[Official] - X58 Xeon Club - - Page 1548 - Overclock.net - An Overclocking Community

View Poll Results: How many years have you owned your X58 - Tylersburg platofrm?
More than 1 year 75 11.94%
More than 2 years 33 5.25%
More than 3 years 46 7.32%
More than 4 years 61 9.71%
More than 5 years 118 18.79%
More than 6 years 295 46.97%
Voters: 628. You may not vote on this poll

Forum Jump: 

[Official] - X58 Xeon Club -

Reply
 
Thread Tools
post #15471 of 15521 (permalink) Old 07-30-2020, 01:45 PM
New to Overclock.net
 
Join Date: Apr 2020
Posts: 130
Rep: 0
Quote: Originally Posted by BOBKOC View Post
+3tertiary timings
This been stable for 50 mins, do you mean these are CL related at all?
PotatoVonEpicus is online now  
Sponsored Links
Advertisement
 
post #15472 of 15521 (permalink) Old 07-30-2020, 02:36 PM
New to Overclock.net
 
Join Date: Mar 2020
Posts: 24
Rep: 0
Quote: Originally Posted by PotatoVonEpicus View Post
This been stable for 50 mins, do you mean these are CL related at all?
oops 5->4 for tRTP &tCL=8 and tRTP=5&tCL=9
8-9-9-22|-32-4-4-8-Avto-7(or 6)-200-4-16-1|
8-9-8-22|-32-4-4-8-Avto-7(or 6)-200-4-16-1|
8-8-8-22|-32-4-4-8-Avto-7(or 6)-200-4-16-1|

Last edited by BOBKOC; 07-30-2020 at 02:40 PM.
BOBKOC is offline  
post #15473 of 15521 (permalink) Old 07-30-2020, 02:55 PM
New to Overclock.net
 
Join Date: Oct 2018
Posts: 22
Rep: 0
Quote: Originally Posted by PotatoVonEpicus View Post
https://www.anandtech.com/show/2869/...e-6-updated-/6

I don't think its RTL, but rather something wrong with your CPU.
For some reason it worked but the RTL is too high. I'm already at 81 with 3600 uncore, make that 3580 to be exact. In any case, I'm happy with this just for my daily driver til I can upgrade later this year.
realcapone is offline  
Sponsored Links
Advertisement
 
post #15474 of 15521 (permalink) Old 07-30-2020, 09:53 PM
 
xxpenguinxx's Avatar
 
Join Date: Jun 2010
Posts: 2,406
Rep: 73 (Unique: 59)
Quote: Originally Posted by realcapone View Post
How do I get the right value for it? I always put this on auto so I'm not sure what the actual value is.

Update: I managed to get the value from Aida64 and increased it by 2 and man oh man you are a lifesaver. It worked! Why would that be? Really weird coming from the same board with just a different revision.
The bios is probably not fully tuned for the Xeons memory controller. I noticed mine would set it too low for Samsung based RAM.

Here's a formula for finding the right values. It's not 100% accurate but it will get you close enough. Mine comes out to about 58, and my bios auto sets Ch1. 56, Ch2. 59, and Ch3. 60.

For MemFreq use the bandwidth not the clockrate. So for DDR3 1600, use 1600, not 800.

http://i4memory.com/showthread.php?t=24362
Attached Thumbnails
Click image for larger version

Name:	RTL4.jpg
Views:	6
Size:	15.2 KB
ID:	363224  


Going Blue
(20 items)
My Minecraft Box
(14 items)
CPU
Xeon X5690
Motherboard
EVGA 132-BL-E758
GPU
Gigabyte GTX 1080 G1 Gaming
RAM
Crucial Ballistix Tactical 3x8GB
Hard Drive
Kingston V300 120GB
Hard Drive
Seagate Sata II 1TB
Hard Drive
WD Sata II 500GB
Hard Drive
Crucial MX200 500GB
Hard Drive
Samsung 960 EVO 500GB
Power Supply
Seasonic SS-660XP2
Cooling
EK-KIT L360
Case
NZXT H440 White
Operating System
Windows 7 Ultimate SP1 64bit
Monitor
AOC Agon AG271QX
Keyboard
IBM Model M
Mouse
Logitech g400
Mouse
SteelSeries QcK
Audio
HD598
Other
CyberPower PFC
Other
MNPA19-XTR 10gb
CPU
Intel Xeon X5650
Motherboard
Asus Rampage II gene
GPU
Radeon HD 2400
RAM
Crucial Balistix DDR3 1600 16GB
Hard Drive
500GB WD
Hard Drive
3TB Seagate Barracuda
Hard Drive
Crucial MX200 250GB
Hard Drive
4TB Seagate
Power Supply
Seasonic G Series 550W
Cooling
Phanteks PH-TC12LS
Case
Fractal Design ARC MINI
Operating System
Windows 2008 R2 SP1
Other
Intel E1G44ET2 Gigabit Ethernet Card 4 x RJ45
Other
Mellanox ConnectX-2 MNPA19-XTR
▲ hide details ▲
xxpenguinxx is offline  
post #15475 of 15521 (permalink) Old 07-30-2020, 11:34 PM
New to Overclock.net
 
Join Date: Apr 2020
Posts: 130
Rep: 0
Quote: Originally Posted by BOBKOC View Post
oops 5->4 for tRTP &tCL=8 and tRTP=5&tCL=9
8-9-9-22|-32-4-4-8-Avto-7(or 6)-200-4-16-1|
8-9-8-22|-32-4-4-8-Avto-7(or 6)-200-4-16-1|
8-8-8-22|-32-4-4-8-Avto-7(or 6)-200-4-16-1|
Only 8-9-9-22-176-1T boots and seemingly works fine with Prime95. I also thought all my sticks were CL9, but apparently Kingston HyperX was CL10.

Sticks I use - https://www.amazon.com/Corsair-CMZ16.../dp/B0085IWXB8 - could only find this on their site -

https://www.corsair.com/eu/en/Catego...tab-tech-specs , same specs though.

And - https://www.kingston.com/en/memory/s...HX316C10FB%2F8

++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++++++++++++++++++++++

4 ~ hours of Prime95 and around 1 hour and 20 minutes of MemTest86, I would dare to say this will be stable.

Last edited by PotatoVonEpicus; 07-31-2020 at 02:49 AM.
PotatoVonEpicus is online now  
post #15476 of 15521 (permalink) Old 07-31-2020, 07:40 AM
New to Overclock.net
 
nofearek9's Avatar
 
Join Date: May 2019
Posts: 124
Rep: 1 (Unique: 1)
anyone with XMS3 8GB C11 sticks ? What are you timings ?

Asus Rampage IV Black Edition,Intel Xeon [email protected],7ghz,Corsair XMS3 64GB DDR3(8x8),Samsung 950 PRO 256GB,EVGA GeForce RTX 2070 XC GAMING 8GB,Lian Li PC-60FNWB ,Corsair Gold AX750PSU,Noctua NH-D15 .
Asus Rampage III Gene,Intel Xeon [email protected] 4,5ghz,Corsair XMS3 48GB DDR3(6x8),Samsung 950 PRO 256GB,ASUS GT 1030 OC.
Register your evga products.
Buy evga products with discount 5%-10%
nofearek9 is offline  
post #15477 of 15521 (permalink) Old 08-01-2020, 12:34 PM
New to Overclock.net
 
Join Date: Apr 2020
Posts: 130
Rep: 0
I wonder if I could get CL7 with more voltage, 1.66v didn't seem to work though.

BOBKOC, what timings do you run with 2100 ~ MHz?

Last edited by PotatoVonEpicus; 08-01-2020 at 01:13 PM.
PotatoVonEpicus is online now  
post #15478 of 15521 (permalink) Old 08-01-2020, 11:56 PM
New to Overclock.net
 
Join Date: Apr 2020
Posts: 130
Rep: 0
1580 MHz - 2170 MHz, latency compared.
Attached Thumbnails
Click image for larger version

Name:	1580.png
Views:	6
Size:	31.6 KB
ID:	363562  

Click image for larger version

Name:	2170.png
Views:	5
Size:	31.8 KB
ID:	363564  

PotatoVonEpicus is online now  
post #15479 of 15521 (permalink) Old 08-02-2020, 10:59 AM
New to Overclock.net
 
Martin778's Avatar
 
Join Date: Feb 2012
Location: Central EU
Posts: 1,591
Rep: 17 (Unique: 17)
The results of dual OC'ed X5690's vs R5 3600 vs TR 3960X are in boys! No idea what's happening in the Night Raid test, re-ran it 2 times and got identical results.
Finally found a powerful card that would run on all these systems - Titan Xp. No mods, just increased fan curve to prevent thermal throttling on the card.

I will add stock X5690 / 1333 C9 results too. Anyways, my conclusion is - LGA1366 is still perfectly usable but not worth buying anymore, no matter how cheap. A weak R5 3600 PBO with 3200CL16 E-Die's rips a heavily tweaked SR-2 apart. 3600 idles at 70-90W, the SR-2 at 250-270W.
Attached Thumbnails
Click image for larger version

Name:	oqN49LRZeI.png
Views:	10
Size:	40.6 KB
ID:	363698  


Threadripper 3960X @ broken PBO EDC=40 | Aorus TRX40 Xtreme | Enermax Liqtech II 360 TR4 + EK Clear flush + 3x Noctua A12x25 | 4x8GB G.Skill TridentZ Neo 3800C14 @ 3733 CL14-15-15-30 CR1 | EVGA Kingpin 2080Ti @ 2115MHz / 8250MHz + Noctua A12-25 | 4x1TB 970 PRO raid0 | Corsair MP600 2TB | Seasonic Prime Platinum 1300W | In Win D-Frame 2.0 Gold | ASUS PG349Q

Last edited by Martin778; 08-02-2020 at 11:08 AM.
Martin778 is offline  
post #15480 of 15521 (permalink) Old 08-02-2020, 11:23 AM
New to Overclock.net
 
Join Date: Apr 2020
Posts: 130
Rep: 0
"My conclusion is - LGA1366 is still perfectly usable but not worth buying anymore, no matter how cheap." This is spot on, there also is a good chance to extract quite a bit of performance going higher with clocks, however practically it's not worth it. Especially seeing TDP and prices for x58 boards.
PotatoVonEpicus is online now  
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 2 (1 members and 1 guests)
PotatoVonEpicus
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page


Forum Jump: 

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off