|Topic Review (Newest First)|
|07-07-2020 01:17 PM|
I have tried to contact Galax this month, due their website.
I got no reply for 10 days, their distribution network in EU this is dead, they hide even their physical address.
It makes you wonder of why people buying unsupported products.
|06-30-2020 11:57 AM|
|06-27-2020 10:53 AM|
j'ai récupérer une GTX 970 Galax HOF et il n'y a que 2 ventilateurs qui tournent, je ne suis pas sur que les ventilateurs sont d'origine, en regardant sur internet j'ai vu plusieurs combinaison de ventilation, quelqu'un pourrais me dire comment est la ventilation d'origine s'il vous plais, et si il y a une solution au problème, merci
|06-08-2020 11:48 PM|
So I recently obtained a KFA2 GTX 560 Ti White/HOF, delidded it, the heatsink fits like a glove. Got a temperature drop from 86°C to 64°C with a much lower fanspeed!
The VRM on it is absolutely amazing! For a 6phase it barely produces any heat!
It's a lovely card to play with too, at 1.112v it does 1080MHz on the core, memory maxes out at around 2550MHz, hynix memory on this particular one.
I've been scouring the internet to find any information about the J11 connector and the SW1 dip switch and so far I've found the J11 connector is used to connect to the GALAXY OC PANEL allowing you to manually dial in VID tables and voltage offsets (Pic4). So basically the J11 is useless without it
I haven't found any information on the Dip switch tho and I haven't touched it yet. Could it be for Temp shutdown like on the newer models?
When the winter comes I'm gonna mount a universal GPU block on it and take it for a spin
|05-14-2020 10:13 AM|
2160/16400 in the air where it is not even the limit of this GPU in these conditions.
Interestingly, even after the bios reflash and plays with other bioses, all sort settings and max TDP near still around 280W. I suspect three options:
1.Nuts ;-) from GALAX is the way the GPU designed that softs do not want to give the value well.
2.I have a bug with PT and grandpa doesn't want to get up
3.The problem with the good separation of the 12v line from the PSU, I will try diff.
The card is connected, of course, with separate 12v from PSU 3x8 PIN.
Have you met any of you with such a problem of sensors for indicating GPU current consumption in GPU-Z and HWinfo 64?
|05-14-2020 07:57 AM|
Hi. I have a strange behavior of card. For example in MSI AB or HOF AI / XtremeTuner I give max PT and core clock + 150. mem clock + 1000. It's in 3DM FSE / FSU, Time Spy Extreme, games etc. GPU doesn't pull more than 280W.
G-Sync / Vsync off.
RTX 2080 Ti HOF 10 TH OC Lab Edition.
Test bench spec :
i9-7980XE 4.8 GHz + 3.2 mesh
X299 Rampage Extreme VI Encore
32 GB DDR4. Trident Z Royale 3800 MHz Cl16.16.16.T1 tRFC 340
Corsair AX 1500i
GPU connected of course via 3x 8 PIN
|04-11-2020 05:16 AM|
Hello,can you help me to find HOF_NVVDD for gtx 1080?
I want to unlock voltage limit.
|02-08-2020 06:16 PM|
|sultanofswing||Is there anyone here that might possibly have the newest version of the HOF 2080ti XOC Bios? I have an older version but cannot for the life of me find a newer version.|
|02-06-2020 12:40 AM|
What else you got in that magic folder?
I am having some problems with this board, and debugging is hard with just guessing
The board i have is the one in the first picture. It has 2 jumpers which say 1-2 : PciE, 2-3 : 8P. I guess they select power source. The weird thing is, if i select 8P (8 pin power) on the jumpers, the board throttles severely. In Furmark, GPU stays at around 600-700 Mhz, throttle reason is power, and power consumption is at 38 % TDP. This is weird, performance is awful.
Any more info on this? Does anyone have original BIOS for this board?
|02-05-2020 10:41 PM|
|This thread has more than 10 replies. Click here to review the whole thread.|