|Topic Review (Newest First)|
|09-13-2019 12:09 PM|
|08-28-2019 07:38 PM|
Long-time no posting on this thread... as today the system, in general, have been solid, with some weird hangs on some cold boots (boots enter to windows desktop and hangs) I havent had any time to troubleshoot it correctly, right now using Bios 1701 and I'm planning on to update to the latest one 2001 also one minor but annoying problem is that (dumb me for playing with the aura software update) I have updated to the latest Aura and Live Dash version and the Live dash keep crashing I manage to at least open the Live Dash (had to roll back to a previous version and re install) but now it does not do anything (no matter what version) the program does not change the actual information showed on the display (stuck on CPU temp small text). I will try the new bios and see if that somehow unstuck the Live Dash...one thing I notice is when you install Aura Sync and then the live dash this update the Aura Services and then the chaos of this two programs start.
Some combinations of the aura sync + live dash make one or the other to crash on program launch
Right Know I'm using:
Aura Sync Version 1.07.57 - latest (working can change colors etc)
Aura Service 3.03.39 - latest (included with the Aura Syn Version 1.07.57 under Lighting Control Folder)
Live Dash 1.05.03 - latest (open and not crash but the changes do not apply to the actual live oled display)
Also on the Asus support page for the ZE at the bottom, we have this
Utilities: AURA Lighting Control
New DRAM Support
1. AITC RAPIDEZ RGB
2. VENGEANCE® RGB PRO
3. DOMINATOR® PLATINUM RGB
that Lighting control version includes the Aura Service version 3.03.56
I have tried installing that Aura Service (3.03.56) and the same problem...
Any lights on this? I will know update to latest bios and see if this make any change.
|08-19-2019 07:47 AM|
|ManMountain||Settings tried increased voltage to DIMM slots? With 1901 / 2001 BIOS all I do is select memory frequency of 3200MHz and set voltage @ 1.25V for DRAM AB and CD. I use Kingston HyperX Predator 32GB (HX433C16PB3K4/32) and probably could squeeze better timings.|
|08-19-2019 07:32 AM|
|Jacob Smith||Hi folks! Recently bought a ZE and had to flash the bios with 2001 to get my 2080ti to work. When i try to adjust the ram settings the system keeps rebooting until i power off and reset the bios. No matter what settings i use the system hangs and im stuck at 2133. The ram i am using is corsair vengeance rgb pro ( CMW32GX4M4C3600C18 ) which i assumed would work with the latest bios. I am quite frustrated atm and would greatly appreciate any help!|
|08-19-2019 06:08 AM|
|adam3234||When I use the NF-A15 fan (the ones used for Noctua NH U14S TR4-SP3 coolers) with the cpu_opt header on the Zenith Extreme, the fan creates an annoying high pitch noise when the CPU is under high load or when I set it to spin at full speed in the bios however when only the Zenith Extreme's cpu_fan header is used, the NF-A15 is quiet even when I set the fan speed to max. Is this normal? There's something else I find strange, the extra NF-A15 fan that I bought that didn't come with the cpu cooler runs at 1200 rmp max while the NF-A15 fans are suppose to operate at 1500 rpm. The NF-A15 that came with the cooler works fine and runs at 1500 rpm max. It doesn't matter which of the 2 fans I use with the cpu_opt header, they both make annoying high pitch sound but when either fan is used with the cpu-fan header both or them are quiet even when at max rpm.|
|08-16-2019 01:50 AM|
2001 is acting the same as most of the other BIOS....I've had zero problems on any of them and the same blistering performance for my RAM...24/7 rock solid stable...I guess I lucked out with my components or something
|08-14-2019 09:07 PM|
|08-14-2019 06:40 AM|
|Arne Saknussemm||2001 is working fine for me so far...|
|08-13-2019 07:28 AM|
Asus released a new Bios Today.
Did someone already test it?
2019/08/08 (5.61 MBytes)
ROG ZENITH EXTREME BIOS 2001
1 Improve ezflash functionality
2 Improve memory stability“
Maybe they prepare for TR Gen 3?
I don't know... but I'll flash it and see if any agesa changes happened...
Has anyone already flashed and tested?
EDIT: I just flashed the new BIOS and there seems to be no agesa changes whatsoever. I'll try to bump my memory overclocks and see if there has been an improvement.
AGESA version is the same like you said so no preliminary support for TR3.
|08-12-2019 07:35 AM|
|MacMus||so what mem stabiity means?|
|This thread has more than 10 replies. Click here to review the whole thread.|