Gigabyte GTX 1080TI Gaming OC 11GB Overclock Guide - Page 2 - Overclock.net - An Overclocking Community

Forum Jump: 

Gigabyte GTX 1080TI Gaming OC 11GB Overclock Guide

Reply
 
Thread Tools
post #11 of 19 (permalink) Old 11-12-2018, 06:34 AM - Thread Starter
New to Overclock.net
 
Join Date: Oct 2018
Posts: 10
Rep: 0
Quote: Originally Posted by 8051 View Post
Nice job. Are you sure you can't squeeze more out of it than 2062Mhz.? Maybe by raising vcore a little higher?

I can go further than 2062mhz but the perfomance in the benchmark tests will decrease so everyone need to find the sweet point of each card.


For example with this card I could get 2112mhz BUT the performance decreased a LOT.


The highest vcore that I used was 1.09 that is the default of pascal units.

The performance decreased too.
jdcchora1533 is offline  
Sponsored Links
Advertisement
 
post #12 of 19 (permalink) Old 11-12-2018, 03:03 PM
New to Overclock.net
 
8051's Avatar
 
Join Date: Apr 2014
Posts: 2,823
Rep: 23 (Unique: 17)
Quote: Originally Posted by jdcchora1533 View Post
I can go further than 2062mhz but the perfomance in the benchmark tests will decrease so everyone need to find the sweet point of each card.


For example with this card I could get 2112mhz BUT the performance decreased a LOT.


The highest vcore that I used was 1.09 that is the default of pascal units.

The performance decreased too.
In what benchmarks did the performance decrease at 2112 Mhz. core clock as opposed to 2062 Mhz.?
8051 is offline  
post #13 of 19 (permalink) Old 11-13-2018, 04:17 PM - Thread Starter
New to Overclock.net
 
Join Date: Oct 2018
Posts: 10
Rep: 0
Quote: Originally Posted by 8051 View Post
In what benchmarks did the performance decrease at 2112 Mhz. core clock as opposed to 2062 Mhz.?

In both (timespy and superposition).


Everything have his own sweet spot... and its never the highest clock you can get.


Like another things... never what looks the best is "the best"
jdcchora1533 is offline  
Sponsored Links
Advertisement
 
post #14 of 19 (permalink) Old 11-13-2018, 10:52 PM
New to Overclock.net
 
8051's Avatar
 
Join Date: Apr 2014
Posts: 2,823
Rep: 23 (Unique: 17)
Quote: Originally Posted by jdcchora1533 View Post
In both (timespy and superposition).

Everything have his own sweet spot... and its never the highest clock you can get.

Like another things... never what looks the best is "the best"
Were you overclocking both the core and the memory when you conducted these tests?
8051 is offline  
post #15 of 19 (permalink) Old 11-13-2018, 11:40 PM
High Clocker
 
bmgjet's Avatar
 
Join Date: Nov 2011
Posts: 3,152
Rep: 188 (Unique: 162)
2062mhz on 1.062v is about right for not hitting the power limit on a stock bios.
Higher voltage or clocks will just have it hitting power limit and drop performance.

XOC bios would remove that power limit from dropping performance but it has its own issues.
Or a shunt mod.


SLI Voodoo 2 - > GeForce4 MX 420 -> GF 6600GT -> GF 6800GT -> GF 8800Ultra -> AMD 4870 -> AMD 4890 -> CF AMD 5820 -> CF AMD 6850 -> CF AMD 7970 -> SLI GF 680 -> SLI GF 780 -> CF AMD 290X -> GF 980ti -> SLI GF 980ti -> GF 1080ti -> SLI GF 1080ti -> <- RTX 2080ti (DOA/Refunded)
CPU
AMD 8120
CPU
FX 8350
GPU
7970 CFX
GPU
680 SLI
▲ hide details ▲


bmgjet is offline  
post #16 of 19 (permalink) Old 11-15-2018, 12:41 PM
New to Overclock.net
 
8051's Avatar
 
Join Date: Apr 2014
Posts: 2,823
Rep: 23 (Unique: 17)
Quote: Originally Posted by bmgjet View Post
2062mhz on 1.062v is about right for not hitting the power limit on a stock bios.
Higher voltage or clocks will just have it hitting power limit and drop performance.

XOC bios would remove that power limit from dropping performance but it has its own issues.
Or a shunt mod.
Thanks this explains what's going on perfectly. The stock VBIOS on both my Gigabyte 1080Ti Gaming OC and MSI 1080Ti Duke had really conservative power and voltage limits. I should've stuck w/those limits in the case of the Gigabyte 1080Ti Gaming OC.
8051 is offline  
post #17 of 19 (permalink) Old 06-24-2019, 02:30 PM
New to Overclock.net
 
Join Date: Jun 2019
Posts: 2
Rep: 0
Hello,

I am very new tho this. I have the same GPU as you, and want to do the Identical setup for my cooling. My questions is around the Heat sinks (again very new at this, please go easy on me), What are the sizes or your heatsink? and why is the heatsink on the top right a diff color? what type of thermal pad did you use?

I do apologize if this come across as very basic questions, its simply because I have never used heatsink or thermal pads before. The install I've watched a lot and think I can handle that. In the videos a lot of them dont use heat sinks or thermal pads for the vrams. Is this absolutely necessary?

Thanks in advance
asasivar12 is offline  
post #18 of 19 (permalink) Old 06-29-2019, 11:22 AM - Thread Starter
New to Overclock.net
 
Join Date: Oct 2018
Posts: 10
Rep: 0
Quote: Originally Posted by asasivar12 View Post
Hello,



I am very new tho this. I have the same GPU as you, and want to do the Identical setup for my cooling. My questions is around the Heat sinks (again very new at this, please go easy on me), What are the sizes or your heatsink? and why is the heatsink on the top right a diff color? what type of thermal pad did you use?



I do apologize if this come across as very basic questions, its simply because I have never used heatsink or thermal pads before. The install I've watched a lot and think I can handle that. In the videos a lot of them dont use heat sinks or thermal pads for the vrams. Is this absolutely necessary?



Thanks in advance
You can use any kind of heatsinks, I used heatsinks from raspberry pi size.

One is different because I didn't have more of the other quality.

Thermal pad very slim.

You should use it because swapping the cooler will remove some thermal pads that usually it's up there. So I recommend to use it.

Any doubt about this feel free to let me know.

Sent from my 5060D using Tapatalk
jdcchora1533 is offline  
post #19 of 19 (permalink) Old 07-14-2019, 09:04 PM
New to Overclock.net
 
Join Date: Jun 2019
Posts: 2
Rep: 0
Thanks

Quote: Originally Posted by jdcchora1533 View Post
You can use any kind of heatsinks, I used heatsinks from raspberry pi size.

One is different because I didn't have more of the other quality.

Thermal pad very slim.

You should use it because swapping the cooler will remove some thermal pads that usually it's up there. So I recommend to use it.

Any doubt about this feel free to let me know.

Sent from my 5060D using Tapatalk
Thanks for your reply, I completed the build a while ago, but have been busy and didn't have a chance to provide an update on here. I did end up using similar heat sinks to the ones you used. The process was smooth.

Had a ton of fun, my first time actually building an entire computer and I absolutely loved it.

PS. I am new to the pc community and its fantastic. Thanks again.
Attached Thumbnails
Click image for larger version

Name:	PC (3).jpg
Views:	10
Size:	2.11 MB
ID:	280436  

Click image for larger version

Name:	PC (1).jpg
Views:	11
Size:	1.16 MB
ID:	280438  

Click image for larger version

Name:	PC (2).jpg
Views:	10
Size:	1.16 MB
ID:	280440  

asasivar12 is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off