[UPDATED AB B18] Team Skyn3t's Unlocked NCP4206 Voltage / LLC mod tool - Overclock.net - An Overclocking Community

Forum Jump: 

[UPDATED AB B18] Team Skyn3t's Unlocked NCP4206 Voltage / LLC mod tool

Reply
 
Thread Tools
post #1 of 1362 (permalink) Old 09-07-2013, 04:26 PM - Thread Starter
New to Overclock.net
 
Join Date: Mar 2010
Location: The Sol system
Posts: 1,221
Rep: 95 (Unique: 72)
Team Skyn3t presents: Unlocked NCP4206 Voltage / LLC mod tool





TeamSkyn3t_ZawarudoABHack_B18.zip 56k .zip file
Version 4 is for use with Afterburner beta18

remove tick on "Enable low-level hardware access interface" in General properties to get voltage control working in beta 18 And set voltage control to MSI extended
Fix for applying Voltage (Click to show)
Quote:
Originally Posted by Agent-A01 View Post

Found a fix for voltage not working.. What i had to do was:
1. Load OC profile hit apply
2. Click the same profile to where i shows Apply as clickable.
3. Apply voltage in tool.
4. Click apply in AB.

The old steps doesn'tt work anymore for me, where you apply voltage, move any slider up and then back down and apply. But theres no way to save the voltage into a profile.

pre-requisites:

Run Afterburner & my program in admin mode. right click .exe>properties>compatibility>tick run as admin box

Afterburner 1.3v softmod & Afterburner Download

Step by step guide, LLC: (Click to show)

Ok, to begin with you should read everything on the program itself. There are some important points.
That a side let's crack on:

The two circles in the image below indicate whether or not your cards NCP4206 is at position 3 or 4 on the card.



An easy test to find out if your card is a 3 or a 4 is by clicking the check LLC status on the red and blue side.

Whichever side returns with:



Is the correct one. (If you have used my mod before it will return as 00.)

Simple click the Enable LLC mod on either the red or blue side (whichever one your card is)
And that's LLC enabled, simple eh?

You can test if it's worked by clicking check LLC status. It should return a 00 now.
Step by step guide, GPU Voltage Control: (Click to show)

Enter your voltage as a 4 digit number.



Remember that actual voltages are always 0.025v higher due
to the LLC mod being enabled. I've tried to get the numbers and voltages to match but the buck controller
simple doesn't have enough programmable steps for LLC.
Code:
1200 = 1225 which is 1.225v due to LLC
After you've clicked the apply button and you're sure your volts are correct head over to your Afterburner program:



Then all you need to do is move your power target down one then back up one to make the apply button click-able.
Then just click the apply button and monitor the change using Afterburners graphs to verify it's worked.

Before anyone asks, Memory voltage is still a long way off if even possible. At the moment it's not looking good.

Big thanks to Skyn3t, OccamRazor & everyone else for being total bros. Appreciated and this is for you guys.

Old Versions (Click to show)
ZawarudoABHackV2.zip 56k .zip file <- for use with Afterburner 14
ZawarudoABHackv3.zip 56k .zip file <- for use with Afterburner 15 & 16

-=]░▒▓███ [Official] NVIDIA GTX 780 Owner's Club ███▓▒░[=-
thumb.gifFully unlocked NCP4206 Voltage / LLC mod tool thumb.gif

Member of the dead OCN members club
I hide the treasure in the ... ahhhg...
Zawarudo is offline  
Sponsored Links
Advertisement
 
post #2 of 1362 (permalink) Old 09-07-2013, 05:21 PM
New to Overclock.net
 
skyn3t's Avatar
 
Join Date: Aug 2010
Location: Germantown MD
Posts: 6,659
Rep: 591 (Unique: 374)
Quote:
Originally Posted by Zawarudo View Post

Hi everyone. I'm kevans girlfriend fiona. Kevan passed away this morning and he said to tell you that he was proud of the pictures everyone took for him. I printed them all out and showed him them yesterday and he was completely overwhelmed by your love and support.

Just know that he held you all in the highest regards and he said he regrets not getting the ti to over volt properly (I assume that means something to you guys)

A truly beautiful light has gone out in the universe that can never be replaced. Most people didn't know that he privately funded 2 soup kitchens and every year bought thousands of pounds of Christmas presents for terminally ill kids. That was just the kind of sweet heart he was, he never expected anything in return for the things he did.

He was the absolute love of my life and I miss him so much already. He passed well with a smile on his face and was chuckling right to the end, not even cancer could keep him down.

I don't know what else to say..


Fiona.

I really don't know how to begin with this post and what to say exactly.
I lost my words
I feel bad
I can't think straight
I don't know what to do now
I wish I could do something revert his situation how I wish
I wish everything for his life
I wish he could be here among us
How I wish!!!!!

but one thing I do know.
Kevan was very brave and smart. he did a lot for us and never asked anything in return.
I know is hard to admit but today he went to a better place where no sickness exist or anything bad things exist.

sadly we could not get the Ti done 'as I bold his words above" he could not get it done in time. but now he will have all the time to over volt properly all the sky angels and how many he want in many different version those angles that will save many people life. He will going to continue his journey on the other side and keep look after us. I know it he will do it.

this is the only thing I could write here right now at this moment.
Kevan "zawarudo" one day we will have that drink. Today Me and Ed will silence.

9d0da236_luto.png









I'm the first lol , dang someone is skipping school for some hack tongue.gif

♦░▒▓█▓█ [Official] EVGA 780 Ti Classified k|ngp|n Owner's Club] █▓█▓▒░♦
♦░▒█▓▒░♦ [Official] NVIDIA GTX 780 Ti Owner's Club] ♦░▒█▓▒░♦
-=]░▒▓███ [Official] NVIDIA GTX 780 Owner's Club ███▓▒░[=-
█▓▒█▓♦ [Official] NVIDIA GTX 980 Owner's Club ♦█▓▒█▓
skyn3t is offline  
post #3 of 1362 (permalink) Old 09-07-2013, 05:33 PM
OccamRazor is offline  
Sponsored Links
Advertisement
 
post #4 of 1362 (permalink) Old 09-07-2013, 06:00 PM - Thread Starter
New to Overclock.net
 
Join Date: Mar 2010
Location: The Sol system
Posts: 1,221
Rep: 95 (Unique: 72)
Check your PMs gents. Very basic start but it's something to tinker with wink.gif

-=]░▒▓███ [Official] NVIDIA GTX 780 Owner's Club ███▓▒░[=-
thumb.gifFully unlocked NCP4206 Voltage / LLC mod tool thumb.gif

Member of the dead OCN members club
I hide the treasure in the ... ahhhg...
Zawarudo is offline  
post #5 of 1362 (permalink) Old 09-07-2013, 06:59 PM
New to Overclock.net
 
Lumme's Avatar
 
Join Date: Jul 2013
Posts: 30
Rep: 8 (Unique: 7)
Ehh.. fully unlocked would be 1,6v for NCP4206 or am I missing something here?
Lumme is offline  
post #6 of 1362 (permalink) Old 09-07-2013, 07:06 PM - Thread Starter
New to Overclock.net
 
Join Date: Mar 2010
Location: The Sol system
Posts: 1,221
Rep: 95 (Unique: 72)
Quote:
Originally Posted by Lumme View Post

Ehh.. fully unlocked would be 1,6v for NCP4206 or am I missing something here?

it is but I'm not about to destroy my card lol. 1.45v is the highest I'm willing to go and even that's too high.

-=]░▒▓███ [Official] NVIDIA GTX 780 Owner's Club ███▓▒░[=-
thumb.gifFully unlocked NCP4206 Voltage / LLC mod tool thumb.gif

Member of the dead OCN members club
I hide the treasure in the ... ahhhg...
Zawarudo is offline  
post #7 of 1362 (permalink) Old 09-07-2013, 07:22 PM
New to Overclock.net
 
Lumme's Avatar
 
Join Date: Jul 2013
Posts: 30
Rep: 8 (Unique: 7)
Ahh.. I C.

I'we kinda dropped the whole "be-carefull-you-might-blow-off-your-fingers..." ect. It's overclockers.net - I mean common ppl.
I saw, in another thread, that you are writhing a tool to make the mem hack a bit easier - looking forward to that hence mem hacks can be a bit of a hassle - specially when new versions of AB is out and all that.

Anyway, here its 4 in the morning and I'we been benching a bit myself, but cant seem to get past the 8 tongue.gif


Stay cool and have fun - cheers

br. Lumme
Lumme is offline  
post #8 of 1362 (permalink) Old 09-07-2013, 07:33 PM
New to Overclock.net
 
Akula's Avatar
 
Join Date: Feb 2012
Location: Adelaide, Australia
Posts: 124
Rep: 14 (Unique: 14)
Oh i would love to be part of this. redface.gif

Akula is offline  
post #9 of 1362 (permalink) Old 09-07-2013, 07:59 PM - Thread Starter
New to Overclock.net
 
Join Date: Mar 2010
Location: The Sol system
Posts: 1,221
Rep: 95 (Unique: 72)
Quote:
Originally Posted by Lumme View Post

Ahh.. I C.

I'we kinda dropped the whole "be-carefull-you-might-blow-off-your-fingers..." ect. It's overclockers.net - I mean common ppl.
I saw, in another thread, that you are writhing a tool to make the mem hack a bit easier - looking forward to that hence mem hacks can be a bit of a hassle - specially when new versions of AB is out and all that.

Anyway, here its 4 in the morning and I'we been benching a bit myself, but cant seem to get past the 8 tongue.gif


Stay cool and have fun - cheers

br. Lumme

Goodnight and have a good one, I'll PM you when I've got it all sorted. It's currently just bits of code and ideas and some super bodge job cheat engine stuff haha.

Quote:
Originally Posted by Akula View Post

Oh i would love to be part of this. redface.gif

Nothing really to test atm. The file I shared with the guys was crap in the end. A bit more work is needed, sit tight.

-=]░▒▓███ [Official] NVIDIA GTX 780 Owner's Club ███▓▒░[=-
thumb.gifFully unlocked NCP4206 Voltage / LLC mod tool thumb.gif

Member of the dead OCN members club
I hide the treasure in the ... ahhhg...
Zawarudo is offline  
post #10 of 1362 (permalink) Old 09-08-2013, 04:33 AM - Thread Starter
New to Overclock.net
 
Join Date: Mar 2010
Location: The Sol system
Posts: 1,221
Rep: 95 (Unique: 72)
Updated OP with a manual way of getting more juice until I finish the utility I'm making.

-=]░▒▓███ [Official] NVIDIA GTX 780 Owner's Club ███▓▒░[=-
thumb.gifFully unlocked NCP4206 Voltage / LLC mod tool thumb.gif

Member of the dead OCN members club
I hide the treasure in the ... ahhhg...
Zawarudo is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off