|Topic Review (Newest First)|
|05-28-2020 01:30 AM|
|Imprezzion||MPG Pro Carbon has a pretty decent VRM lay-out performance wise but the cooling is pretty lackluster. The Gaming X has maybe the better VRM but the BIOS and board features are worse. I'd take the Pro Carbon and put a fan above the VRM and call it a day.|
|05-26-2020 08:26 PM|
Hello guys, someone know if one of this boards can handle with a 9900k+OC? They are the cheapest on sale here.
Aorus Z390 I Pro Wifi,
MSI MPG Z390 Pro Carbon,
Gigabyte Z390M Gaming,
Gigabyte Z390 Gaming X
|03-30-2020 07:23 AM|
|Maestro1337||Are the VRMs in the extreme4 z370 good?|
|03-01-2020 08:36 AM|
The VRM of my MSI Z370 Pro Gaming Carbon was getting 108C after some minutes of testing with Prime 95 SmallFFT (default settings with AVX)... I decided to stop the test.. and find out how that could happen.
I've put a 140mm fan (don't have another fan at the moment) in front of the VRM's and it is steady at 74C when performing the same test.
With SmallFFT 1344K it is even lower, like 63C maybe.
This is with 8700K / 1.30v
With the fan, the VRM temps are not a issue anymore.
The CPU is around the same temps. With heavy stress testing a bit lower then the VRM. (like 3C)
|02-29-2020 12:56 PM|
|Lao Tzu||Hi, recently buy a 9900KF and have an Asus Board Z370 MAXIMUS X CODE, and VRM are quite good, can OC to 5.1GHZ with 1.260v (idle 37°C, 85°C Full Stress, 40-60 in games) Cooler CPU AIO 240mm, without problem, need 1.325v to reach 5.2GHz but i need a better cooling solution to down temps, VRM Temps 52°C, but better VRM than Z390 if looking some board to buy...|
|02-29-2020 11:56 AM|
|ronaldoz||I also gonna read the thread more, but could anyone suggest a cooling solution for the VRM's? I'm getting 96C when using Prime 95 v29.8 Small FFT (default settings) without AVX. With AVX, the CPU will run at 37x after a while. At the moment I got a 280mm radiator in the front, only having 2 x 140 fans pushing. So I will get 2 x 140 to also pull. Will that help much or should I have active cooling at the VRM?|
|11-30-2019 03:45 PM|
|11-30-2019 09:59 AM|
The images of the measurements are on ekwb site.
|11-29-2019 07:38 PM|
|11-29-2019 07:56 AM|
I think the VRM controller reports the last voltage it saw before it was asked to turn off to save power (0V SVID command), while the Vcore reading is from an external sensor (SIO chip) that will read all changes independent of the VRM controller state.
I was running with speedshift mode enabled in BIOS and windows set to autonomouse mode. If I just disable autonomous mode in Windows, VR OUT lowers at idle as I thought it should. It is a difference between > 1,25v avg. with autonomous enabled, and .725 autonomous disabled. So I don't know if the OS can tell the chip to no longer use speedshift when I disable autonomouse mode.
|This thread has more than 10 replies. Click here to review the whole thread.|