|Topic Review (Newest First)|
|06-07-2019 03:02 PM|
I am getting Adapter not found Error: 0FL01
|05-14-2019 12:55 PM|
Hello I've a problem, I tried to OC my 980ti with asus gpu tweak 2 and it brokes my GPU, it isnt detected anymore (even if the fans are still working as 100% speed) so I cant use nvflash or anything.
Is there any fix ?
Thanks you guys !
|05-06-2019 03:36 PM|
I have palit (dual fan) gtx 1060 6gb and i flashed it with a bios for Palit (jetstream) gtx 1060 6b, and the display started acting up, flickering and stuff and then i restarted the PC and now the card doesn't post (i write this using iGPU). I reflashed back to correct bios that i found on techpowerup.com but still not problem solved.
Edit: ok, the problem was old bios from 2016 (not compatible with new nvidia drivers and windows 10), i reflashed a new bios from 2018 (unverified from techpowerup) and now gpu works again.
|08-03-2018 05:37 AM|
Please help me which pin is which (which pins must be connected)
My gpu is biostar rx560 4gb
here is the pics:
|06-17-2018 11:15 AM|
|fearmania||Which pins to combine for the GTX series. would it be enough to push the computer boot up with tweezers?|
|03-05-2018 12:53 PM|
<div class="quote-container" data-huddler-embed="/t/593427/how-to-unbrick-your-bricked-graphics-card-fix-a-failed-bios-flash/240#post_26173301" data-huddler-embed-placeholder="false"><span>Quote:</span>
<div class="quote-block">Originally Posted by <strong>Screemi</strong> <a href="/t/593427/how-to-unbrick-your-bricked-graphics-card-fix-a-failed-bios-flash/240#post_26173301"><img alt="View Post" class="inlineimg" src="/img/forum/go_quote.gif"></a><br><br>
i already posted in the polaris bios mod thread but found this one while googling. maybe it's the better place to discuss my problem<br><br>
no i found the following quote in the comments of the 8-1 pin method:<br>
that seems to be the case for my card. does anybody have an idea how to fix it apart of the pin shortening?<br><br>
if not i have to go the pin route. does anybody have an idea where the bioschip of the strix 480 is located? after some googling i found a picture of the back of the pcb but the resolution is not that high. i marked the ic i suspect to be the bios.<br><br><a class="H-lightbox-open" href="https://www.overclock.net/content/type/61/id/3062255/"><img alt="" class="lightbox-enabled" data-id="3062255" data-type="61" src="https://www.overclock.net/content/type/61/id/3062255/width/350/height/700/flags/LL" style="; width: 350px; height: 197px"></a><br><br>
I tried atiflash 4.17 from 2013 but i get a "adapter not found". any other dos versions i can try?<br><br><br>
€dit: i used every force string available with atiflash and what can i tell you: The freaking Card is up and running again!!!! should have tried that earlier. already got my solder iron ready <img alt="biggrin.gif" class="bbcode_smiley" src="http://files.overclock.net/images/smilies/biggrin.gif"><br><br><a class="H-lightbox-open" href="https://www.overclock.net/content/type/61/id/3062329/"><img alt="" class="lightbox-enabled" data-id="3062329" data-type="61" src="https://www.overclock.net/content/type/61/id/3062329/width/350/height/700/flags/LL" style="; width: 350px; height: 177px"></a></div>
Was that the correct chip? Which is pin 1 and pin 8?
I'm really desperate.
How did you do it to revive the card?
Should we execute the FORCE (-f) commands all together? or first one and then another?
Please HELP MEEE!!!!
|02-22-2018 09:10 PM|
So what's the procedure? connect pin 1-8 & boot & it's okay to disconnect before windows loads? How long to leave jumpered?
I tried 1+8 pin method, window doesnt boot up.. after remove bricked gpu pcie, window can boot. Anyone know whats the problem.
I am sure i am connected the right 1+8 pin.
|02-22-2018 09:07 PM|
I tried 1+8 pin method, still, my screen didnt show up, not even mobo bios show up. After i unplug the gpu pcie, the windows boot up.
Anyone experience this?
|02-06-2018 11:38 PM|
|rickyman0319||is there anyway to fix it if i forget to save my orginial bios for my video card?|
|01-23-2018 09:40 PM|
|This thread has more than 10 replies. Click here to review the whole thread.|