Evga FTW3 GTX 1080 Ti Owner's Thread - Page 72 - Overclock.net - An Overclocking Community

Forum Jump: 

Evga FTW3 GTX 1080 Ti Owner's Thread

Reply
 
Thread Tools
post #711 of 716 (permalink) Old 07-01-2018, 02:18 PM
Linux Lobbyist
 
BullyApC's Avatar
 
Join Date: Jul 2017
Posts: 6
Rep: 0
Kokin, thanks for the clarification. I noticed that there were 3 FTW3 Kingpin posted Bios installing applications. The release dates on them were all back in March. At the exact same time that Kingpin posted his three applications, this .rom was posted at techpowerup: https://www.techpowerup.com/vgabios/...i-11264-180309. I think it is the same bios. I have been running it for a while now. Before flashing to that bios, my superpostion score on extreme was: 6466, after the flash my score improved to: 6513. That seems like a small improvement but honestly it's' a huge jump.

CPU: 7700K @ 5.1 AIO
MOBO: Asus Maximus IX APEX
Memory: GSKILL DDR4 16GB 3200
GPU: EVGA 1080Ti SC w/ FTW flash
Storage: 2 Samsung 960 250GB NVMe RAID 0, 1 Samsung 960 500GB NVMe, 3 Samsung 950EVO 250GB RAID 0, 1 WD 1TB Black
BullyApC is offline  
Sponsored Links
Advertisement
 
post #712 of 716 (permalink) Old 10-17-2018, 06:09 AM
Overclocker in training
 
ThrashZone's Avatar
 
Join Date: Apr 2017
Posts: 6,972
Rep: 62 (Unique: 48)
Hi,
Darn thread was buried lol

For the record this is the ftw3's slave vbios
https://www.techpowerup.com/vgabios/...i-11264-170418

And the king|pin fix just read the op it does fix the slave vbios perfectly
https://forums.evga.com/1080-TI-FTW3...-m2693145.aspx

Vaper
(4 items)
CPU
i9-9940x With evo and koolance vrm water blocks
Motherboard
ASUS x299 TUF Mark 2
GPU
Titan Xp with copper Water Block
RAM
Trident Z 3600C16 4x8gb's b-die default timings 16-16-16-36
Hard Drive
Samsung 970 Evo Plus 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Optical Drive
LG Blu-Ray WH16NS40
Power Supply
evga 1200-P2
Cooling
2-280GTX Black Ice Nemesis rads with D5 pump-res combo and D5 top before and after rads.
Case
corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 pro & 10 pro Win-7 Primary os.
Monitor
ASUS VG248QE 24" 144Hz
Keyboard
Logitech G910 Orion spectrum
Mouse
Redragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
Audio
Built in realtek with Insignia 2.0 soundbar HSB318
CPU
i7-5930k with evo and koolance vrm water blocks
Motherboard
X99 Sabertooth
GPU
EVGA 1080ti FTW3 with Water block
RAM
Trident-Z 3200C14 4x8gb's b-die default timings 14-14-14-34
Hard Drive
Samsung 970 Evo 500gb M.2 for os/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Power Supply
EVGA 1000-P2
Cooling
2-240 GTX Black Ice Nemesis rads/ D5 pump-res combo and D5 top before and after rads.
Case
Corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 and 10 pro Win-7 Primary os.
Monitor
AOC G2460PG 24"G-Sync 144Hz
Mouse
Red Dragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
Hard Drive
eLeaf MELO-3 4ml
Power Supply
SE US18650VTC6 3120mAh 30A 3.6V 18650 Li-ion Battery - GREENx4
Case
ANGIS Legion MOD 200w Geek Vape
Operating System
VapeWild RazzleBerry 50-50-0mg nic
▲ hide details ▲

Last edited by ThrashZone; 10-17-2018 at 06:26 AM.
ThrashZone is offline  
post #713 of 716 (permalink) Old 10-17-2018, 09:21 AM
New to Overclock.net
 
Join Date: Oct 2018
Posts: 21
Rep: 0
Looks like I found the right thread for me, since I have this card. I am currently trying to run a custom curve. What kind of clocks can I expect at 1 V? No matter what I try, applying a custom fan curve will crash.

I also have the EVGA software installed (because I once reworked the fancurves for each fan), but use Afterburner.
DivineLight is offline  
Sponsored Links
Advertisement
 
post #714 of 716 (permalink) Old 10-17-2018, 09:59 AM
Overclocker in training
 
ThrashZone's Avatar
 
Join Date: Apr 2017
Posts: 6,972
Rep: 62 (Unique: 48)
Hi,
You'd have to show some screen shots what your clocks are exactly
Power limit I'd stay lower than maxed out same with core voltage all it does is zap to nvidia driver safety features at best it may throttle the heck out of it worst as you state crash.

OC 101 is max all three fans 100% using evga precision it's the only utility that can control them all
After that you could use msi ab but why unless you want to use a custom core clock and I doubt you'd be able to go further than 2038MHz maybe 2050 at 1083 or so 1093v is hit and miss at about core +88 depending on the benchmark used.

Memory clock is usually the best I've used on air cooling +900 easily most the time.
Core clock is the quirk
All I can say is start with +65 and run the memory clock up as far as you can until you get memory spots and dial it down -20.. until they disappear.

Then start raising the core clock +13 until unstable happens.

On another note if the card is going past 60c you're wasting time oc'ing it further you're passing the throttling temp and the ftw3 has three sensors which will cause throttling core/ memory/ power sensors of which power is usually highest and not read by msi ab

Vaper
(4 items)
CPU
i9-9940x With evo and koolance vrm water blocks
Motherboard
ASUS x299 TUF Mark 2
GPU
Titan Xp with copper Water Block
RAM
Trident Z 3600C16 4x8gb's b-die default timings 16-16-16-36
Hard Drive
Samsung 970 Evo Plus 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Optical Drive
LG Blu-Ray WH16NS40
Power Supply
evga 1200-P2
Cooling
2-280GTX Black Ice Nemesis rads with D5 pump-res combo and D5 top before and after rads.
Case
corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 pro & 10 pro Win-7 Primary os.
Monitor
ASUS VG248QE 24" 144Hz
Keyboard
Logitech G910 Orion spectrum
Mouse
Redragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
Audio
Built in realtek with Insignia 2.0 soundbar HSB318
CPU
i7-5930k with evo and koolance vrm water blocks
Motherboard
X99 Sabertooth
GPU
EVGA 1080ti FTW3 with Water block
RAM
Trident-Z 3200C14 4x8gb's b-die default timings 14-14-14-34
Hard Drive
Samsung 970 Evo 500gb M.2 for os/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Power Supply
EVGA 1000-P2
Cooling
2-240 GTX Black Ice Nemesis rads/ D5 pump-res combo and D5 top before and after rads.
Case
Corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 and 10 pro Win-7 Primary os.
Monitor
AOC G2460PG 24"G-Sync 144Hz
Mouse
Red Dragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
Hard Drive
eLeaf MELO-3 4ml
Power Supply
SE US18650VTC6 3120mAh 30A 3.6V 18650 Li-ion Battery - GREENx4
Case
ANGIS Legion MOD 200w Geek Vape
Operating System
VapeWild RazzleBerry 50-50-0mg nic
▲ hide details ▲

Last edited by ThrashZone; 10-17-2018 at 10:06 AM.
ThrashZone is offline  
post #715 of 716 (permalink) Old 10-21-2018, 11:28 AM
New to Overclock.net
 
Join Date: Nov 2015
Posts: 3
Rep: 0
Hey all,

Has anybody here had any success installing a Morpheus II cooler onto their FTW3? I'm trying to figure out if it's possible to install it while keeping the baseplate that cools the VRM/Memory intact.

Also, wondering if anyone has a stock backplate and or baseplate that they would like to unload. EVGA will not sell the parts for it.

Thanks!
Spall is offline  
post #716 of 716 (permalink) Old 07-18-2019, 12:33 AM
New to Overclock.net
 
Join Date: Nov 2015
Posts: 3
Rep: 0
Still looking for a stock backplate and baseplate if anybody who went water has one they want to unload.
Spall is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off