[Official] NVIDIA GTX 1080 Ti Owner's Club - Page 1802 - Overclock.net - An Overclocking Community

Forum Jump: 

[Official] NVIDIA GTX 1080 Ti Owner's Club

Reply
 
Thread Tools
post #18011 of 18044 (permalink) Old 06-05-2019, 01:16 AM
Like a fox!
 
kithylin's Avatar
 
Join Date: Jan 2010
Location: Dallas, Texas, USA
Posts: 2,116
Rep: 77 (Unique: 58)
Quote: Originally Posted by Cryptedvick View Post
Well thats pretty good actually. Well within the average for most 1080Ti's. Max I can do on my MSI is 2063Mhz at 1.093v.
What I have found personally is that with these cards we actually do not need the XOC bios to avoid throttling. I'm actually able to maintain 2012~2025 Mhz on this card and never drop below it on stock bios just because I'm able to keep the card < 45c at all times (even when the ambient room temps in the computer room where the physical tower is sometimes gets up to 32c ambient temps) due to a large custom water loop with 4 radiators and 15 fans. If we can just keep the cards cool enough they don't throttle at all. It's the temperatures that throttle 1080 Ti's badly. I vividly remember when I first bought this card on it's stock air cooler (EVGA GTX 1080 Ti SC Black Edition) I was trying to run it at max overclock and it would start out around 1950 Mhz core speed and then when I would play a while it would heat up terribly up to the mid-70's C core speed (even with the fans forced at 100% constantly) and eventually throttle it's self down to the low 1800~1820 Mhz range after eventually heating up around 80c. And now today with this big loop and I can keep it < 45c it stays at 2012-2025 mhz all the time and never goes below that. Well in benchmarks.. in actual games I play with Vsync on for 80 FPS / 80hz currently, so it often switches down around 1200-1300 mhz depending on how hard the game I'm playing loads it. But if I play a game like ARK: Survival Evolved, it can run at 2088 all day for hours now @ 40-43c with no throttling.

I don't think XOC is actually that beneficial. We can't even use XOC on an air cooled card anyway (safely) and if you're custom water already then it seems the cards shouldn't throttle themselves if your loop is big enough to keep them cool enough, even without using XOC.

EDIT: Fixed some Mhz typos.. I must of been drunk when I first wrote this post. I have no idea where I got 2088 from with the previous page and this post. My card maxes out at 2025 Mhz now on stock bios.

Last edited by kithylin; 06-05-2019 at 02:59 AM.
kithylin is offline  
Sponsored Links
Advertisement
 
post #18012 of 18044 (permalink) Old 06-23-2019, 01:55 AM
New to Overclock.net
 
Join Date: Jun 2019
Posts: 4
Rep: 0
Hey, guys! There is Gigabyte 1080ti Gaming OC cooling system photo:



Is it possible to identify thermal pads thickness by this photo?
ZloY SloN is offline  
post #18013 of 18044 (permalink) Old 06-23-2019, 02:07 AM
Manual breath enabled
 
Streetdragon's Avatar
 
Join Date: Apr 2013
Location: In my celler
Posts: 1,157
Rep: 26 (Unique: 22)
looks like 0,5mm thick pads, but im not sure

Gameingcube
(18 items)
CPU
Ryzen 3900X
Motherboard
Aorus X570 Master
GPU
1080 TI Founders Edition
GPU
1080 TI Founders Edition
RAM
F4-3600C16Q-32GTZR
Hard Drive
2000GB Seagate Barracuda Compute ST2000DM008 256MB
Hard Drive
2000GB Seagate Barracuda Compute ST2000DM008 256MB
Hard Drive
samsung m2 970 evo
Power Supply
Leadex 80 Plus Platinum Netzteil, schwarz - 1200 Watt
Cooling
heatkiller IV pro
Cooling
EK-FC1080 GTX Ti - Nickel
Cooling
EK-FC1080 GTX Ti - Nickel
Cooling
Alphacool Eisbecher D5 250mm Plexi
Cooling
Alphacool NexXxoS XT45 Full Copper 480mm
Cooling
XSPC Multiport Radiator EX240
Cooling
Scythe Grand Flex 4Pin PWM
Case
thermaltake core x9
Operating System
Windows 10
▲ hide details ▲
Streetdragon is offline  
Sponsored Links
Advertisement
 
post #18014 of 18044 (permalink) Old 06-23-2019, 05:27 AM
New to Overclock.net
 
Join Date: Jun 2019
Posts: 4
Rep: 0
0.5mm, but they were shrunk under pressure. I think I should go with 1mm pads. Thanks.


ZloY SloN is offline  
post #18015 of 18044 (permalink) Old 06-24-2019, 12:13 AM
New to Overclock.net
 
Join Date: Jun 2019
Posts: 1
Rep: 0
Hello everyone,

I know it is a 1080TI Owner's club, but it popped up in google search when I searched for Total GPU power (normalized) (% of TDP) :)
I have an Asus strix 1080 (no OC, everything is on the factory settings, never tried OCing it) and my normalized TDP jumps up when I am in game to 200-400%. Is that normal?

I hope you can open the picture.
https://imgur.com/a/fmpVYcM

Thanks for the help!
Bonhart89 is offline  
post #18016 of 18044 (permalink) Old 06-24-2019, 11:19 AM
New to Overclock.net
 
skupples's Avatar
 
Join Date: Apr 2012
Location: Fort Lauderdale
Posts: 18,079
Rep: 535 (Unique: 304)
most air coolers use 1s, or larger, while blocks use 1s n smaller. LOL, some of these nasty blowers use 3mm pads.

R.I.P. Zawarudo, may you OC angels' wings in heaven.
If something appears too good to be true, it probably is.
skupples is offline  
post #18017 of 18044 (permalink) Old 07-19-2019, 03:39 PM
PC Enthusiast
 
Norlig's Avatar
 
Join Date: Aug 2010
Location: West coast of Norway
Posts: 3,487
Rep: 118 (Unique: 108)
Just reinstalled windows.

What was the softmod needed for 1.093v?

I tried the curve settings in the first post, but seems I top off at 1.062v now.

Dont remember what was needed to get it to ignore whatever limits it could ignore...

Main Rig:
Asus Strix X299-A , Intel Core i7-7800x @ 4.8Ghz, 32GB Corsair Vengeance 3200Mhz CL16 , Asus Geforce GTX 1080ti FE, Corsair RM850i, 3x Samsung 850 Evo 250GB in Raid0, WD Blue 1TB, Custom Watercooling.
Norlig is offline  
post #18018 of 18044 (permalink) Old 07-19-2019, 04:02 PM
New to Overclock.net
 
Zfast4y0u's Avatar
 
Join Date: Dec 2017
Posts: 294
Rep: 1 (Unique: 1)
Quote: Originally Posted by Norlig View Post
Just reinstalled windows.

What was the softmod needed for 1.093v?

I tried the curve settings in the first post, but seems I top off at 1.062v now.

Dont remember what was needed to get it to ignore whatever limits it could ignore...
if using msi afterburner, move voltage slider all the way to the right, then in curve you can set ur voltage/freq curve till 1.093mV instead of 1.062mV thats by default with voltage slider being all to the left.


btw, just installed shadow of the tomb raider, was waiting for em to release last patch and all tombs before i dive into it. must say, multi gpu support ( yes multi gpu not sli or crossfire ) is like i have nothing i seen before, scaling +90%

and then u get this gipsy's that roll out AAA titles every year and cant bother with it, but this little studio pulled it off. hats off to them. directX 12 doing its magic when properly implemented. this should be future of multi gpu systems, not freakin 80$ nvlink.
Attached Thumbnails
Click image for larger version

Name:	solo 5ghz part 1.jpg
Views:	16
Size:	2.01 MB
ID:	281634  

Click image for larger version

Name:	sli 5ghz part 1.jpg
Views:	16
Size:	2.01 MB
ID:	281636  


Last edited by Zfast4y0u; 07-19-2019 at 04:06 PM.
Zfast4y0u is offline  
post #18019 of 18044 (permalink) Old 07-19-2019, 08:34 PM
New to Overclock.net
 
KCDC's Avatar
 
Join Date: Jan 2017
Posts: 943
Rep: 22 (Unique: 19)
Howdy ladies and gents. Anyone know a quick link to reinstalling the Founder Edition coolers? Also, anyone remember the factory pad thicknesses? Thank you kindly!


EDIT: Using a vid in reverse for install, but still want to know the original pad thicknesses if anyone may know.


EDIT 02: for the small weird white thermal "pads" that came on the card in some areas, would a .5 pad be ok for those? I'm prepping these cards for sale to a friend.

ZMT watercool setup -- Phanteks Enthoo Elite -- hwlabs gtr 420 x 2 -- noctua A14 PWM x8 -- d5 pwm -- 9900x -- x299 TUF Mk1
Corsair Hydro X XC9 -- 64gb 3200 tridentZ Royal CL14 -- AX1500i -- 2x 7600p on hyper m.2 VROC 4TB -- EK ZMT Tubing -- Ek Fittings -- dual Aorus Waterforce xtreme 2080ti -- asus PG279UZ monitors x3 7680x1440 surround
Bertha 5.0
(22 items)
CPU
9900x
Motherboard
X299 TUF Mk1
GPU
1080ti FE
GPU
1080ti FE
RAM
GSkill Royal
Hard Drive
Hyper m.2
Power Supply
Ax1500i
Cooling
HWL GTR 420 x2
Cooling
EKWB 1080ti blocks x2
Cooling
EK Supremecy EVO RGB
Cooling
Noctua A14 PWM x8
Cooling
Corsair ML140 x6
Cooling
EK ZMT tubing
Cooling
EK D5 PWM pump/res
Cooling
EK Fittings
Cooling
Corsair Commander Pro
Case
Phanteks Enthoo Elite
Operating System
Windows 10 Pro
Monitor
Asus PG279QZ x3
Keyboard
Corsair K95 RGB Platinum
Mouse
Corsair Nightsword
Mousepad
Corsair MM800 Polaris
▲ hide details ▲

Last edited by KCDC; 07-19-2019 at 08:52 PM.
KCDC is offline  
post #18020 of 18044 (permalink) Old 07-20-2019, 11:39 PM
Knowledge is Success
 
Knoxx29's Avatar
 
Join Date: Jul 2015
Posts: 335
Rep: 2 (Unique: 2)
Quote: Originally Posted by kithylin View Post
now today with this big loop and I can keep it < 45c it stays at 2012-2025 mhz all the time and never goes below that. Well in benchmarks.. in actual games I play with Vsync on for 80 FPS / 80hz currently, so it often switches down around 1200-1300 mhz depending on how hard the game I'm playing loads it. But if I play a game like ARK: Survival Evolved, it can run at 2025all day for hours now @ 40-43c with no throttling

My card used to behave like your 2026-2012mhz most of the time 2026 and rarely dropped to 2012, when I say used to it's because something weird that i can't explain happened last week when i did a fresh windows installation, since then the card won't do 2026-2012mhz but instead 2038mhz and it wont go below that, i played hours and hours many different Games and ran like 3 or 4 different Benchmarks and the card stay all the time at 2038mhz, something I find funny is that your cooling system with 4 radiators and 15 fans has way more cooling capacity than my cooling system which has just a single 360 Rad and my GPUs temperature is 47-50c.

BlackWidow
(16 items)
SR 2 Prototype
(11 items)
CPU
Intel i7 8086K
Motherboard
Asus Rog Maximus XI Extreme
GPU
EVGA GeForce GTX 1080 Ti FTW3 GAMING
RAM
G.skill F4-3866C18Q-32GTZ
Hard Drive
Samsung 970 Evo
Hard Drive
Samsung 960 Evo
Hard Drive
Samsung 850 Evo
Hard Drive
Samsung 840 Evo
Hard Drive
Western Digital Black
Hard Drive
Western Digital Blue
Hard Drive
Western Digital Blue
Power Supply
Enermax platimax
Cooling
Waterchiller
Case
Lian Li V3000
Operating System
Windows 10 pro
Monitor
Asus rog swift pg278q
CPU
Xeon X5677
Motherboard
Evga SR 2
GPU
Geforce Gtx 1080 classified
RAM
G.Skill RipjawsX
Hard Drive
Samsung 850 Evo
Hard Drive
Western Digital blue
Power Supply
Enermax Platimax 80Plus Platinum OC Edition
Cooling
ARCTIC Freezer XTREME Rev. 2
Case
Lian Li PC-A75WX
Operating System
Windows 7 Ultimate
Monitor
Asus ROG SWIFT PG278Q
▲ hide details ▲
Knoxx29 is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off