|Topic Review (Newest First)|
|02-16-2017 11:48 PM|
I have a Kraken G10 with some Antec AIO 120mm rad with push out. I don't use side a side panel and I'm waiting for the end of the FFW to switch out the Antec because it is old and failing. I still remember when I used to fold with 3 i7 2600k's using the older Corsair H50's with push-pull.
|02-16-2017 11:00 PM|
|Ryahn||My 980ti is modded. Put an H50 on it, so its pretty much a 980ti hybrid.|
|02-16-2017 10:57 PM|
I think Darth has my EVGA GTX 970 SSC short card. You could ask him about it.
That is stock with a 60% fan speed but I don't have side panel.
1491 was the highest that I could get to on my EVGA GTX 980 Ti when I could keep it cool. I think I have more pictures on thumb drives.
|02-16-2017 08:46 PM|
EVGA GeForce GTX 970 4GB SC
MSI GeForce GTX 980TI GAMING 6GB Gold Edition
|02-16-2017 06:58 PM|
|hertz9753||Which 980 Ti and 970 do you have?|
|02-15-2017 03:00 PM|
|Ryahn||Thanks for the help. I think its stable for now until I get one of those WUs.|
|02-15-2017 02:55 PM|
The driver crashed. You'll have to restart the PC.
After upping the clocks a fail may not happen right away. It may not happen tomorrow. Depending on how stressful the individual WUs are it could crash later. Core21 WUs typically have a higher GPU utilization so its best to make sure its stable with one of those.
|02-15-2017 02:27 PM|
Came so close. Was at 1.2mil PPD and lost it. It was stable up to about +130 on the 980ti. For safety, I dropped it to +100 until it can stabilize again.
DIdnt have an OC applied to the 970 and it looks like it crashed
|02-15-2017 02:02 PM|
|mmonnin||Most of the PPD increase will come from the core clock. You can try memory after finding max stable core clock. Thats what I do.|
|02-15-2017 02:00 PM|
|Ryahn||What bout the memory clocks?|
|This thread has more than 10 replies. Click here to review the whole thread.|