|Topic Review (Newest First)|
|04-02-2020 07:15 AM|
Struggling with Bios Flash Please Help
So I decided to go ahead with a Bios Flash on my Titan X following this guide>> https://www.overclock.net/forum/69-n...970-980-a.html <<
Everything seemed to go as explained in the tutorial although it only asked me to press "y" once on the CMD prompt. After this I typed exit, Hit enter, Re-enabled the display driver and rebooted.
This is where I'm hitting a problem. my computer is powering up but i am getting a black monitor screen, no signal any advice would be much appreciated
|04-02-2020 05:34 AM|
Is it worth flashing my Titan X?
Hi guys I have just picked up a Titan X(Maxwell) and am wondering if i will get much of an increase in performance with a custom bios? I'm currently getting these stats with a max overclock on MSI Afterburner running Heaven>>>http://gpuz.techpowerup.com/20/04/02/2cw.png<<<
Any advice would be great! Thanks ChairmanTv
|02-06-2020 05:20 PM|
Anyone upgrade from TX Maxwell to the newer 2080 Ti? I recently bought an Asus PG279Q 1440p 165hz monitor. Most games i can only get around 100-120fps, and was looking to upgrade so i can take full potential of the 165hz.
I game at 3440 x 1440 and I went from two water cooled TXM in SLI @ 1514 Mhz core and 2000 Mhz memory to a single 2080Ti (Asus ROG Strix on air cooler) and the difference in games that didn't properly use the 2nd card are generally double the fps or more.
In games that used the 2nd Titan, they were roughly on par with each other.
Older benchmarks that use both card effectively and aren't based on DX12 or Vulkan, the Titans are about 10 - 20% faster.
|02-06-2020 04:53 PM|
Just curious if any others are having issues with the new drivers looking these cards down to only 1000mhz? I use to run my card at 1400mhz and now i can not lock the card with kboost or even manually get the card to clock any higher. With furmark running i can slide the mhz slider and no matter what happens the card never goes above 1ghz.. extremely frustrating and i feel microsoft/nvidia nerfed these cards. Titan x maxwells rival a 2070 so im honestly not surprised if this is the case.
Any knowledge on this topic would be extremely helpful
|01-27-2020 06:19 PM|
|z390e||Got the screws from EVGA card still wont power on...RIP GTX Titan X (Maxwell) and RIP ACX and Hybrid coolers.|
|01-12-2020 02:32 PM|
|01-12-2020 02:30 PM|
Contacted NVIDIA with receipt everything their response was...."I wont be able to assure if we can send screws but we can check and keep you updated via email"
|01-10-2020 09:16 PM|
Trying to rebuild the GTX Titan X (Maxwell) thats been a paperweight since I got 1080's in SLI....I somehow have lost the 4 spring screws (labeled on waterblock as removable with #1 Philips Bit) and so am now further blocked on installing the DIY waterblock. Anyone have thoughts on what specifically should I be ordering? They are the ones in Step #3 of this manual. Not even sure where to order from. Only place I can see selling them is China?
|01-01-2020 02:00 PM|
|SteezyTN||Anyone upgrade from TX Maxwell to the newer 2080 Ti? I recently bought an Asus PG279Q 1440p 165hz monitor. Most games i can only get around 100-120fps, and was looking to upgrade so i can take full potential of the 165hz.|
|12-08-2019 02:07 AM|
Just flash my all driver bios and you will be fine.....
You might have reached the overclock limit of your card without a voltmod. My card did not want to go higher that 1481.
What does GPUz say about power usage just below the driver reset point?
But now i atleast get 1,3x ghz stable without any fuzz. I also noted that the bios had some OC on the mem aswell.
Now my PC runs fast, and quiet.
Should i run afterburner and set power to 141%? Im running without afterburner atm but im not sure i get 141% power and maybe limiting the card?
Im thinking of pushing the ram even further but my heatsinks get _VERY_ hot as it is...
Thank you for the bios and the support <3
|This thread has more than 10 replies. Click here to review the whole thread.|