|Topic Review (Newest First)|
|12-03-2019 10:49 AM|
What's to know beside it being yet another 750.us asus board
|12-03-2019 08:39 AM|
intel has changed microcodes for x299....
new bios would have worse performance.
|12-03-2019 07:01 AM|
I don't know the specifics about the VRM on that board, however, I was able to OC a 9920X to 4.8 GHz, and with Prime95 (non AVX) for over 1 hour, the VRM's never got over 55c, and that little fan never came on.
This board might be the best ATX offering from Asus for overclocking, specifically because of the massive VRM count, as well as the massive, actively cooled VRM heat sink.
|12-02-2019 07:01 AM|
|FlanK3r||guys, any info about VRM on PRIME X299-Edtion 30? Thank you.|
|11-19-2019 04:31 AM|
asus explains the real function of the blackplate covering the bottom right side is to protect the chipset soldering. heavy mobo is suggested to be held on both sides. just holding the right side of the pcb is likely to crack the soldering under the chipset.
the official site above also details more about the teamed design. worth to check it out
|10-23-2019 12:02 PM|
DrMOS is a specification by Intel for integrated driver + MOSFET in a single package: https://www.intel.com/assets/pdf/refmanual/drmos.pdf . Infineon also refers to their power stages as DrMOS parts: https://www.infineon.com/cms/en/prod...tage/tda21220/
|10-23-2019 11:42 AM|
Seems Asrock put out info on their new boards:
X299 Taichi CLX https://www.asrock.com/mb/Intel/X299...0CLX/index.asp
"13 phases" " latest SPS (Smart Power Stage) technology" = 6+1 doubled to 12+1 IR ?
12K Hour Nichicon cap
8+8 power CPU connector
X299 Steel Legend https://www.asrock.com/mb/Intel/X299...gend/index.asp
"11phases" "up to 50A" --- probably 5+1 doubled to 10+1 Vishay SiC series based off their other boards
12K hour Nichicon caps
8+8 power CPU connector
Also found out the X299 Creator from MSI is "direct"
And to reiterate why they have triple CPU connectors, it's for cheap PSUs (why you would use one with a HEDT paltform I don't know) per their slides.
|10-10-2019 10:33 PM|
AFAIK its Drmos. They have a new 90A part. We looked into it.... In general we still consider Infineon a higher tier than Drmos (as a brand/quality/etc), but its not far apart. Interested to see how they perform.
|10-10-2019 01:42 PM|
|vmanuelgm||3 8-pin EPS=1200-1300W safely, more or less with a pair of good power supplies (or one with 3 EPS if it exists) and quality cables...|
|10-08-2019 04:38 PM|
|This thread has more than 10 replies. Click here to review the whole thread.|