2160/16400 in the air where it is not even the limit of this GPU in these conditions.
Interestingly, even after the bios reflash and plays with other bioses, all sort settings and max TDP near still around 280W. I suspect three options:
1.Nuts ;-) from GALAX is the way the GPU designed that softs do not want to give the value well.
2.I have a bug with PT and grandpa doesn't want to get up
3.The problem with the good separation of the 12v line from the PSU, I will try diff.
The card is connected, of course, with separate 12v from PSU 3x8 PIN.
Have you met any of you with such a problem of sensors for indicating GPU current consumption in GPU-Z and HWinfo 64?
CPU - i9 [email protected] GHz 1.210v + 32 mesh
Mobo- ASUS RAMPAGE EXTREME VI ENCORE
GPU - 2x RTX 2080Ti FE (Samsung GDDR6)@2100/16000 + PG348Q 100 Hz / 3440x1440p / G-Sync
MEM - 32 GB G.Skill Trident Z Royale Silver @3800 Cl 220.127.116.11 T1
AUDIO - ASUS Xonar Phoebus Solo + Sennheiser HD 380 PRO
PSU - Corsair AX 1500i
Case - Phanteks Enthoo Elite