?usp=sharing

Questions:
1. Does OC seem right to you?
2. When it comes to MSI AB "Compatibility Properties" settings/options, am I using correct ones? Kingpin edition uses its own custom VRM's, sensors, BIOS, etc., therefore I assume generic settings would not work correctly. When it comes to OC, there doesn't seem to be a difference between:
a. "User mode" and "Kernel mode" options for "Enable low-level hardware access interface"
b. "Reference", "Standard MSI", "Extended MSI" and "Third party" options for ""Unlock voltage control"
c. "Force contrast voltage" option enabling and disabling

I neither like nor use original Precision X or the new one because both are very cluttered, bloated, stuttery, cause pauses when applying settings and do not help with OC in any way... I just don't get how EVGA could take snappy and responsive MSI AB as a base and degrade it that far.., but back on topic - this thread is about getting the right MSI AB settings for EVGA GTX 1080 Ti Kingpin.
MonarchX is offline  
post #21403 of 21426 (permalink) Old 01-19-2019, 08:59 AM
New to Overclock.net
 
davidm71's Avatar
 
Join Date: Apr 2009
Posts: 1,210
Rep: 22 (Unique: 18)
Hi,

I know I'm late to the game but finally water cooled my old 980 Ti KPEs. Had the blocks sitting in a draw for three years too afraid of taking the risk watercooling until now. Anyhow was wondering if any past 980 ti KPE owners mind sharing their overclock settings for that card. My Asic scores are 75/76.5 depending on card and load temps under 3dmark Stress testing module maxes out at 39 degrees on hottest gpu. I have also enabled both 25mv dip switches on back of card though while stress testing Afterburner is saying each card is at 1430 mhz at 1.20 -1.21 volts. So going to raise the frequency now without touching vcore through Afterburner. Read I could go up to 1.3 v max if I had to but not sure about that..

Any help be appreciated..

Thanks

Save with EVGA. Associate code: K8XL098LGS5O4WZ
Z390 Master
(8 items)
CPU
9900K
Motherboard
Gigabyte Z390 Master
GPU
EVGA 1080 FTW2 SLI
RAM
Gskill F4-3600C15D-16GTZ
Hard Drive
Samsung 970 PRO
Power Supply
Corsair HX1200i
Cooling
Custom water loop
Operating System
Windows 10 64
▲ hide details ▲
davidm71 is offline  
Sponsored Links
Advertisement
 
post #21404 of 21426 (permalink) Old 01-21-2019, 07:01 AM
New to Overclock.net
 
fpisti35's Avatar
 
Join Date: May 2016
Posts: 2
Rep: 0
Hi mates,

I bought a second hand EVGA GTX 980 K|NGP|N Classified video card but it has same fan issue. The fans are always off but if a set control to manual on EVGA Precision nothing happen until PC switch off. After the PC restart fans works on constant rpm but automatic control doesn't work at all. I stressed GPU to 90 Celsius but still nothing, always off.

I didn't check BIOS yet but my plan to change back original factory BIOS.

I spent few hours but didn't find an original BIOS just overclocked ones.

If anyone has a saved factory BIOS please send it to me?

Thanks
Istvan
fpisti35 is offline  
post #21405 of 21426 (permalink) Old 01-21-2019, 07:06 AM
Overclocker in training
 
ThrashZone's Avatar
 
Join Date: Apr 2017
Location: Texas
Posts: 12,153
Rep: 181 (Unique: 108)
Hi,
You can probably message evga support for original vbios.

CPU
i9-9940x With Optimus Foundation copper-plexi and Heatkiller VRM copper-plexi water block
Motherboard
ASUS x299 Rampage VI Apex
GPU
Titan Xp with copper-plexi Water Block
RAM
Trident Z 3600C16 4x8gb's b-die default timings 16-16-16-36 F4-3600C16Q-32GTZKK
Hard Drive
Samsung 970 Evo Plus 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Optical Drive
LG Blu-Ray WH16NS40
Power Supply
evga 1200-P2
Cooling
D5 pump reservoir combo/ GTX280/ VRM block/ GTX280/ D5 top/ CPU block/ GPU block/ Mora 360/ repeat.
Cooling
MO-RA3 360 PRO stainless steel (25022)
Case
corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 pro & 10 pro Win-7 Primary os.
Monitor
ASUS VG248QE 24" 144Hz
Keyboard
Logitech G910 Orion spectrum
Mouse
Redragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
Other
5.0/https://valid.x86.fr/ez2ifr
CPU
10900k batch # X016E724
Motherboard
z490 ASUS Maximus XII Apex
GPU
EVGA 1080ti FTW3
RAM
Trident-Z 3600c16 4x8gb kit 16-16-16-36 F4-3600C16Q-32GTZSW
Hard Drive
Samsung 970 evo 500gb
Power Supply
EVGA 1000P2
Case
Corsair 450D
CPU
i7-5930k with Heatkiller IV Pro Plexi-Copper and koolance vrm water blocks
Motherboard
X99 Sabertooth
GPU
EVGA 1080ti FTW3 with Water block
RAM
Trident-Z 3200C14 4x8gb's b-die default timings 14-14-14-34
Hard Drive
Samsung 970 Evo 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Optical Drive
LG Blu-Ray WH16NS40
Power Supply
EVGA 1000-P2
Cooling
D5 reservior combo/ 240GTX/ Koolance VRM block/ 240GTX/ D5 Top/ CPU block/ Gpu block/ Mora 360LT/ back to reservoir
Cooling
Mora 360LT black 25000
Case
Corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 and 10 pro Win-7 Primary os.
Monitor
AOC G2460PG 24"G-Sync 144Hz
Keyboard
Logitech G710+
Mouse
Red Dragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
▲ hide details ▲
ThrashZone is offline  
post #21406 of 21426 (permalink) Old 01-21-2019, 07:32 AM
New to Overclock.net
 
fpisti35's Avatar
 
Join Date: May 2016
Posts: 2
Rep: 0
Thanks for your respond. I though this forum much faster like a customer service but if nobody can help I will ask them.

I have found two unverified vbios for my card just I'm not sure they are original one or already overclocked. But will check tomorrow when work from home.
fpisti35 is offline  
post #21407 of 21426 (permalink) Old 01-21-2019, 07:54 AM
Overclocker in training
 
ThrashZone's Avatar
 
Join Date: Apr 2017
Location: Texas
Posts: 12,153
Rep: 181 (Unique: 108)
Hi,
You can also ask on the evga community too there are some good people there.

CPU
i9-9940x With Optimus Foundation copper-plexi and Heatkiller VRM copper-plexi water block
Motherboard
ASUS x299 Rampage VI Apex
GPU
Titan Xp with copper-plexi Water Block
RAM
Trident Z 3600C16 4x8gb's b-die default timings 16-16-16-36 F4-3600C16Q-32GTZKK
Hard Drive
Samsung 970 Evo Plus 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Optical Drive
LG Blu-Ray WH16NS40
Power Supply
evga 1200-P2
Cooling
D5 pump reservoir combo/ GTX280/ VRM block/ GTX280/ D5 top/ CPU block/ GPU block/ Mora 360/ repeat.
Cooling
MO-RA3 360 PRO stainless steel (25022)
Case
corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 pro & 10 pro Win-7 Primary os.
Monitor
ASUS VG248QE 24" 144Hz
Keyboard
Logitech G910 Orion spectrum
Mouse
Redragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
Other
5.0/https://valid.x86.fr/ez2ifr
CPU
10900k batch # X016E724
Motherboard
z490 ASUS Maximus XII Apex
GPU
EVGA 1080ti FTW3
RAM
Trident-Z 3600c16 4x8gb kit 16-16-16-36 F4-3600C16Q-32GTZSW
Hard Drive
Samsung 970 evo 500gb
Power Supply
EVGA 1000P2
Case
Corsair 450D
CPU
i7-5930k with Heatkiller IV Pro Plexi-Copper and koolance vrm water blocks
Motherboard
X99 Sabertooth
GPU
EVGA 1080ti FTW3 with Water block
RAM
Trident-Z 3200C14 4x8gb's b-die default timings 14-14-14-34
Hard Drive
Samsung 970 Evo 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Optical Drive
LG Blu-Ray WH16NS40
Power Supply
EVGA 1000-P2
Cooling
D5 reservior combo/ 240GTX/ Koolance VRM block/ 240GTX/ D5 Top/ CPU block/ Gpu block/ Mora 360LT/ back to reservoir
Cooling
Mora 360LT black 25000
Case
Corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 and 10 pro Win-7 Primary os.
Monitor
AOC G2460PG 24"G-Sync 144Hz
Keyboard
Logitech G710+
Mouse
Red Dragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
▲ hide details ▲
ThrashZone is offline  
post #21408 of 21426 (permalink) Old 01-23-2019, 05:40 AM
New to Overclock.net
 
davidm71's Avatar
 
Join Date: Apr 2009
Posts: 1,210
Rep: 22 (Unique: 18)
Hi,

Any of you guys familiar with the XOC bios for the 980 Ti KPE? It has a bios version number that is one step newer than the other bios versions. XXXXXX.D0 vs XXXXXX.90.

Thanks

Save with EVGA. Associate code: K8XL098LGS5O4WZ
Z390 Master
(8 items)
CPU
9900K
Motherboard
Gigabyte Z390 Master
GPU
EVGA 1080 FTW2 SLI
RAM
Gskill F4-3600C15D-16GTZ
Hard Drive
Samsung 970 PRO
Power Supply
Corsair HX1200i
Cooling
Custom water loop
Operating System
Windows 10 64
▲ hide details ▲
davidm71 is offline  
post #21409 of 21426 (permalink) Old 01-26-2019, 05:52 PM
New to Overclock.net
 
H3avyweight's Avatar
 
Join Date: Jan 2019
Location: MG, Brazil
Posts: 1
Rep: 0
I have a GTX 980 non-ti Kingpin and the Nameplate led in blue color got weak, almost erased.
The red and green are already normal. In other sectors of the gpu the blue Led is also normal.

  • GPU: EVGA GTX 980 K|NGP|N | MB: ASUS Z270G Strix | RAM: 8GB 2400MHZ | CPU: i7-6700K + HYPER T4 | PSU: EVGA NEX750G | Phone: S7 EDGE 128GB
H3avyweight is offline  
post #21410 of 21426 (permalink) Old 03-01-2019, 02:35 PM
New to Overclock.net
 
davidm71's Avatar
 
Join Date: Apr 2009
Posts: 1,210
Rep: 22 (Unique: 18)
Bit the dust

Looks like one of my 980 ti's bit the dust last night and wouldn't post a picture to the screen. I mean I could tell Windows was loading but got no picture.
The motherboard would beep even at post with code D6 which meant no console output. Was weird because I always had trouble syncing the screen via
displayport to the video card but now not even hdmi or dvi port works. Wonder what went wrong. Had both cards water cooled and temps were good.
Overclocked to 1506/8000 mhz and everything seemed stable. No instability while gaming. Even was playing Wolfenstein an hour earlier before it went
to hell and no problems. At least if I unseat the primary card from the PCI-E slot I can get into Windows from the second video card.

Guess I need to rethink my cooling and video card setup now.

This sucks.

Thanks

Save with EVGA. Associate code: K8XL098LGS5O4WZ
Z390 Master
(8 items)
CPU
9900K
Motherboard
Gigabyte Z390 Master
GPU
EVGA 1080 FTW2 SLI
RAM
Gskill F4-3600C15D-16GTZ
Hard Drive
Samsung 970 PRO
Power Supply
Corsair HX1200i
Cooling
Custom water loop
Operating System
Windows 10 64
▲ hide details ▲
davidm71 is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off