2080 Ti - Working Shunt Mod - Page 16 - Overclock.net - An Overclocking Community

Forum Jump: 

2080 Ti - Working Shunt Mod

Reply
 
Thread Tools
post #151 of 163 (permalink) Old 03-19-2020, 04:20 PM
New to Overclock.net
 
Imprezzion's Avatar
 
Join Date: Jul 2010
Location: Gorredijk, Holland
Posts: 2,738
Rep: 107 (Unique: 93)
Quote: Originally Posted by Asmodian View Post
Mine is water cooled with a EK full cover block and a crazy pump and 8x140 of radiator (with the 7900X in the same loop).

I think doubling the power limit is fine when water cooled (temps <60°C). I wouldn't run furmark though. No idea on actual risk, I don't have anything but anecdotes that make it seem pretty safe if temps are kept low. The card still throttles for temperature too so anecdotally more power is probably not that dangerous, only upping the load on the power supply. Not sure how happy a card would be with no power limit but throttling due to temperature all the time. It would probably have a short life but also likely similar to running stock power and throttling due to temps all the time, only with temperature issues being much more likely.



Personally I would use 7 mOhm resistors. You can always lower the limit below 100% with Afterburner if you need to and with a 7 mOhm mod you can explore where your limit really is. It also prevents throttling for shorter spikes, as long as your game does not run at 100% power all the time. Even 12 mOhm is well above the limit of the heatsink, assuming you keep the same BIOS, and once you go above the watt capability of the cooling system temps go up fast. How are your temps now?
It's sitting in the mid to high 50's in Modern Warfare Warzone which maxes the current power limit pretty well between 114-124% constantly. It's at 1950Mhz @ 1.043v with 8000Mhz memory (memory clock impacts power quite a lot.

If I loop Superposition 1080p Extreme which just slams 124% power constantly it flatlines at 62c.

My fan setup is quite Frankenstein. I got a Accelero IV on it with 2 Cooler Master MF140 RGB fans mounted to it and a whole load of Enzotech copper VRAM and Alphacool copper VRM heatsinks.

The fans PWM control wires and RPM wires are connected to the card, the 12v and - to my motherboard to not blow up the cards fan controller.

It sits at about 44-47% fanspeed which is around 850-900RPM. The fans are capable of 1550RPM full throttle and that drops temps like a rock but gets loud. Max comfortable noise level is around 60% @ 1200 RPM. That is low 50c territory. However, I don't know when I'm going to simply overwhelm the heatsink and at which point fanspeed won't matter anymore. I pushed 420w on a 1080 Ti with XOC unlimited BIOS on this heatsink and 420w constant load saw 70-75c on 1200 RPM.

EDIT: I can't really get 0.007 Ohm here easily at the moment. 0.01 is easier to get. Would this work for example? Any wattage that they have to have?

https://www.conrad.nl/p/ralec-lr2512...1-stuks-454377

Cars:
-Crashed: (not my fault ) '94 Nissan 100NX GA16DE (a.k.a. NX1600). Renault Laguna Phase I facelift '99 1.6 K4M. (Broke a strut and smacked a tree).
-Sold: '00 Nissan Primera P11-144 QG18DE, '97 Honda Prelude F20A4, 03 Ignis Sport.
-Current daily: '07 Ford Focus 1.6 Futura.
-Current funcars: '03 Peugeot 206CC 2.0 RFN fully riced and tuned (Turbo coming soon)
Looking for: Gen 4 or 5 Honda Prelude, >92 Toyota Celica or >90 MR2.
Full-On Rainbowbarf
(16 items)
P45 power!
(9 items)
CPU
i9 9900K @ 5.1Ghz 1.248v (VR VOut)
Motherboard
MSI MEG Z390 ACE
GPU
RTX 2080 Ti Phoenix GS + G12 & Kraken X52 @ 2130/8100 1.093v (EVGA FTW3 BIOS)
RAM
Corsair Vengeance RGB B-Die @ 4200 16-17-17-34-320-2T 1.54v
Hard Drive
Samsung 850 EVO 500GB x2
Hard Drive
Samsung 970 Evo 1TB
Power Supply
Seasonic Prime Ultra Gold 1000w
Cooling
EK MLC-Phoenix 280 Kit
Case
Phanteks Enthoo Evolv X
Operating System
Windows 10 Pro X64
Monitor
Samsung S27B350H @ 1080p 75Hz OC
Monitor
Iiyama GB2788HS @ 144Hz
Keyboard
Logitech G710+
Mouse
Trust GXT31
Mousepad
Corsair MM300 Large
Audio
Steelseries Siberia V2
CPU
Intel Core 2 Quad Q6600 G0 @ 3Ghz (333x9)
Motherboard
MSI P45 Neo2-FR
GPU
MSI GTX760 Gaming X
RAM
6GB completely random 1 and 2GB sticks. All 4 different ones.
Hard Drive
A-Data 120GB SSD
Power Supply
AOpen 350w
Cooling
Some huge aluminum Xeon heatsink
Case
Cartboard box.
Operating System
W10 Pro x64
CPU
Intel Xeon E3-1270v1 @ 3.8Ghz
Motherboard
ASUS P8H61-i R2.0
GPU
Sapphire R9 280X Vapor-X @ 1230Mhz core.
RAM
16GB Kingston HyperX Savage 2400CL11 @ 1333CL6
Hard Drive
Kingston 240GB SSD
Power Supply
Corsair CX600
Cooling
Corsair H110i GTX
Case
Custom open test bench made from a cut-up CM690 v1
Operating System
W10 Pro X64
Monitor
Samsung 23" cheap thing
Keyboard
Cheapest one Aldi had
Mouse
Cheapest one Aldi had
Mousepad
The desk...
▲ hide details ▲

Last edited by Imprezzion; 03-20-2020 at 01:58 AM.
Imprezzion is offline  
Sponsored Links
Advertisement
 
post #152 of 163 (permalink) Old 03-20-2020, 08:24 AM - Thread Starter
Robotic Chemist
 
Asmodian's Avatar
 
Join Date: Aug 2009
Location: San Jose, California
Posts: 2,776
Rep: 199 (Unique: 133)
Quote: Originally Posted by Imprezzion View Post
EDIT: I can't really get 0.007 Ohm here easily at the moment. 0.01 is easier to get. Would this work for example? Any wattage that they have to have?
https://www.conrad.nl/p/ralec-lr2512...1-stuks-454377
Those look good, the ones I used are only 1W. They dissipate very little power themselves.

Adding a 0.01 Ohm on top would give you a +66.67% power limit.

Edit: At 500W draw, with a 0.00333 Ohm total resistance (0.01 Ohm on top), both resistors together would dissipate 1.667W and most of that goes through the original one.

"Soldering resistors onto your video card to bypass the manufacturers over current protection kind-of sort-of absolute-definitely voids your warranty"
Desktop
(17 items)
CPU
Intel i9-7900X @ 4.7GHz
Motherboard
Asus Rampage VI Apex
GPU
2080 Ti
RAM
32GB DDR4 4000
Hard Drive
Intel 900P
Hard Drive
Samsung 960 Pro
Optical Drive
Asus BW-16D1HT
Power Supply
Seasonic 1200W
Cooling
EK Monoblock + GPU
Case
Old Marble Slab
Operating System
Windows 10 Pro
Monitor
LG C9 55"
Keyboard
Wooting two
Mouse
Logitech G903 Lightspeed
Mousepad
Logitech G PowerPlay
Audio
Arctis Pro Wireless
Other
Mellanox ConnectX-3 MCX354A-FCCT 40 GbE
▲ hide details ▲



Last edited by Asmodian; 03-20-2020 at 08:39 AM.
Asmodian is offline  
post #153 of 163 (permalink) Old 03-20-2020, 04:09 PM
New to Overclock.net
 
Imprezzion's Avatar
 
Join Date: Jul 2010
Location: Gorredijk, Holland
Posts: 2,738
Rep: 107 (Unique: 93)
Now all I gotta consider is whether it's worth it. I ran some tests on a lower load game that doesn't max out the power limit and set it to 1.093v in the curve and it didn't even manage 2080Mhz. 2055 on 1.093 is a maybe. It ran for a good 10 minutes and then I went and played some Warzone but then again, is shunting it worth not being able to resell it easily and barely gaining 100Mhz IF that even proves to be remotely stable. I mean, I'm at 1950Mhz @ 1.043v now with just 310w BIOS and in any game I run it stays well above 1905 most of the time only occasionally dropping to 1935/1920. This non-A is quite terrible lol. At least it has Samsung memory that quite easily does 8000+Mhz.

Cars:
-Crashed: (not my fault ) '94 Nissan 100NX GA16DE (a.k.a. NX1600). Renault Laguna Phase I facelift '99 1.6 K4M. (Broke a strut and smacked a tree).
-Sold: '00 Nissan Primera P11-144 QG18DE, '97 Honda Prelude F20A4, 03 Ignis Sport.
-Current daily: '07 Ford Focus 1.6 Futura.
-Current funcars: '03 Peugeot 206CC 2.0 RFN fully riced and tuned (Turbo coming soon)
Looking for: Gen 4 or 5 Honda Prelude, >92 Toyota Celica or >90 MR2.
Full-On Rainbowbarf
(16 items)
P45 power!
(9 items)
CPU
i9 9900K @ 5.1Ghz 1.248v (VR VOut)
Motherboard
MSI MEG Z390 ACE
GPU
RTX 2080 Ti Phoenix GS + G12 & Kraken X52 @ 2130/8100 1.093v (EVGA FTW3 BIOS)
RAM
Corsair Vengeance RGB B-Die @ 4200 16-17-17-34-320-2T 1.54v
Hard Drive
Samsung 850 EVO 500GB x2
Hard Drive
Samsung 970 Evo 1TB
Power Supply
Seasonic Prime Ultra Gold 1000w
Cooling
EK MLC-Phoenix 280 Kit
Case
Phanteks Enthoo Evolv X
Operating System
Windows 10 Pro X64
Monitor
Samsung S27B350H @ 1080p 75Hz OC
Monitor
Iiyama GB2788HS @ 144Hz
Keyboard
Logitech G710+
Mouse
Trust GXT31
Mousepad
Corsair MM300 Large
Audio
Steelseries Siberia V2
CPU
Intel Core 2 Quad Q6600 G0 @ 3Ghz (333x9)
Motherboard
MSI P45 Neo2-FR
GPU
MSI GTX760 Gaming X
RAM
6GB completely random 1 and 2GB sticks. All 4 different ones.
Hard Drive
A-Data 120GB SSD
Power Supply
AOpen 350w
Cooling
Some huge aluminum Xeon heatsink
Case
Cartboard box.
Operating System
W10 Pro x64
CPU
Intel Xeon E3-1270v1 @ 3.8Ghz
Motherboard
ASUS P8H61-i R2.0
GPU
Sapphire R9 280X Vapor-X @ 1230Mhz core.
RAM
16GB Kingston HyperX Savage 2400CL11 @ 1333CL6
Hard Drive
Kingston 240GB SSD
Power Supply
Corsair CX600
Cooling
Corsair H110i GTX
Case
Custom open test bench made from a cut-up CM690 v1
Operating System
W10 Pro X64
Monitor
Samsung 23" cheap thing
Keyboard
Cheapest one Aldi had
Mouse
Cheapest one Aldi had
Mousepad
The desk...
▲ hide details ▲
Imprezzion is offline  
Sponsored Links
Advertisement
 
post #154 of 163 (permalink) Old 03-20-2020, 04:23 PM
Overclocker
 
JackCY's Avatar
 
Join Date: Jun 2014
Posts: 10,854
Rep: 358 (Unique: 255)
Quote: Originally Posted by Ben B View Post
Very interesting, never would have guessed a 12ohm would add that much power. With all things considered, what do you think would be the highest power outputs i could push the card without going over into serious problems and risking too much of its health? crazy to think you used a 8ohm resistor. is the gpu you have being LN2 cooled ?
It's elementary school math.

I didn't think there is a need for a spreadsheet on web. Everyone just makes the calculation themselves or blind trusts what ever from internet, I prefer the first and do the calculations, check power delivery and it's capabilities from specs etc.

1/(1/R1+1/R2) = result

That's all there is to it for parallel connected resistors.

You should not attempt to solder SMDs on expensive parts unless you have some experience with soldering small components already. And in that case this whole thread is common knowledge and nothing new that a parallel resistor will change how high the power is sensed. I'm rather surprised they did not go away from the resistor sensing already, especially for these higher currents on GPUs.
JackCY is offline  
post #155 of 163 (permalink) Old 03-20-2020, 04:30 PM - Thread Starter
Robotic Chemist
 
Asmodian's Avatar
 
Join Date: Aug 2009
Location: San Jose, California
Posts: 2,776
Rep: 199 (Unique: 133)
Worth it... hmm... No, it is not worth it. It would be very hard to notice the difference in any real world workload. But this is Overclock!

That said throttling is more complex than "it says above 1905 most of the time". Throttling happens on very short timescales, the MHz you see reported is simply the average over the sampling timescale. Also, to check if you are throttling or not you need to watch the Power Limit trigger 0/1 value in Afterburner or similar. You can see stable MHz and still get very short throttling due to hitting the power limit. I do notice the difference in benchmarks too, very slightly faster with a power limit high enough to never trigger.

"Soldering resistors onto your video card to bypass the manufacturers over current protection kind-of sort-of absolute-definitely voids your warranty"
Desktop
(17 items)
CPU
Intel i9-7900X @ 4.7GHz
Motherboard
Asus Rampage VI Apex
GPU
2080 Ti
RAM
32GB DDR4 4000
Hard Drive
Intel 900P
Hard Drive
Samsung 960 Pro
Optical Drive
Asus BW-16D1HT
Power Supply
Seasonic 1200W
Cooling
EK Monoblock + GPU
Case
Old Marble Slab
Operating System
Windows 10 Pro
Monitor
LG C9 55"
Keyboard
Wooting two
Mouse
Logitech G903 Lightspeed
Mousepad
Logitech G PowerPlay
Audio
Arctis Pro Wireless
Other
Mellanox ConnectX-3 MCX354A-FCCT 40 GbE
▲ hide details ▲


Asmodian is offline  
post #156 of 163 (permalink) Old 03-27-2020, 06:43 AM
Overclocker in training
 
ThrashZone's Avatar
 
Join Date: Apr 2017
Location: Texas
Posts: 11,629
Rep: 172 (Unique: 105)
Hi,
I added just a little liquid metal so there is good contact two both shunts "and I do mean a little" and hot glued the extra shunt on the outside end just over the top and held the shunt down until the glue dried.
Works just fine and no soldering involved.
Want to remove it just use alcohol until it release the bond on the gpu board clean up a little and boom done no trace.

CPU
i9-9940x With Optimus Foundation copper-plexi and Heatkiller VRM copper-plexi water block
Motherboard
ASUS x299 Rampage VI Apex
GPU
Titan Xp with copper-plexi Water Block
RAM
Trident Z 3600C16 4x8gb's b-die default timings 16-16-16-36
Hard Drive
Samsung 970 Evo Plus 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Optical Drive
LG Blu-Ray WH16NS40
Power Supply
evga 1200-P2
Cooling
D5 pump reservoir combo/ GTX280/ VRM block/ GTX280/ D5 top/ CPU block/ GPU block/ Mora 360/ repeat.
Cooling
MO-RA3 360 PRO stainless steel (25022)
Case
corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 pro & 10 pro Win-7 Primary os.
Monitor
ASUS VG248QE 24" 144Hz
Keyboard
Logitech G910 Orion spectrum
Mouse
Redragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
Other
5.0/https://valid.x86.fr/ez2ifr
CPU
i7-5930k with Heatkiller IV Pro Plexi-Copper and koolance vrm water blocks
Motherboard
X99 Sabertooth
GPU
EVGA 1080ti FTW3 with Water block
RAM
Trident-Z 3200C14 4x8gb's b-die default timings 14-14-14-34
Hard Drive
Samsung 970 Evo 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Optical Drive
LG Blu-Ray WH16NS40
Power Supply
EVGA 1000-P2
Cooling
D5 reservior combo/ 240GTX/ Koolance VRM block/ 240GTX/ D5 Top/ CPU block/ Gpu block/ Mora 360LT/ back to reservoir
Cooling
Mora 360LT black 25000
Case
Corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 and 10 pro Win-7 Primary os.
Monitor
AOC G2460PG 24"G-Sync 144Hz
Keyboard
Logitech G710+
Mouse
Red Dragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
CPU
10900k batch # X016E724
Hard Drive
Samsung 970 evo 500gb
Power Supply
EVGA 1000P2
Case
Corsair 450D
Operating System
VapeWild RazzleBerry 50-50-0mg nic
▲ hide details ▲
ThrashZone is offline  
post #157 of 163 (permalink) Old 03-27-2020, 09:21 AM
New to Overclock.net
 
Imprezzion's Avatar
 
Join Date: Jul 2010
Location: Gorredijk, Holland
Posts: 2,738
Rep: 107 (Unique: 93)
Quote: Originally Posted by ThrashZone View Post
Hi,
I added just a little liquid metal so there is good contact two both shunts "and I do mean a little" and hot glued the extra shunt on the outside end just over the top and held the shunt down until the glue dried.
Works just fine and no soldering involved.
Want to remove it just use alcohol until it release the bond on the gpu board clean up a little and boom done no trace.
Doesn't that have a big risk of shorting the shunt and thus tripping the protection?

Cars:
-Crashed: (not my fault ) '94 Nissan 100NX GA16DE (a.k.a. NX1600). Renault Laguna Phase I facelift '99 1.6 K4M. (Broke a strut and smacked a tree).
-Sold: '00 Nissan Primera P11-144 QG18DE, '97 Honda Prelude F20A4, 03 Ignis Sport.
-Current daily: '07 Ford Focus 1.6 Futura.
-Current funcars: '03 Peugeot 206CC 2.0 RFN fully riced and tuned (Turbo coming soon)
Looking for: Gen 4 or 5 Honda Prelude, >92 Toyota Celica or >90 MR2.
Full-On Rainbowbarf
(16 items)
P45 power!
(9 items)
CPU
i9 9900K @ 5.1Ghz 1.248v (VR VOut)
Motherboard
MSI MEG Z390 ACE
GPU
RTX 2080 Ti Phoenix GS + G12 & Kraken X52 @ 2130/8100 1.093v (EVGA FTW3 BIOS)
RAM
Corsair Vengeance RGB B-Die @ 4200 16-17-17-34-320-2T 1.54v
Hard Drive
Samsung 850 EVO 500GB x2
Hard Drive
Samsung 970 Evo 1TB
Power Supply
Seasonic Prime Ultra Gold 1000w
Cooling
EK MLC-Phoenix 280 Kit
Case
Phanteks Enthoo Evolv X
Operating System
Windows 10 Pro X64
Monitor
Samsung S27B350H @ 1080p 75Hz OC
Monitor
Iiyama GB2788HS @ 144Hz
Keyboard
Logitech G710+
Mouse
Trust GXT31
Mousepad
Corsair MM300 Large
Audio
Steelseries Siberia V2
CPU
Intel Core 2 Quad Q6600 G0 @ 3Ghz (333x9)
Motherboard
MSI P45 Neo2-FR
GPU
MSI GTX760 Gaming X
RAM
6GB completely random 1 and 2GB sticks. All 4 different ones.
Hard Drive
A-Data 120GB SSD
Power Supply
AOpen 350w
Cooling
Some huge aluminum Xeon heatsink
Case
Cartboard box.
Operating System
W10 Pro x64
CPU
Intel Xeon E3-1270v1 @ 3.8Ghz
Motherboard
ASUS P8H61-i R2.0
GPU
Sapphire R9 280X Vapor-X @ 1230Mhz core.
RAM
16GB Kingston HyperX Savage 2400CL11 @ 1333CL6
Hard Drive
Kingston 240GB SSD
Power Supply
Corsair CX600
Cooling
Corsair H110i GTX
Case
Custom open test bench made from a cut-up CM690 v1
Operating System
W10 Pro X64
Monitor
Samsung 23" cheap thing
Keyboard
Cheapest one Aldi had
Mouse
Cheapest one Aldi had
Mousepad
The desk...
▲ hide details ▲
Imprezzion is offline  
post #158 of 163 (permalink) Old 03-27-2020, 12:15 PM
Overclocker in training
 
ThrashZone's Avatar
 
Join Date: Apr 2017
Location: Texas
Posts: 11,629
Rep: 172 (Unique: 105)
Quote: Originally Posted by Imprezzion View Post
Doesn't that have a big risk of shorting the shunt and thus tripping the protection?
Hi,
Depends on how well it's done.
Beats the hell out of soldering and flushing a warranty down the drain.

CPU
i9-9940x With Optimus Foundation copper-plexi and Heatkiller VRM copper-plexi water block
Motherboard
ASUS x299 Rampage VI Apex
GPU
Titan Xp with copper-plexi Water Block
RAM
Trident Z 3600C16 4x8gb's b-die default timings 16-16-16-36
Hard Drive
Samsung 970 Evo Plus 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Optical Drive
LG Blu-Ray WH16NS40
Power Supply
evga 1200-P2
Cooling
D5 pump reservoir combo/ GTX280/ VRM block/ GTX280/ D5 top/ CPU block/ GPU block/ Mora 360/ repeat.
Cooling
MO-RA3 360 PRO stainless steel (25022)
Case
corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 pro & 10 pro Win-7 Primary os.
Monitor
ASUS VG248QE 24" 144Hz
Keyboard
Logitech G910 Orion spectrum
Mouse
Redragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
Other
5.0/https://valid.x86.fr/ez2ifr
CPU
i7-5930k with Heatkiller IV Pro Plexi-Copper and koolance vrm water blocks
Motherboard
X99 Sabertooth
GPU
EVGA 1080ti FTW3 with Water block
RAM
Trident-Z 3200C14 4x8gb's b-die default timings 14-14-14-34
Hard Drive
Samsung 970 Evo 500gb M.2/ Samsung 850 Pro 256gb for os and 500gb evo for favorite games plus other wd hdd's for data and backup's
Optical Drive
LG Blu-Ray WH16NS40
Power Supply
EVGA 1000-P2
Cooling
D5 reservior combo/ 240GTX/ Koolance VRM block/ 240GTX/ D5 Top/ CPU block/ Gpu block/ Mora 360LT/ back to reservoir
Cooling
Mora 360LT black 25000
Case
Corsair 450D with added 2nd floor to house radiator on top
Operating System
Win-7 and 10 pro Win-7 Primary os.
Monitor
AOC G2460PG 24"G-Sync 144Hz
Keyboard
Logitech G710+
Mouse
Red Dragon Perdition
Audio
Built in realtek and Insignia 2.0 soundbar HSB318
CPU
10900k batch # X016E724
Hard Drive
Samsung 970 evo 500gb
Power Supply
EVGA 1000P2
Case
Corsair 450D
Operating System
VapeWild RazzleBerry 50-50-0mg nic
▲ hide details ▲
ThrashZone is offline  
post #159 of 163 (permalink) Old 03-27-2020, 12:57 PM - Thread Starter
Robotic Chemist
 
Asmodian's Avatar
 
Join Date: Aug 2009
Location: San Jose, California
Posts: 2,776
Rep: 199 (Unique: 133)
Quote: Originally Posted by ThrashZone View Post
Hi,
I added just a little liquid metal so there is good contact two both shunts "and I do mean a little" and hot glued the extra shunt on the outside end just over the top and held the shunt down until the glue dried.
Works just fine and no soldering involved.
Want to remove it just use alcohol until it release the bond on the gpu board clean up a little and boom done no trace.
Liquid metal and solder are not safe together, the liquid metal will diffuse into the solder. This can mean nothing bad will happen, or the mod could stop working randomly, or that the original shunt desolders and the entire GPU stops working (probably unlikely with a very small amount). You also don't know what your real power limit is, though that isn't particularly important. The liquid metal is also likely to stain or leave a trace after being left in place for a long time. Soldering a resistor on top is quite easy and much less likely to change over time.

The only reason I can see for not wanting to solder is to abuse the RMA if it breaks.

Edit: Your hot glue and liquid metal is almost as likely to leave a residue as solder would. I can get a very clean desolder if I spend some time cleaning it up, and you actually flushed your warranty as soon as you started modding.

"Soldering resistors onto your video card to bypass the manufacturers over current protection kind-of sort-of absolute-definitely voids your warranty"
Desktop
(17 items)
CPU
Intel i9-7900X @ 4.7GHz
Motherboard
Asus Rampage VI Apex
GPU
2080 Ti
RAM
32GB DDR4 4000
Hard Drive
Intel 900P
Hard Drive
Samsung 960 Pro
Optical Drive
Asus BW-16D1HT
Power Supply
Seasonic 1200W
Cooling
EK Monoblock + GPU
Case
Old Marble Slab
Operating System
Windows 10 Pro
Monitor
LG C9 55"
Keyboard
Wooting two
Mouse
Logitech G903 Lightspeed
Mousepad
Logitech G PowerPlay
Audio
Arctis Pro Wireless
Other
Mellanox ConnectX-3 MCX354A-FCCT 40 GbE
▲ hide details ▲



Last edited by Asmodian; 03-27-2020 at 01:02 PM.
Asmodian is offline  
post #160 of 163 (permalink) Old 05-22-2020, 07:56 AM
New to Overclock.net
 
Join Date: Dec 2019
Posts: 4
Rep: 0
Modders beware

Just my two cents, I replaced my resistors with 8 mOhm and had in a water loop for 6 months but it popped today.
Going to frame it and put it on the wall.
Modders beware.
idontbyte is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off