[Official] EVGA Classified & K|NGP|N Owner's Club - Overclock.net - An Overclocking Community

Forum Jump: 

[Official] EVGA Classified & K|NGP|N Owner's Club

Reply
 
Thread Tools
post #1 of 21414 (permalink) Old 07-20-2013, 04:44 PM - Thread Starter
jonnyblaze
 
strong island 1's Avatar
 
Join Date: Jun 2012
Posts: 4,322
Rep: 134 (Unique: 88)
WELCOME TO THE CLASSIFIED OWNER'S CLUB

NOW FEATURING THE EVGA 980 TI CLASSIFIED K|NGP|N EDITION!



980 TI K|NGP|N CLASSIFIED TOOLS AND BIOS SECTION

COMING SOON!!!!!




980 TI CLASSIFIED TOOLS AND BIOS SECTION

Clasified Software Voltage Tool - Classified_v2.1.2.zip 852k .zip file

OC Bios - GTX980Ti_ClassyOC.zip 152k .zip file

EVBOT Firmware - vga4p56.zip 848k .zip file

Flash Tool - CNVFLASH.zip 1696k .zip file

(Flash tool. Please use this nvflash only in windows 64/32(depending on OS)(shift + right click in folder window after unpack and select open command window here and type nvflash 980kp_xoc6C.rom then y then YES). Always wise to uninstall your cards driver fist before flashing.)


980 K|INGPIN CLASSIFIED TOOLS AND BIOS SECTION 980 K|NGPIN CLASSIFIED SECTION (Click to show)
EVGA 980 CLASSIFIED K|NGP|N EDITION TOOLS

XOC BIOS POSTED BY K|NGP|N
kp980x.zip 137k .zip file

EVBOT FIRMWARE
980p53.zip 846k .zip file
(instructions are at the bottom of this page for flashing your evbot)

NVFlash for 980 K|NGP|N Classified
NVFLASH.zip 755k .zip file

Classy Software Voltage Tool (new version compatible with 980 kpe)
Classified_v2.1.0.zip 851k .zip file







980 CLASSIFIED TOOLS AND BIOS SECTION Warning: Spoiler! (Click to show)
980 Classified Tools and Bios's

New Classy Voltage Tool for 980 Classified -

Classified_v2.0.5.0.zip 845k .zip file

980 Classified XOC bios -

ClassyX.zip 137k .zip file

980 Classified EVBOT Software -

EVBot_P37.zip 545k .zip file


EVGA 780 TI KINGPIN CLASSIFIED SECTION -



EVGA 780 TI Classified Kingpin Edition Production Card Photos!

More Photos (Click to show)






NEW & EXCITING FEATURES FOUND ON THE 780 TI CLASSIFIED KINGPIN EDITION!!!!!


The Kingpin Edition Features 4 new switches found near the PCIE Bracket and near the topside of the card.

There are 4 additional switches on backside of card, the functions are as follows:



Switches near card topside

1. Disable GPU power protection (if toggled to OFF position)

2. Disable Memory power protection (if toggled to OFF position)



Switches near PCI-E bracket

1. Increase GPU voltage +25mV

2. Increase GPU voltage another +25mV

(If both switches enabled it will increase +50mV, default position is one switch enabled)
Exclusive Pictures of New Switches! (Click to show)



Engineered to Overclock

The ultimate GeForce GTX 780 Ti has arrived. Introducing the EVGA GeForce GTX 780 Ti Classified K|NGP|N Edition. This card is the final answer in the search for the greatest overclocking graphics card on the planet.

This card does not hold back, with up to 450W of dedicated GPU power, enhanced PLL circuitry, improved GPU power plane, 10CM fans, included backplate, preinstalled dedicated PWM baseplate, voltage regulation enhancements and more. As you can see, there is a reason why this card is named after the world’s Top Overclocker.

Extreme overclockers Vince “K|NGP|N” Lucido and Illya “TiN” Tsemenko demand the best when it comes to performance and overclocking, so they set out to co-design this product along with EVGA, and geared it for the ultimate overclocker.

“In order to break world records these days you need some serious hardware,” said Vince “K|NGP|N” Lucido. “This card was engineered to serve one purpose… be the world’s best overclocking graphics card. Expect GPU clockspeeds at over 1.85GHz with extreme cooling.”

“With the EVGA GeForce GTX 780 Ti Classified K|NGP|N Edition graphics card, we focused on the basic demands that are needed when doing extreme overclocking,” said Illya “TiN” Tsemenko. "Capable hardware design and heavy power delivery capacity is key for performance dominance and the ultimate gaming experience. So too is a unique power convertor able to provide over 450W of clean voltage for every kind of overclocking!"


HERE IS AN EXCLUSIVE PHOTO OF THE VRM SECTION OF THE KINGPIN EDITION CARD POSTED FOR US BY JACOB.





KINGPIN EDITION OVERCLOCK GUIDE!
OC_Guide.pdf 430k .pdf file




KINGPIN EDITION EVBOT TOOLS AND BIOS

Kingpin Edition Bios, Custom EVBOT Firmware and nvflash
KINGPIN EDITION TOOLS! (Click to show)
3888KPTI.zip 131k .zip file
(3888KPTI.zip bios is the latest revision with looser timings for the memory. It also fixes a bug with evbot not being able to flash from card and also a bug with voltage tuning.)

KINGPINEDITIONBIOS.zip 131k .zip file
nvflash.zip 446k .zip file
CWSDPMI.zip 13k .zip file

Place nvflash, cwsdpmi, and bios image to bootable thumb drive and flash this bios in DOS to the LN2 switch on the card, be sure to power off once after flash and let the card re-initialize.
Flash Command:
nvflash -4 -5 -6 XOCKPti.com
When promted type in YES or y accordingly.
Kingpin Edition Bios Disclaimer (Click to show)
Kingpin Bios Disclaimer - This bios will ONLY work on KPE card, so don't bork your regular classified by trying to flash them to it . The cards are very different. Don't forget to use really good aircooling on the pwm plate when pushing it over air/water cooling clocks and volts, it will get hot. Enjoy the card, a lot of testing and work went into it

Kingpin Edition EVBOT Firmware (also works with the 780 ti classy)

Plug evbot into card turn on and flash this firmware in windows, follow any instructions given.
(please see below evbot flash instructions for gpu use only)

780i31.zip 212k .zip file


BEST WAY TO GET THE MOST OUT OF YOUR KINGPIN EDITION. LINKS TO TEK-9 FAT AND SLIM POTS.
CREATOR: gd-jpeg v1.0 (using IJG JPEG v62), quality = 85


http://kingpincooling.com/tek-9-fat-6-0-gpu-unit/

CREATOR: gd-jpeg v1.0 (using IJG JPEG v62), quality = 85


http://kingpincooling.com/tek-9-slim-rev-7/




To get added to the owner's list above please post a gpuz validation link in this thread and I will update the list. Thank you.
OFFICIAL EVGA CLASSIFIED OWNER'S CLUB SIGNATURE
Code:
[CENTER]:h34r-smi [URL=https://www.overclock.net/t/1411500/official-evga-classified-owners-club][B][SIZE=3]EVGA CLASSIFIED & K|NGP|N OWNER'S CLUB[/SIZE][/B][/URL] :h34r-smi[/CENTER]





EVGA 780 TI CLASSIFIED SECTION
http://www.evga.com/Products/Product.aspx?pn=03G-P4-2888-KR


EVGA 780 TI CLASSIFIED TOOLS AND BIOS SECTION

NEW UPDATED CLASSIFIED SOFTWARE VOLTAGE CONTROLLER WITH PWM CONTROL!
(New version allows higher voltage and pwm control. This is latest version.)
Classified_v2.0.4.3.zip 203k .zip file


EVGA 780 TI CLASSIFIED BIOS'S


EVGA 780 Ti Classified skyn3t rev.1

skyn3trev.1bios.zip 271k .zip file

EVGA 780 Ti Classified ftw2002 bios

FTW_2002.zip 134k .zip file

EVGA 780 Ti Classified EVGA bios

Xti.zip 134k .zip file

EVGA 780 Ti Classified skyn3t bios rev.2 (evga official fix bios rev.)

skyn3trev.2bios.zip 271k .zip file

WATER BLOCKS AVAILABLE FOR CLASSIFIED VERSIONS!

EVGA HYDROCOPPER WATER BLOCK - FITS THE 780 CLASSIFIED AND 780 TI CLASSIFIED.



http://www.evga.com/Products/Product.aspx?pn=400-CU-G780-B2

EK CLASSY WATER BLOCKS IN PLEXI AND ACETAL VERSIONS. EK WILL HAVE AN UPDATED BACKPLATE 2.0 FOR KINGPIN EDITION. EK CLASSY BLOCKS FIT THE 780 CLASSIFIED, 780 TI CLASSIFIED AND KINGPIN EDITION.

CREATOR: gd-jpeg v1.0 (using IJG JPEG v62), default quality
http://www.ekwb.com/shop/blocks/vga-blocks/fc-geforce/geforce-titan-series/ek-fc780-gtx-classy-nickel.html

CREATOR: gd-jpeg v1.0 (using IJG JPEG v62), default quality
http://www.ekwb.com/shop/blocks/vga-blocks/fc-geforce/geforce-titan-series/ek-fc780-gtx-classy-acetal-nickel.html




EVGA 780 CLASSIFIED SECTION
780 CLASSIFIED BIOS'S! (Click to show)
GTX 780 Classified Bios's (Stock bios's from first batch of cards) -

Stockbios.zip 131k .zip file LN2.zip 131k .zip file

skyn3t helped us out a lot and made custom bios's for us Classified Owner's. I flashed and tested them myself. Big thanks to skyn3t!!!!!!

EVGA 780 Classified skyn3t rev.1 bios

sky-LN2.zip 132k .zip file

EVGA 780 Classified skyn3t rev.2 bios

sky-classy-vBios-rev2.zip 265k .zip file

EVGA 780 Classified skyn3t rev.3 bios

vBios-v380.80.21.01.80-LN2.zip 131k .zip file



Revision 4 skyn3t bios 780 Classified "NO Ti"
skyn3t-Classy-vBios-rev4.zip 135k .zip file
[*] skyn3t-Classy-vBios-rev4
[*] Version 80.80.31.01.80 B1 chip
[*] Base core clock 1110.5 Mhz
[*] Boost disable
[*] 3d voltage adjustable
[*] 1.212v Unlocked
[*] Fan Idle 20%
[*] Fan bumped to 100%
[*] Default power target 100% 600w by 150% slide 900w


best
skyn3t

[Official] EVGA Classified Owner's Club





GTX 780, 780 TI, 770, 680 Classified Software Overvoltage tool -

(The overvoltage tool allows 780 Classified's 1.50v and 780 TI Classified's up to about 1.6v)
Classified_v2.0.4.3.zip 203k .zip file


EVBOT GPU ONLY FLASH TOOLS AND INSTRUCTIONS (Click to show)
EVGA EVBOT Manual & GPU Flash Tool & Instructions

Note-EVGA updated EVBOT firmware to p27. I have included both files below. Either one will work with my instructions.

EVBot_P27.zip 541k .zip file

How to flash EVBOT for GPU use only for 680 & 780 Classified's -

Windows Installation

•Download the .zip file below:


EVBot_P26.zip 541k .zip file



•Connect the EVBot cable to the MB port located on the EVBot device.
•Connect the other end of the EVBot cable to your graphics card.
•Extract contents of above .zip file and run EVBotFlashTool.exe
•Select the bundled .hex file for flashing.
•Hold down the EVBot POWER button for 7 seconds until you see the EVBot screen display FLASH MODE.
•Click OK in EVBot Flash Tool to being the flashing process.
•After flash is complete, unplug EVBot, then plug it back in to any EVBot port.
Warning:
**Do not restart or interrupt your PC while the flash is ongoing


EVBOT Manual -

EVBOT Manual.zip 1379k .zip file


NVFLASH TOOLS AND INSTRUCTIONS (Click to show)
NV Flash Tools for Windows -

nvflash_windows_5.134.0.1.zip 403k .zip file

Instructions for flashing bios -

Unpack the zip file above and the bios you want into a folder on you c drive called classified. Then while in that folder right click in an empty space and select "open command window here" then procedd with the unlock command below and the rest of the commands as needed.

nvflash --protectoff

nvflash -4 -5 -6 biosname.rom

You might have to hit "y" twice. Once it says completed reboot. You might also have to reinstall drivers depending on bios.

Flashing with 2 cards installed -

nvflash -i0 -4 -5 -6 biosname.rom - (This is for card #1)

nvflash -i1 -4 -5 -6 biosname.rom - (This is for card #2)




Made Official by ENTERPRISE 27.7.13
Attached Files
File Type: zip Stockbios.zip (130.7 KB, 627 views)
File Type: zip LN2.zip (130.7 KB, 771 views)
File Type: zip EVBot_P26.zip (541.1 KB, 152 views)
File Type: zip EVBOT Manual.zip (1.35 MB, 283 views)
File Type: zip nvflash_windows_5.134.0.1.zip (403.5 KB, 2447 views)
File Type: zip EVBot_P27.zip (541.2 KB, 350 views)
File Type: zip sky-LN2.zip (131.7 KB, 787 views)
File Type: zip sky-classy-vBios-rev2.zip (265.2 KB, 1103 views)
File Type: zip vBios-v380.80.21.01.80-LN2.zip (130.9 KB, 1384 views)
File Type: zip KINGPINEDITIONBIOS.zip (130.8 KB, 493 views)
File Type: zip nvflash.zip (446.1 KB, 317 views)
File Type: zip CWSDPMI.zip (13.0 KB, 272 views)
File Type: zip 780i31.zip (211.6 KB, 130 views)
File Type: zip FTW_2002.zip (134.5 KB, 730 views)
File Type: zip Xti.zip (134.4 KB, 1007 views)
File Type: pdf OC_Guide.pdf (429.6 KB, 1113 views)
File Type: zip skyn3trev.1bios.zip (270.6 KB, 1054 views)
File Type: zip skyn3trev.2bios.zip (270.6 KB, 2757 views)
File Type: zip 3888KPTI.zip (130.8 KB, 373 views)
File Type: zip Classified_v2.0.4.3.zip (203.5 KB, 3775 views)
File Type: zip skyn3t-Classy-vBios-rev4.zip (134.8 KB, 1327 views)
File Type: zip Classified_v2.0.5.0.zip (845.2 KB, 682 views)
File Type: zip ClassyX.zip (137.3 KB, 413 views)
File Type: zip EVBot_P37.zip (545.3 KB, 152 views)
File Type: zip kp980x.zip (136.7 KB, 439 views)
File Type: zip 980p53.zip (846.0 KB, 126 views)
File Type: zip NVFLASH.zip (755.1 KB, 287 views)
File Type: zip Classified_v2.1.0.zip (851.4 KB, 653 views)
File Type: zip GTX980Ti_ClassyOC.zip (152.1 KB, 1493 views)
File Type: zip vga4p56.zip (847.8 KB, 395 views)
File Type: zip CNVFLASH.zip (1.66 MB, 873 views)
File Type: zip Classified_v2.1.2.zip (851.7 KB, 1439 views)

<div class="post-sig post-sig-limit shazam usersig-click"><div class="reparse-sig-lineheight"><div style="text-align:center;"><img alt="ph34r-smiley.gif" src="http://files.overclock.net/images/smilies/ph34r-smiley.gif"><a href="https://www.overclock.net/t/1411500/official-evga-classified-owners-club"><b><span style="font-size:12px;">EVGA CLASSIFIED &amp; K|NGP|N OWNER'S CLUB</span></b></a><span> </span><img alt="ph34r-smiley.gif" src="http://files.overclock.net/images/smilies/ph34r-smiley.gif"></div></div></div>
strong island 1 is offline  
Sponsored Links
Advertisement
 
post #2 of 21414 (permalink) Old 07-20-2013, 04:47 PM
Retired Staff
 
FtW 420's Avatar
 
Join Date: May 2009
Location: near Vancouver, BC
Posts: 10,558
Rep: 213 (Unique: 128)
Nice! Highest valley score with a 780 to date, & ahead of quite a few Titans!

____________________________

____________________________
.:|Official|Volt|Mod|Squad|Member|:.
post-flame-small.gifOCN bench teampost-flame-small.gif


FtW 420 is offline  
post #3 of 21414 (permalink) Old 07-20-2013, 04:49 PM - Thread Starter
jonnyblaze
 
strong island 1's Avatar
 
Join Date: Jun 2012
Posts: 4,322
Rep: 134 (Unique: 88)
I can't edit my posts anymore. I someone could make a modded bios that would be amazing. I will upload both bios's here. I am still not artifacting or crashing at 1306mhz 7400mhz so I know I could go alot higher with a custom bios.

LN2.zip 131k .zip file

Classified.zip 182k .zip file
Attached Files
File Type: zip LN2.zip (130.7 KB, 302 views)
File Type: zip Classified.zip (182.2 KB, 321 views)

<div class="post-sig post-sig-limit shazam usersig-click"><div class="reparse-sig-lineheight"><div style="text-align:center;"><img alt="ph34r-smiley.gif" src="http://files.overclock.net/images/smilies/ph34r-smiley.gif"><a href="https://www.overclock.net/t/1411500/official-evga-classified-owners-club"><b><span style="font-size:12px;">EVGA CLASSIFIED &amp; K|NGP|N OWNER'S CLUB</span></b></a><span> </span><img alt="ph34r-smiley.gif" src="http://files.overclock.net/images/smilies/ph34r-smiley.gif"></div></div></div>
strong island 1 is offline  
Sponsored Links
Advertisement
 
post #4 of 21414 (permalink) Old 07-20-2013, 04:52 PM - Thread Starter
jonnyblaze
 
strong island 1's Avatar
 
Join Date: Jun 2012
Posts: 4,322
Rep: 134 (Unique: 88)
Quote:
Originally Posted by FtW 420 View Post

Nice! Highest valley score with a 780 to date, & ahead of quite a few Titans!

I know I could go much higher but I am hitting the 115% power limit. I haven't throttled yet though. I can still raise the voltage another .05.

I need a custom bios so bad. Could I edit the bios with Kepler Bios Tweaker. I will try.

Ya I beat one of my old titans already. I still have another card to test.

<div class="post-sig post-sig-limit shazam usersig-click"><div class="reparse-sig-lineheight"><div style="text-align:center;"><img alt="ph34r-smiley.gif" src="http://files.overclock.net/images/smilies/ph34r-smiley.gif"><a href="https://www.overclock.net/t/1411500/official-evga-classified-owners-club"><b><span style="font-size:12px;">EVGA CLASSIFIED &amp; K|NGP|N OWNER'S CLUB</span></b></a><span> </span><img alt="ph34r-smiley.gif" src="http://files.overclock.net/images/smilies/ph34r-smiley.gif"></div></div></div>
strong island 1 is offline  
post #5 of 21414 (permalink) Old 07-20-2013, 05:39 PM
New to Overclock.net
 
Join Date: Jul 2013
Location: Purgatory
Posts: 2,280
Rep: 125 (Unique: 82)
would u use evbot? i had heard that voltage control should get u to 1.35v, but looks like not..hmmmm redface.gif

Simplicity
provost is offline  
post #6 of 21414 (permalink) Old 07-20-2013, 05:55 PM
New to Overclock.net
 
pharma57's Avatar
 
Join Date: Jul 2013
Posts: 436
Rep: 12 (Unique: 9)
EvBot would be for greater than 1.35v. He should be able to reach 1.35v once he increases the Power Target to say 200%, like in KingPin's demo.

Great score!!thumb.gif
pharma57 is offline  
post #7 of 21414 (permalink) Old 07-20-2013, 06:00 PM
New to Overclock.net
 
USFORCES's Avatar
 
Join Date: Jul 2006
Location: IN, Abox
Posts: 8,505
Rep: 554 (Unique: 419)
Nice and water would be the way to go with these cards..
USFORCES is offline  
post #8 of 21414 (permalink) Old 07-20-2013, 06:01 PM
New to Overclock.net
 
szeged's Avatar
 
Join Date: Nov 2012
Posts: 17,315
Rep: 737 (Unique: 415)
Quote:
Originally Posted by USFORCES View Post

Nice and water would be the way to go with these cards..

hydrocopper blocks need to come out asap tongue.gif
szeged is offline  
post #9 of 21414 (permalink) Old 07-20-2013, 11:55 PM - Thread Starter
jonnyblaze
 
strong island 1's Avatar
 
Join Date: Jun 2012
Posts: 4,322
Rep: 134 (Unique: 88)
Quote:
Originally Posted by provost View Post

would u use evbot? i had heard that voltage control should get u to 1.35v, but looks like not..hmmmm redface.gif

I can go to 1.35v I just haven't yet becuase I am already reaching my power limit. I need a custom bios.

<div class="post-sig post-sig-limit shazam usersig-click"><div class="reparse-sig-lineheight"><div style="text-align:center;"><img alt="ph34r-smiley.gif" src="http://files.overclock.net/images/smilies/ph34r-smiley.gif"><a href="https://www.overclock.net/t/1411500/official-evga-classified-owners-club"><b><span style="font-size:12px;">EVGA CLASSIFIED &amp; K|NGP|N OWNER'S CLUB</span></b></a><span> </span><img alt="ph34r-smiley.gif" src="http://files.overclock.net/images/smilies/ph34r-smiley.gif"></div></div></div>
strong island 1 is offline  
post #10 of 21414 (permalink) Old 07-21-2013, 12:06 AM - Thread Starter
jonnyblaze
 
strong island 1's Avatar
 
Join Date: Jun 2012
Posts: 4,322
Rep: 134 (Unique: 88)
Quote:
Originally Posted by USFORCES View Post

Nice and water would be the way to go with these cards..

I know, could you imagine this card with a waterblock and a custom bios and the evbot. My evbot should be here Monday. Right now I am doing this on the stock bios and air and I haven't even maxed out the voltage tool. I think this card could reach some crazy speeds with a custom bios.

I tried editing the bios in KBT but it didn't work. Can anyone mod this bios for a higher power limit.

<div class="post-sig post-sig-limit shazam usersig-click"><div class="reparse-sig-lineheight"><div style="text-align:center;"><img alt="ph34r-smiley.gif" src="http://files.overclock.net/images/smilies/ph34r-smiley.gif"><a href="https://www.overclock.net/t/1411500/official-evga-classified-owners-club"><b><span style="font-size:12px;">EVGA CLASSIFIED &amp; K|NGP|N OWNER'S CLUB</span></b></a><span> </span><img alt="ph34r-smiley.gif" src="http://files.overclock.net/images/smilies/ph34r-smiley.gif"></div></div></div>
strong island 1 is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off