[Official] NVIDIA RTX 2080 Ti Owner's Club - Page 639 - Overclock.net - An Overclocking Community

Forum Jump: 

[Official] NVIDIA RTX 2080 Ti Owner's Club

Reply
 
Thread Tools
post #6381 of 7258 (permalink) Old 02-17-2019, 07:51 AM
New to Overclock.net
 
Dr Mad's Avatar
 
Join Date: Oct 2013
Posts: 182
Rep: 15 (Unique: 8)
Quote: Originally Posted by mackanz View Post
Did anyone succeed to flash a non-a chip, reference design 2080 ti, to a bios with a higher limit?
I got a poor Windforce (non oc) 2080 Ti with 109% that clocks pretty good in itself, but clearly limited with its bios.
Unless I'm wrong, it seems it's still not possible to flash non A chip. Only solution is to do shunt mod.

Otherwise, I see in the OP that nvflash was updated to support FE cards. Is the bios flash on FE 2080ti card really possible??
Dr Mad is offline  
Sponsored Links
Advertisement
 
post #6382 of 7258 (permalink) Old 02-17-2019, 09:35 AM
New to Overclock.net
 
MunneY's Avatar
 
Join Date: Mar 2012
Location: Memphis
Posts: 6,173
Rep: 327 (Unique: 253)
Quote: Originally Posted by Dr Mad View Post
Unless I'm wrong, it seems it's still not possible to flash non A chip. Only solution is to do shunt mod.

Otherwise, I see in the OP that nvflash was updated to support FE cards. Is the bios flash on FE 2080ti card really possible??
I flashed my 2 FE cards with the 380w 127% power limit cards. Not had any trouble once i remembered how to use NVFlash LOL
MunneY is offline  
post #6383 of 7258 (permalink) Old 02-17-2019, 10:32 AM
Invalid Media
 
J7SC's Avatar
 
Join Date: Dec 2018
Posts: 505
Rep: 2 (Unique: 2)
Quote: Originally Posted by MunneY View Post
I flashed my 2 FE cards with the 380w 127% power limit cards. Not had any trouble once i remembered how to use NVFlash LOL

...yup, it used to be 2nd nature, but the last time I flashed a GPU bios (w/ multi Bios switch to boot) was many years ago, and never with Win 10 as the OS
J7SC is offline  
Sponsored Links
Advertisement
 
post #6384 of 7258 (permalink) Old 02-17-2019, 11:44 AM
Maximum OCN
 
CptSpig's Avatar
 
Join Date: Nov 2016
Location: West Coast
Posts: 1,495
Rep: 71 (Unique: 43)
Quote: Originally Posted by Dr Mad View Post
Unless I'm wrong, it seems it's still not possible to flash non A chip. Only solution is to do shunt mod.

Otherwise, I see in the OP that nvflash was updated to support FE cards. Is the bios flash on FE 2080ti card really possible??
Yes, I have a Nvidia 2080ti FE with the 380w bios. Use the FE modified NV flash in the op. See benchmarks below for the results of the 380w bios.

http://www.3dmark.com/spy/5870453
http://www.3dmark.com/fs/17951194

X299 RIG
(19 items)
X99 RIG
(17 items)
CPU
i9-7980XE
Motherboard
ASUS ROG RAMPAGE VI APEX LGA2066 DDR4 M.2 X299 EATX Motherboard
GPU
Nvidia TITAN Xp
RAM
G.SKILL TridentZ Series 32GB (4 x 8GB) 288-Pin DDR4 SDRAM DDR4 3600 (PC4 28800) Model F4-3600C16Q-32GTZKK
Hard Drive
Samsung SSD 960 EVO NVMe M.2 500GB
Hard Drive
Samsung SSD 850 Pro 2.5" SATAIII 512 GB
Power Supply
Corsair AX1500i Digital ATX Power Supply
Cooling
EKWB EK-FC Titan X Pascal - Acetal+Nickel
Cooling
EXC-800 Portable 800W Recirculating Liquid Chiller
Cooling
Phobya G-Changer Xtreme NOVA 1080 radiator 60mm - Full Copper
Cooling
CPU-390I Water Block, Nickel Top
Cooling
EK-XRES 140 DDC 3.2 PWM Elite
Case
PrimoChill Praxis Wet bench
Operating System
Windows 10 Pro 64 bit
Monitor
ASUS ROG Swift PG279Q Gaming Monitor - 27" 2K WQHD (2560 x 1440) IPS, overclockable 165Hz, G-SYNC
Keyboard
Corsair Gaming K70 RGB Mechanical Gaming Keyboard — Cherry MX Red
Mouse
M65 PRO RGB FPS Gaming Mouse — Black
Mouse
SteelSeries QcK XXL
Audio
Corsair Vengeance 2100 wireless
CPU
i7-6950X Processor
Motherboard
MSI X99A GODLIKE GAMING CARBON
GPU
Nvidia TITAN X Pascal
RAM
Corsair Dominator Platinum Series 32GB (4 x 8GB) DDR4 DRAM 3200MHz C16 Memory Kit
Hard Drive
Samsung SSD 960 EVO NVMe M.2 500GB
Hard Drive
Samsung SSD 850 PRO 2.5" SATA III 512GB
Power Supply
EVGA SuperNOVA 1000 G2 Power Supply
Cooling
EK-XLC Predator 360 (incl. QDC) with DDC3.2 PWM pump upgrade with EK-DDC Heatsink Housing - Black
Cooling
EKWB EK-FC Titan X Pascal - Acetal+Nickel
Cooling
Koolance EXC-800 Portable 800W Recirculating Liquid Chiller
Case
PrimoChill Praxis Wet bench
Operating System
Windows 10 Pro 64 bit
Monitor
ASUS ROG Swift PG279Q Gaming Monitor - 27" 2K WQHD (2560 x 1440) IPS, overclockable 165Hz, G-SYNC
Keyboard
Corsair Gaming K70 RGB Mechanical Gaming Keyboard — Cherry MX Red
Mouse
M65 PRO RGB FPS Gaming Mouse — Black
Mouse
SteelSeries QcK XXL
Audio
Corsair Vengeance 2100 wireless
▲ hide details ▲

Last edited by CptSpig; 02-19-2019 at 02:16 PM.
CptSpig is offline  
post #6385 of 7258 (permalink) Old 02-17-2019, 01:08 PM
New to Overclock.net
 
mackanz's Avatar
 
Join Date: Feb 2015
Posts: 105
Rep: 1 (Unique: 1)
Thanks,

What was the exact commands to use?

9900k @5-G.Skill 3600 CL16-EVGA G3 850-Inno3D Black AIO RTX 2080 ti-Acer 1440p Gsync-Audio Technica ATH-AD700x-Rode Podcaster-Creative Soundblaster G5 soundcard-Logitech G900 Mouse-Razer Tournament Chroma V2 Yellow
mackanz is offline  
post #6386 of 7258 (permalink) Old 02-17-2019, 03:32 PM
New to Overclock.net
 
bigbangSG's Avatar
 
Join Date: Jan 2014
Posts: 72
Rep: 0
Quote: Originally Posted by Vidati View Post
Quote: Originally Posted by bigbangSG View Post
Hi any one 2080ti having problem? My Com shutdown suddenly when I was playing games . And I was unable to on it back until I off and on back the power. Really nid some help here.
I have the same thing, i have Gigabyte Gaming OC and i think that their software is the problem. i have been experiencing loosing power and then i need to unplug and plug again.
Delete all Gigabyte software if you have any including RGB Fusion.



So u delete their software and it ok nw?
bigbangSG is offline  
post #6387 of 7258 (permalink) Old 02-17-2019, 04:20 PM
New to Overclock.net
 
Join Date: Apr 2018
Posts: 89
Rep: 0
Well, I've been running my two NVidia FE RTX2080ti cards for over two weeks, so I decided on this holiday weekend it was time to tear my system apart and extend the watercooling to these cards.

Long story short, the screws that were removed from the EKWB GPU cooler terminals are too short to use for the Terminal X bridge between the two cards. SO, I have to demote my system back to single air-cooled GTX1080 FTW. I'll survive. The cards were working well and I expect them to run cooler once I reinstall them.

To clean up my installation, I'm trying to hide the cable that runs to the EK RTX terminal covers. My cards are installed horizontally, so I'll be staring at the backplates, not the plexiglass sides of the cards. I could just dangle the wires in the space below each card, but noticed there is plenty of space between the PC board and the plexiglass to run the thin LED cable. It would make for a very clean install, but I'm concerned that the wire may interfere, or melt, if it comes into contact with hot elements on the PC board.

Soooo, any electronics experts out there, please take a look at the image in the link below and let me know if this could be trouble, or if it will end up being fine to do this.

https://imgur.com/B1Jd1iE

BuildOne
(8 items)
CPU
Core i9-7900X
Motherboard
Thermaltake Core P5 - Tempered Glass - Black
Motherboard
Asus Prime X299-Deluxe
GPU
EVGA GTX 1080 FTW
RAM
G. Skill Trident Z RGB 3200
Hard Drive
Samsung 970 Pro M.2
Power Supply
Corsair HX 1200i
Cooling
EKWB
▲ hide details ▲
Bighouse is offline  
post #6388 of 7258 (permalink) Old 02-17-2019, 07:06 PM
Just another nerd
 
Sheyster's Avatar
 
Join Date: Aug 2009
Location: So-Cal, U.S.A
Posts: 5,233
Rep: 331 (Unique: 237)
Quote: Originally Posted by Nicklas0912 View Post
I got a RTX 2080 TI XC Ultra.

Wich bioos is the best for max overclocking.

I see so many 380W bios,

is it GALAX RTX 2080 Ti OC Reference PCB (2x8-Pin) 300W x 126% Power Target BIOS (380W) ?

That's a reference PCB so yes you should use the 380w GALAX BIOS listed in the OP.

Quote: Originally Posted by MunneY View Post
I flashed my 2 FE cards with the 380w 127% power limit cards. Not had any trouble once i remembered how to use NVFlash LOL

Glad you got it sorted out.

CPU: intel Core i9 9900K - 5 GHz x 8 cores - HT on - 1.26v - Air cooled
MOBO: Gigabyte Z390 Aorus Pro
GPU: MSI Duke OC RTX 2080 Ti - 380w PL BIOS
RAM: G.Skill 16GB DDR4 4000 CL18
SSD: Samsung 970 EVO 1TB M.2 NVMe
PSU: EVGA SuperNOVA 1000 G3
CASE: "Open bench" - Stripped down Tt Core X9
Sheyster is offline  
post #6389 of 7258 (permalink) Old 02-17-2019, 08:28 PM
New to Overclock.net
 
Join Date: Oct 2018
Posts: 20
Rep: 0
Quote: Originally Posted by bigbangSG View Post
So u delete their software and it ok nw?
Correct, give it a try.

CPU:2700x|Cooler:H150i PRO|Mobo:C7H|Ram:2x16GB 3200 CL14|GPU:RTX 2080TI|SSD1:970 EVO 1TB|SSD2:2x500GB Raid 0|HDD:3TB WD|Case:Lian Li O11B Dynamic|PSU:EVGA G2 750W|Monitor:LG 34UM95 3440x1440x60hz
Vidati is offline  
post #6390 of 7258 (permalink) Old 02-17-2019, 08:34 PM
New to Overclock.net
 
KCDC's Avatar
 
Join Date: Jan 2017
Posts: 853
Rep: 22 (Unique: 19)
Hello friends!
Looking at the possibility of joining the 2080ti club.
This would be for my 3d/mograph/vfx work, mostly redshift gpu rendering, and of course gaming here and there on my triple monitor setup and streaming to my 4k tv.
Currently running 2 1080ti FE cards on water. They would go into a render node.
Planning to run water on two 2080 tis as well.
Learning from my past mistake, I won't go with FE cards again in hopes of better clocks.
Leaning towards the EVGA FTW3 with waterblock preinstalled.
Wondering if it would be worth waiting for the kingpin variant, or if I'm better off getting a specific card and putting my own blocks on it. Probably the phanteks or ekwb vector block if that's the better route.
What do y'all suggest? Still combing through this thread.


EDIT: formatting, OCN seems to put a ton of spaces between my line breaks...

ZMT watercool setup -- Phanteks Enthoo Elite -- hwlabs gtr 420 x 2 -- noctua A14 PWM x8 -- d5 pwm -- 9900x -- x299 TUF Mk1
EK Supremacy RGB-- 32gb 3200 tridentZ -- AX1500i -- 2x 7600p on hyper m.2 VROC 4TB -- EK ZMT Tubing -- Ek Fittings -- dual 1080ti FE -- EK 1080ti Waterblocks -- asus 25" monitors x3 7680x1440 surround
Bertha 5.0
(20 items)
CPU
i7 9900x
Motherboard
X299 TUF Mk1
GPU
GeForce 1080ti FE
GPU
GeForce 1080ti FE
RAM
G.Skill Trident Z
Hard Drive
950 Pro
Hard Drive
WD Black
Power Supply
Corsair AX1500i
Cooling
HWLabs GTR 420 Radiators x2
Cooling
EK 1080Ti waterblock x2
Cooling
EXWB Supremacy RGB
Cooling
EK D5 PWM Revo pump res combo
Cooling
EK X3 Res
Cooling
EK ZMT Tubing
Case
Phanteks Enthoo Elite
Operating System
Win 10 Pro
Monitor
Asus pb258q x3
Keyboard
Asus Claymore MX Brown
Mouse
Asus ROG Spatha
Audio
SoundBlasterX AE-5
▲ hide details ▲

Last edited by KCDC; 02-17-2019 at 09:51 PM.
KCDC is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 5 (1 members and 4 guests)
roccale
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off