Topic Review (Newest First) |
11-15-2019 02:47 PM | |
BlackRain_85 |
Thanks for all these Tips! First of all, im new here as you can see :-) Nice to meet you all! I tried a lot on the timings of the Fury X. And this is what i have with 1.325V on the HBM using the last Official Bios with HBM Voltmodding via HexEditor. The Graphics Card is on 1100/500 Thats it. See ya |
10-30-2019 09:34 PM | |
boot318 | Anyone know where to get the Fury X Fox Bios FX6 with no -.0375 on the VCore at? Rather have +.0250 on VCore that bios. |
07-26-2019 12:01 AM | |
generaleramon | yeah i know, but even if the card is reporting 0%, the fan still run @ 1600rpm |
07-24-2019 04:46 PM | |
Heuchler |
nope, GPU-Z is showing 0% Fan but the speed remain at 1600RPMs, i also tried to use the LUT fan mode instead of Fuzzy Logic. No changes, i guess is something locked at the drivers lelvel, these Fiji are really locked down
you can set it to startup when Windows loads with a custom fan profile |
07-24-2019 10:36 AM | |
generaleramon | nope, GPU-Z is showing 0% Fan but the speed remain at 1600RPMs, i also tried to use the LUT fan mode instead of Fuzzy Logic. No changes, i guess is something locked at the drivers lelvel, these Fiji are really locked down |
07-24-2019 06:05 AM | |
Wuest3nFuchs |
hopefully it worx, hold thumbs! Gesendet von meinem SM-G950F mit Tapatalk |
07-24-2019 05:52 AM | |
generaleramon |
Did you tried this tool here ?
RadeonFanController https://forums.guru3d.com/threads/ra...d-gpus.414383/ Gesendet von meinem SM-G950F mit Tapatalk |
07-24-2019 05:19 AM | |
Wuest3nFuchs |
someone knows if it's possible to lower the idle fan speed on a R9 Nano? i can't go any lower than 1600rpm, my card runs [email protected] Any suggestions?
RadeonFanController https://forums.guru3d.com/threads/ra...d-gpus.414383/ Gesendet von meinem SM-G950F mit Tapatalk |
07-24-2019 05:03 AM | |
generaleramon | someone knows if it's possible to lower the idle fan speed on a R9 Nano? i can't go any lower than 1600rpm, my card runs [email protected] Any suggestions? |
06-16-2019 02:04 AM | |
Heuchler |
very interesting work generaleramon. will have to look into it this stuff. A few more FPS would always be appreciated Division 2 medium-high @1440 p Sapphire Fury Nitro OC @1120 core (HBM 500- stock) |
This thread has more than 10 replies. Click here to review the whole thread. |
Posting Rules | |