|Topic Review (Newest First)|
|01-18-2020 05:21 PM|
|boostedevo||Looks like some had trouble with push pull on top radiator and others didn’t? I was able to fit push pull with an xt45 in the primo and hoping I can do the same with the elite. Can anyone confirm a 45 fits on top in push pull?|
|07-21-2019 03:27 AM|
|Zergoras||My tuning is done, way better than the last one but still not perfect. Next time maybe hard tubes.|
|06-29-2019 09:14 AM|
Im going to optimize my build with some 90 degree fittings and stuff so that the tubes fit a bit better. I need to drill two holes in the big midplate, how do you recommand doing that without damaging the plate?
Im also thinking about putting in one more radiator and maybe one thicker one at the bottom. Did any of you put a 360mm rad on the side panel? Im just wondering if im able to place my reservoir next to it.
I have one 30mm 480mm rad on the bottom and one on the top. Do you think it would help my temperatures a bit if im going to upgrade to a thicker one (60mm)at the bottom? Would adding a 30mm 360mm rad improve it even more? The side one would be a no brainer if it would fit. Im not wanting to put a rad in the front because of the temps rising inside the case. Im right now using a 1080ti and a i7 7820X. I have a temp delta under full load around 12k (room to water temp). Going to upgrade soon to a 2080ti and maybe a Ryzen 3950X.
|06-13-2019 12:18 AM|
|KCDC||Starting to get somewhere happy with my build, still finishing wiring and led layout, some wires still showing. Added a Commander Pro to the mix, keeps my fans nicely humming off water temp. No more rpm spikes! Couldn't help but add their addressable LEDs to the mix for some fun. This case really is a pleasure to work with. Playing with more LED profiles now that I have a hang of iCue. Might get new pcie and 24 pin cables, I can't get these cablemods to straighten out. 80% there, enough to finally post a pic or two.|
|05-02-2019 07:27 AM|
I am debating between this or the Corsair 1000D. Would love to hear your opinion on which one you would choose
On my side, I have chosen the 1000D, mainly because I'll have a mini itx and a Eatx setup, and I can drop enough radiator inside while still getting fresh air moving in without going through a radiator (because of the dual line of fans you can put on the front)
So two very very different tower, if you don't need dual setup, and money is not an object, I think the Elite is of better quality overall.
|04-22-2019 09:23 AM|
Disregard. Direct messaged them on Facebook and they promptly responded to say there's more coming in May.
|04-08-2019 04:43 AM|
|04-07-2019 09:20 PM|
|04-07-2019 08:01 PM|
|erikbarone||I am debating between this or the Corsair 1000D. Would love to hear your opinion on which one you would choose|
|03-04-2019 08:16 PM|
Sent from my iPhone using Tapatalk
|This thread has more than 10 replies. Click here to review the whole thread.|