|Topic Review (Newest First)|
|06-21-2020 01:06 PM|
|agentx007||SLBBE, because with E0 you have a lower chande of getting a "dud" for OC (and they should be less leaky/require slightly less Vcore for given frequency/may work with higher FSB better).|
|06-20-2020 08:27 AM|
decided to "revive" my old dusty P5Q Pro that ran e8400, with some Xeon X5450 from Ali and donate it
the question is SLBBE or SLASB and why?
|05-27-2020 02:59 PM|
|agentx007||I use those : https://genius239239.neocities.org/771/asus.htm|
|05-25-2020 11:40 AM|
Hello, I've a P5Q PRO from 2008 and now a XEON,
is possible to have a good bios with microcode?
Thank You very much
|05-15-2020 01:39 PM|
It will work.
You will need Clover or DUET to boot from it though.
|05-13-2020 08:59 PM|
|minivanracer||Hi, I know this thread hasn't been updated in over a year, but I'm looking for info on if you can configure the p5q pro turbo to boot from an ssd installed in a pcie slot. I'm thinking of purchasing an m.2 drive and an adapter to try and get a faster drive connection. I'd be happy with the sata II ssd but a m.2 drive and adapter are about the same price as the sata ssd so I figured I'd see if it's possible.|
|09-11-2019 05:43 AM|
|Milan SERBIA||HI ALL, l need help l wont to buy 775 motherboard with ddr3 ram memory to can put my parts sapphire r9 270x and xeon x5460|
|08-25-2019 04:07 PM|
Hello, after updating my bios to an older version using the usb the pc won't post anymore, no beep no display, fan spins green light.
Is there any way to flash the bios without getting a new bios chip?
|07-19-2019 03:26 PM|
|Milan SERBIA||Always is but what is better for my dimensions l have ms aqarius pro to put air coller with radiotor max is 240mm that is two fan 12cm 24cm or air coller with dimension 160mm,these only l have in my contry ANTEC,THERMALTAKE,LC-POWER,COLLER MASTER,DEEP COOL,(now l use fsp windale 6 its to large for my case) that all coller is 160mm or less for water l dont no what is best with 240mm dimensions,please help me with this l have and dominator 1066mhz ddr2 2gb x4modul ram memory,to oc xeon and to have best colling system,water system only no nzxt and corssair that is not way to mount on 775socket|
|07-14-2019 12:00 AM|
l using now x5460 this cpu is beast to you know all score in benchmark r15 is 320 when set up to 3.8ghz its 420 score vcore 1.312 temp 70max l use now new case with six fans noctua 3000rpm all six and l buy new coller and put noctua on him because my case only 160mm max height coller
Sent from my SM-S767VL using Tapatalk
|This thread has more than 10 replies. Click here to review the whole thread.|