[Official] nVIDIA GeForce GTX TITAN X Owners Club - Overclock.net - An Overclocking Community

Forum Jump: 

[Official] nVIDIA GeForce GTX TITAN X Owners Club

Reply
 
Thread Tools
post #1 of 18336 (permalink) Old 03-17-2015, 04:57 PM - Thread Starter
Just another nerd
 
Sheyster's Avatar
 
Join Date: Aug 2009
Location: So-Cal, U.S.A
Posts: 5,464
Rep: 336 (Unique: 241)
nVIDIA GeForce GTX TITAN X Owner's club





Add yourself to the owner's club list using this form:

>> CLICK HERE <<

No need to ask to be added!







Official nVIDIA GTX TITAN X Specifications







nVIDIA GTX TITAN X Reviews

LIST OF TITAN X REVIEWS (Click to show)



nVIDIA GTX TITAN X Modified BIOS

STEP 1: GET THE LATEST VERSION OF NVFLASH

Credit to @JoeDirt for keeping it updated. See his thread below:

https://www.overclock.net/t/1521334

___________________________


RENAME LINKED BIOS FILES TO .ROM FROM .TXT/.DOC BEFORE FLASHING

STEP 2 - Bios Flashing Guide (UPDATED) (Click to show)
1. Get NvFlash from step 1 above. Create a folder on your C drive and copy the files to it.

2. Download the BIOS (.rom) file(s) you want to install. See links later in this post. Save the BIOS .rom file(s) to the same folder you have NvFlash saved in.

3. If you have a single Titan X card installed, an easy way to quickly install the BIOS is to drag the .rom file you want to install onto the NvFlash program icon in the folder. Be sure to answer "Y" to all the prompts.

NOTE: If you encounter an error that the card is write protected from being flashed, you must use the --protectoff NvFlash option before you flash. The drag-and-drop method will not work until you do that. See below for more information.

4. To manually flash 1 or more Titan X cards, open an Administrator CMD window as follows:

Click Start > Run > type in "CMD", right-click on the CMD icon, choose "Run as Administrator".

In the open CMD window, from the C prompt, change folders to the NvFlash folder. Use the CD (change directory) DOS command to do this.

If you don't know how to use CD, click here: http://www.computerhope.com/cdhlp.htm

5. To show all installed Titan X cards in your system with their respective device IDs, type in:

nvflash --list

in the open CMD window, then press Enter.

6. If you have only 1 Titan X card, the commands to flash it are:

nvflash -6 BIOSfilename.rom

Where BIOSfilename.rom is the filename of whatever BIOS you want to use.

NOTE: If you encounter an error that the card is write protected from being flashed, you must use the --protectoff NvFlash option before you flash, as follows:

nvflash --protectoff

7. To flash 2 or more cards, use the --index NvFlash option to specify which card to flash. You can see which index numbers need to be used from step 4 above. (nvflash --list)

For example, to flash 2 cards, SLI Titan X users will have to issue the following two commands:

nvflash -6 --index=0 BIOSfilename.rom

nvflash -6 --index=1 BIOSfilename.rom


You will have to confirm 'Y' a few times.

NOTE: If your motherboard has a PLX chip installed, you will have to flash around it. The PLX chip will have its own device ID when you run the nvflash --list command. You must identify which devices are the Titan X cards and flash them accordingly. If you don't understand this or need help, please post in the thread and we will help you get it done.

8. When you're done, reboot your PC.

9. It is always a good idea to re-install the nVidia GPU driver and OC tools (MSI Afterburner, EVGA Precision X) after flashing the BIOS.
Warning: Spoiler! (Click to show)

NVFlash-certs-bypassed-v5-206-0-1.zip 722k .zip file
Quote:
Originally Posted by Jpmboy View Post

yes here's step by step for sli:
Warning: Spoiler! (Click to show)
1) disable SLI
2) disable the display driver for each card
3) win8.1: open the nvflash folder, file>open cmnd prompt as admin; win7: open the nvflash folder, right click,>open cmnd prompt here
4) type nvflash --list (pcie index)
type nvflash --protectoff
*you will be prompted to emter the card index... repeat for each card.
5) type nvflash -i0 --save {name.rom}
6) type nvflash -i1 -6 {new.rom} (hit "Y" when prompted)
7) type nvflash -i0 -6 {new.rom} (ditto)
8) exit
9) enable both display drivers (don't enable SLI yet)
10) reboot
11) enable sli
12) done

thumb.gif

edit: the --protectoff command will prompt you for a pcie index, or include it in the command line
nvflash -i0{1,2,3} --protectoff
.


Rename these to .rom

GM200.doc 221k .doc file

GM200boostmod.doc 221k .doc file

GM200noboostmod.doc 221k .doc file
Warning: Spoiler! (Click to show)
Quote:
Originally Posted by Sheyster View Post

I've decided to just re-post a new file containing ALL of the GM200 BIOS files I have. The attached ZIP file contains:

1) Vanilla NVIDIA GM200 BIOS (GM200.ROM)

2) 425W TDP NVIDIA GM200 BIOS (GM200-425.ROM)

3) Vanilla EVGA SC GM200 BIOS (GM200SC.ROM)

4) 425W TDP EVGA SC GM200 BIOS (GM200SC-425.ROM)

Sorry for any confusion about the TDP limit in the other posts folks. redface.gif

thumb.gif

GM200BIOS.zip 601k .zip file

Info about the stock EVGA SC BIOS:

> +127 MHz to core clock
> Boost limit removed
> More aggressive boost table

The SC Modded BIOS has all of the above features, plus:

> Default TDP of 350w
> Max TDP of 425w (at 121% slider position)

I recommend that everyone use the SC modded BIOS (GM200SC-425.ROM).
Warning: Spoiler! (Click to show)
Quote:
Originally Posted by Cyclops View Post

Too much voltage can sometimes be a bad thing and cause instability. Here are two different BIOSes. One with 1.281V, the other with 1.312V. Lower ASIC cards like higher voltage with lower temperatures. Higher ASIC cards don't like higher voltage.

TitanX-1.281V.zip 221k .zip file

TitanX-1.312V.zip 221k .zip file

You can put them in the OP if you like.
Warning: Spoiler! (Click to show)
Quote:
Originally Posted by Sheyster View Post

New Bench BIOS:

- Based on the stock EVGA SC BIOS
- 1418 MHz Core
- 1519 MHz boost
- Voltage locked at 1.3125 for anything over 1342 MHz. HOWEVER - only displays 1.274 in PX and GPU-Z
- K-boost gives 1.274v/1519 MHz/450w TDP right from boot-up without touching anything in PX
- Default TDP: 450w (100%)
- Max TDP: 600w (133%)
- Max Temp 95 Deg C.

As stated in my previous post, you probably won't get better results with this over the opt33 Benching BIOS or the Cyclops 1.3125 BIOS.

I tested it myself and can confirm it works, but I only pushed to 1550 with it since I'm on air. DO NOT USE THIS IF ON AIR. This is just way too hot for that; too much vcore.

GM200-BENCH.zip 150k .zip file
Warning: Spoiler! (Click to show)
Quote:
Originally Posted by Sheyster View Post

Here is a special request BIOS. This one has voltage locked at 1.250v and is intended as sort of a maximum air BIOS, intended for cards with the stock cooler to get a slightly better OC than normal at 1.250v.

It is a modified EVGA SC BIOS featuring:

- 350w TDP at 100%
- 425w max TDP at 121%
- Voltage max locked at 1.250v for any speed at 1342+ MHz - no changes needed in PX.
- No boost limit
- Default SC clocks (+127 to core)

Have fun! smile.gif

GM200SC-MAXAIR.zip 150k .zip file
Warning: Jpmboys modded cyclops bios (Click to show)
Quote:
Originally Posted by Jpmboy View Post

Hey guys - I've been getting a number of requests for the bios named "cyclops3". I've been using this version of the Cyclops 1 bios for over a month (maybe longer?) without any issues. 475W TDP with 450W PL. Load voltage is 1.274V. I have never exceeded 130% Power in AB in anything (including catzilla Raymarch test which pulls more GPU juice than anything I know of ohno-smiley.gif ).

@szeged - maybe post this one in the OP as "jpmboy mod of Cyclops1"- IDK redface.gif
cyclops3.zip 150k .zip file
Warning: Sheyster modded HC bios! (Click to show)
Quote:
Originally Posted by Sheyster View Post

@szeged - Please add this to the OP. thumb.gif

The ZIP file attached contains the following two BIOS ROM images:

- Standard EVGA Hydrocopper BIOS - GM200HC.ROM

+152 MHz to core
More aggressive boost table over the SC BIOS - 74x boost multi = 1544 MHz

- Modded HC 425 BIOS - GM200HC-425.ROM

+152 MHz to core
More aggressive boost table over the SC BIOS - 74x boost multi = 1544 MHz
350w default power target, up to 425w (+121% on the slider)

This BIOS boosted to 1353 on my card without touching a thing:



GM200HC.zip 301k .zip file
Warning: Tuned down cyclops bios with aggressive fan profile! (Click to show)
Quote:
Originally Posted by Gabrielzm View Post

Not sure mate...But you might consider a BIOS that does not need software (Px or AB) to get a good oc. I am assuming you are on air? one or two cards? cyclops bios is the best for OCing I have tested but it is a bit on the "too much" voltage side for air. If you want to try a tune down version of it and with a more aggressive fan profile here is one that will go to 1.23 v core and boost to 1430 mhz. Quite stable since that voltage can even get you further up but I think that is plenty.

GM200gab7cycFAN.txt 221k .txt file

edit - this is the one I use 24/7 but I am under water. Keep an eye on the fan profile and card temps to see if the fan profile match the need for you case/airflow to keep temps under check if you decide to use it.

edit 2- for those having trouble renaming the file. Use command prompt, locate the directory with the file and use rename GM200gab7cycFAN.txt GM200gab7cycFAN.rom. Should work...




ok in zip...

GM200gab7cycFAN.zip 150k .zip file
NEW MAX AIR BIOS (Click to show)
Quote:
Originally Posted by Sheyster View Post

New MAXAIR2 BIOS is attached.

This new one is based on the EVGA HydroCopper BIOS.

Features:

- 450w PT/TDP limit at 150% slider (300w default)
- +152 to core (same as default HydroCopper) - boosts to 1353 MHz by default
- Max voltage under load: 1.2563v

@szeged - please add this to the OP to replace the older Maxair BIOS. That one had a glitch and should no longer be used. Thanks! thumb.gif

GM200HC-MAXAIR2.zip 150k .zip file
Sheyster ULTIMATE GM200 BIOS pack (Click to show)

ORIGINAL POST:
(includes all low voltage variants down to 1.15v)

https://www.overclock.net/t/1546747/official-nvidia-geforce-gtx-titan-x-owners-club/12210#post_24170415


Here is the new BIOS pack!

- Based on EVGA HC BIOS.

- 475w Power Limit at +119% slider position. 400w at 100%

- ZERO temp throttling up to 85 degrees C. Please keep your air cooled cards under 80 if possible folks!

- The Zip file below includes low voltage (1.237v), Maxair (1.256x) and WC (1.281v) versions

- The boost table and default boost has been altered for this BIOS. To calculate your +core needed for your maximum boost clock, the formula is (Amount of maximum boost you want - 1012).

- Example - For 1500 MHz max boost under load, the calculation is: 1500 - 1012 = 488 +core. Just move the +core slider to 488.

GM200-ULTIMATE.zip 451k .zip file

Have fun and as usual FLASH AT YOUR OWN RISK!

lilchronic mod3 BIOS (Cyclops 3 mod) (Click to show)
Quote:
Originally Posted by lilchronic 

mod3.zip 150k .zip file

it's cyclops 3 bios with voltage in AB +0 = 1.18v and +112= 1.274v
lilchronic mod10 BIOS (Cyclops 3 mod) (Click to show)
Quote:
Originally Posted by lilchronic 

I updated that bios a little, maybe you can add this one as well.

lilchronic-mod10.zip 150k .zip file

voltage, Boost limit and boost clock table adjusted.

1305mhz with 1,174v
1380Mhz with 1.274v




nVIDIA GTX TITAN X Waterblocks
EK Waterblocks (Click to show) EVGA/EK Waterblocks (Click to show)
EVGA/EK -

Aquacomputer Waterblocks (Click to show)
Aquacomputer







nVIDIA GTX TITAN X Hard Mods

Power mod: http://overclocking.guide/nvidia-gtx-titan-x-external-power-guide/

Pencil mod: http://overclocking.guide/nvidia-gtx-titan-x-volt-mod-pencil-vmod/





Official Club Forum Signature


Code:
[center][b]
:medieval: <img src="/images/smilies/post-flame-small.gif" ><a href="showthread.php?s=bd8d1313c09af4210eda3f9b5ad8a046&amp;t=1546747"><b> [Official] nVIDIA GeForce GTX TITAN X Owner's Club </b></a><img src="/images/smilies/post-flame-small.gif" >:medieval: 
[/center][/b]




Credits

@szeged - Original OP of this thread/club
@JoeDirt - NVFLASH updates
@Jpmboy - BIOS mods, flashing instructions, super helpful in general
@Cyclops - BIOS mods early on
@Gabrielzm - BIOS mods
@lilchronic - BIOS mods

If I missed anyone please PM me! thumb.gif
Attached Files
File Type: doc GM200.doc (220.5 KB, 654 views)
File Type: doc GM200boostmod.doc (220.5 KB, 465 views)
File Type: doc GM200noboostmod.doc (220.5 KB, 398 views)
File Type: txt GM200gab7cycFAN.txt (220.5 KB, 354 views)
File Type: zip GM200-ULTIMATE.zip (450.8 KB, 2197 views)

CPU: intel Core i9 9900K - 5 GHz all core HT on - 1.26v - Air cooled
MOBO: Gigabyte Z390 Aorus Pro
GPU: MSI Duke OC RTX 2080 Ti - 380w PL BIOS
RAM: G.Skill 32GB DDR4 3200 CL14 @ 3600 CL15 (Samsung B-die)
SSD: Samsung 970 EVO 1TB M.2 NVMe
PSU: EVGA SuperNOVA 1000 G3
CASE: "Open bench" - Stripped down Tt Core X9
Sheyster is online now  
Sponsored Links
Advertisement
 
post #2 of 18336 (permalink) Old 03-17-2015, 04:57 PM
New to Overclock.net
 
szeged's Avatar
 
Join Date: Nov 2012
Posts: 17,329
Rep: 737 (Unique: 415)





Still trying to get everything worked out.

google docs is going crazy for some reason so its still in a really early draft here.


also posting youtube videos for some reason cancels out the google doc graph so videos of the titan x are going in this post. -_-
szeged is offline  
post #3 of 18336 (permalink) Old 03-17-2015, 05:04 PM
New to Overclock.net
 
Join Date: Jan 2010
Posts: 3,825
Rep: 160 (Unique: 133)
Might join..I'm pretty sure my 450 watt PSU can handle it but not sure my wallet can.
Tennobanzai is offline  
Sponsored Links
Advertisement
 
post #4 of 18336 (permalink) Old 03-17-2015, 05:04 PM
professional curmudgeon
 
looniam's Avatar
 
Join Date: Apr 2009
Posts: 9,733
Rep: 795 (Unique: 452)
*lurking*

Remember the golden rule of statistics: A personal sample size of one is a sufficient basis upon which to draw universal conclusions.
Upload the computer to Dropbox and provide a link to it so others may download it to examine and give advice for repairs.
loon 3.2
(18 items)
CPU
i7-3770K
Motherboard
Asus P8Z77-V Pro
GPU
EVGA 980TI SC+
RAM
16Gb PNY ddr3 1866
Hard Drive
PNY 1311 240Gb
Hard Drive
1 TB Seagate
Hard Drive
3 TB WD Blue
Optical Drive
DVD DVDRW+/-
Power Supply
EVGA SuperNova 750 G2
Cooling
EKWB P280 kit
Cooling
EK-VGA supremacy
Case
Stryker M [hammered and drilled]
Operating System
Win X
Monitor
LG 24MC57HQ-P
Keyboard
Ducky Zero [blues]
Mouse
corsair M65
Audio
SB Recon3D
Audio
Klipsch ProMedia 2.1
▲ hide details ▲


looniam is offline  
post #5 of 18336 (permalink) Old 03-17-2015, 05:06 PM
I fix Stuff
 
XanderTheGoober's Avatar
 
Join Date: Apr 2013
Location: 45 minutes from MN Micro Center
Posts: 5,373
Rep: 316 (Unique: 244)
Jeez szeged, i just got done watching Linus Tech Tips vid on this thing and you have this created. Dang bro lol.

Helpful Links & Hardware History (Click to show)OCN Marketplace Expectations (Click to show)
- I always test my purchased products before leaving trader feedback. If I bought something from you and you have not gotten feedback give me a little friendly PM bump. smile.gif
- When selling items I do my best to pack and ship by the next business day.
- You can never communicate too much, that said I try to relay any relevant information during a transaction as soon as it becomes available.
- I am willing to work with you on whatever you need, I am only a PM away.
Xander's Windows tune up guide
XanderTheGoober is offline  
post #6 of 18336 (permalink) Old 03-17-2015, 05:06 PM
New to Overclock.net
 
szeged's Avatar
 
Join Date: Nov 2012
Posts: 17,329
Rep: 737 (Unique: 415)
If you guys see any errors or bugs in the OP let me know.
szeged is offline  
post #7 of 18336 (permalink) Old 03-17-2015, 05:07 PM
Not New to Overclock.net
 
Ramzinho's Avatar
 
Join Date: Apr 2009
Location: OCN, Brisbane, QLD
Posts: 9,198
Rep: 893 (Unique: 611)
Quote:
Originally Posted by XanderTheGoober View Post

Jeez szeged, i just got done watching Linus Tech Tips vid on this thing and you have this created. Dang bro lol.

i've been refreshing utube for 1 hour knowing linus will be the first to get it.. now i will go watch

Oh yeah, I'm Back.
Hot Flame (WIP)
(8 items)
CPU
AMD R7 3700X
Motherboard
Gigabyte X570 Aorus Pro Wifi
GPU
AMD 5700 XT
Hard Drive
Crucial P1
Power Supply
Seasonic Focus G
Case
Phanteks Enthoo Evolv X
Operating System
Windows 10 Pro
Monitor
Acer XR342CKP
▲ hide details ▲


Ramzinho is offline  
post #8 of 18336 (permalink) Old 03-17-2015, 05:10 PM
New to Overclock.net
 
rt123's Avatar
 
Join Date: Dec 2013
Posts: 3,453
Rep: 278 (Unique: 125)
Quote:
Originally Posted by szeged View Post

If you guys see any errors or bugs in the OP let me know.

I see an error.

Someone named szeged is on the "Owners List" without even ordering a single TitanX. lachen.gif

\Just Kidding.


rt123 is offline  
post #9 of 18336 (permalink) Old 03-17-2015, 05:10 PM
New to Overclock.net
 
CallsignVega's Avatar
 
Join Date: Aug 2010
Location: Saudi Arabia (US Military)
Posts: 8,385
Rep: 520 (Unique: 359)
2x on order, can't wait!

GPU: TITAN RTX - 2175 MHz, liquid cooled
CPU: 9900K 5.4 GHz, liquid cooled
MB: ASUS Maximus XI Gene
RAM: G.Skill 16GB 4600 MHz
SSD: Intel Optane 905P - 960GB
DISPLAY: LG C9 OLED
CallsignVega is offline  
post #10 of 18336 (permalink) Old 03-17-2015, 05:12 PM
New to Overclock.net
 
szeged's Avatar
 
Join Date: Nov 2012
Posts: 17,329
Rep: 737 (Unique: 415)
Quote:
Originally Posted by rt123 View Post

I see an error.

Someone named szeged is on the "Owners List" without even ordering a single TitanX. lachen.gif

\Just Kidding.

lol biggrin.gif

Ill order tomorrow when you can get more than one at a time -_- not paying $65 shipping x4 just because they want to put in artificial limits.

also not buying direct from nvidia.
Quote:
Originally Posted by CallsignVega View Post

2x on order, can't wait!


nice biggrin.gif
szeged is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off