[Official] NVFlash with certificate checks bypassed for GTX 950/960/970/980/980Ti/Titan X - Page 70 - Overclock.net - An Overclocking Community

Forum Jump: 

[Official] NVFlash with certificate checks bypassed for GTX 950/960/970/980/980Ti/Titan X

Reply
 
Thread Tools
post #691 of 960 (permalink) Old 08-15-2016, 09:02 PM
Just another nerd
 
Sheyster's Avatar
 
Join Date: Aug 2009
Location: So-Cal, U.S.A
Posts: 5,270
Rep: 332 (Unique: 238)
Quote:
Originally Posted by Orbmu2k View Post

@Sheyster:

i attached an unsigned bios dump from Titan X(P)

gp102_vbios.zip 145k .zip file

Not sure if I can use this. The size seems a bit off and the header looks a lot different than the GP104 BIOS files I have.

CPU: intel Core i9 9900K - 5 GHz x 8 cores - HT on - 1.26v - Air cooled
MOBO: Gigabyte Z390 Aorus Pro
GPU: MSI Duke OC RTX 2080 Ti - 380w PL BIOS
RAM: G.Skill 32GB DDR4 3200 CL14 @ 3600 CL15 (Samsung B-die)
SSD: Samsung 970 EVO 1TB M.2 NVMe
PSU: EVGA SuperNOVA 1000 G3
CASE: "Open bench" - Stripped down Tt Core X9
Sheyster is offline  
Sponsored Links
Advertisement
 
post #692 of 960 (permalink) Old 08-15-2016, 09:29 PM
New to Overclock.net
 
Join Date: Nov 2009
Location: µcode
Posts: 715
Rep: 56 (Unique: 46)
Quote:
Originally Posted by Orbmu2k View Post

@Sheyster:

i attached an unsigned bios dump from Titan X(P)

Does this mean inspector support? biggrin.gif

ucode is offline  
post #693 of 960 (permalink) Old 08-16-2016, 01:13 AM
New to Overclock.net
 
Orbmu2k's Avatar
 
Join Date: Mar 2013
Posts: 10
Rep: 3 (Unique: 3)
Quote:
Originally Posted by Sheyster View Post

Not sure if I can use this. The size seems a bit off and the header looks a lot different than the GP104 BIOS files I have.

as mentioned this bios is "unsigned", just a dump for analysis, not for flashing

Quote:
Originally Posted by ucode View Post

Does this mean inspector support? biggrin.gif

nope
Orbmu2k is offline  
Sponsored Links
Advertisement
 
post #694 of 960 (permalink) Old 08-16-2016, 08:18 PM
Just another nerd
 
Sheyster's Avatar
 
Join Date: Aug 2009
Location: So-Cal, U.S.A
Posts: 5,270
Rep: 332 (Unique: 238)
Quote:
Originally Posted by Orbmu2k View Post

as mentioned this bios is "unsigned", just a dump for analysis, not for flashing

I appreciate it. It may actually be helpful. I'm in the process of comparing it to a couple of GP104 saves that I have.

CPU: intel Core i9 9900K - 5 GHz x 8 cores - HT on - 1.26v - Air cooled
MOBO: Gigabyte Z390 Aorus Pro
GPU: MSI Duke OC RTX 2080 Ti - 380w PL BIOS
RAM: G.Skill 32GB DDR4 3200 CL14 @ 3600 CL15 (Samsung B-die)
SSD: Samsung 970 EVO 1TB M.2 NVMe
PSU: EVGA SuperNOVA 1000 G3
CASE: "Open bench" - Stripped down Tt Core X9
Sheyster is offline  
post #695 of 960 (permalink) Old 08-17-2016, 04:10 AM
New to Overclock.net
 
Join Date: Nov 2009
Location: µcode
Posts: 715
Rep: 56 (Unique: 46)
Quote:
Originally Posted by Orbmu2k View Post

nope
Shame, it's a nice clean program.

@Sheyster, here's a later version 5.306 you could try perhaps.

nvflash5.306.zip 1307k .zip file
Attached Files
File Type: zip nvflash5.306.zip (1.28 MB, 71 views)

ucode is offline  
post #696 of 960 (permalink) Old 08-18-2016, 10:43 AM
New to Overclock.net
 
Juhastinen's Avatar
 
Join Date: Sep 2014
Posts: 3
Rep: 0
edit: never mind, just saw that other have the same issues and tried newest nvflash posted before me, thanks anyway rolleyes.gif


Hoy guys, I tried couple different bios for MSI 980Ti 6G gaming and i did a backup of original bios with GPU-Z.
Now i cant restore the original bios with nvflash v5.287, should i use some different command than "nvflash -6 *.rom" to restore the original bios?

this is what i get:

Checking for matches between display adapter(s) and image(s)...

Adapter: GeForce GTX 980 Ti (10DE,17C8,1462,3232) H:--:NRM S:00,B:01,D:00,F:00

WARNING: Firmware image PCI Subsystem ID (1462.3233)
does not match adapter PCI Subsystem ID (1462.3232).

Please press 'y' to confirm override of PCI Subsystem ID's:
Overriding PCI subsystem ID mismatch
Current - Version:84.00.36.00.07 ID:10DE:17C8:1462:3232
GM200 Board (Normal Board)
Replace with - Version:84.00.41.00.2D ID:10DE:17C8:1462:3233
GM200 Board (Normal Board)

Update display adapter firmware?
Press 'y' to confirm (any other key to abort):
The display may go *BLANK* on and off for up to 10 seconds or more during the update process depending on your display adapter and output device.

Identifying EEPROM...
EEPROM ID (C2,2012) : MX MX25L2005 2.7-3.6V 2048Kx1S, page

BCRT Error: Certificate 2.0 verification failed

ERROR: BIOS Cert 2.0 Verification Error, Update aborted.



why i doesnt accept the 84.00.41.00.2D even thats the original bios?
Juhastinen is offline  
post #697 of 960 (permalink) Old 08-18-2016, 11:34 PM
New to Overclock.net
 
nankura's Avatar
 
Join Date: May 2011
Posts: 5
Rep: 1 (Unique: 1)
Hey guys

I recently bought an MSi GTX 1060 6GT https://www.msi.com/Graphics-card/GeForce-GTX-1060-6GT-OC.html#hero-overview

And when installing the card. everything runs fine accept for fan speed, the fan speed is locked at 49%, you cant go LOWER than 49% in afterburner, ive tried fan curves, manual, everything, i cannot get the fans to go lower

I contacted MSi and they were less then helpful

I was wondering if its possible that this might be a bios fan lock and if it can be removed.
nankura is offline  
post #698 of 960 (permalink) Old 08-26-2016, 07:46 AM
Linux Lobbyist
 
MikeSanders's Avatar
 
Join Date: Sep 2012
Posts: 24
Rep: 2 (Unique: 2)
Quote:
Originally Posted by ucode View Post

@Sheyster, here's a later version 5.306 you could try perhaps.

nvflash5.306.zip 1307k .zip file

Is this working with the TX Pascal? Anyone tried to flash a card?
MikeSanders is offline  
post #699 of 960 (permalink) Old 08-31-2016, 03:23 AM
Linux Lobbyist
 
MikeSanders's Avatar
 
Join Date: Sep 2012
Posts: 24
Rep: 2 (Unique: 2)
Can anyone of you get the new nvflash version? It's nvflash 5.315. I couldn't find it so far.
MikeSanders is offline  
post #700 of 960 (permalink) Old 09-04-2016, 02:23 AM
New to Overclock.net
 
OptimIShPr1m3's Avatar
 
Join Date: Aug 2015
Location: Texas
Posts: 18
Rep: 0
I tried going from one custom rom to another, and now I'm pretty sure my card is bricked. I had read in a post that the latest nvflash did not require you to disable the adapter in device manager, so I did not worry about trying. I ran: nvflash -6 *****.rom and the cmd window just hung for a few minutes. I ended up just alt+f4'ing. I rebooted and monitor gets no signal and turns off. Boot into windows using igfx, and nvflash can see my 980ti, but will not flash anything to it. It says the eeprom is erased. I tried downloading a stock rom, but nothing flashes to it. I tried going into dos from a usb boot, and nvflash says no nvidia adapters found.

My card is Zotac 980ti Amp! Extreme.

Edit: I used nvflash 5.292 and it worked. I was scared poopless for like an hour, haha.
OptimIShPr1m3 is offline  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off