|Topic Review (Newest First)|
|07-12-2019 09:54 PM|
Sorry for the long delay all! I'm back for another few updates.
I was struggling with what to do when it came to how to integrate a pump. Found the Alphacool Eisbaer LT Solo, which is a block with an integrated pump like an AIO - problem is, it's SUPER ugly.
Decided to give that a try.
It fits, JUST BARELY within spec.
Is definitely not the ideal look for having a window. Will need to look for another possible solution.
That other solution came within a couple of months! The ASRock A300 Series PC!
Ordered one the second I could, to scavenge the STX motherboard from the case.
The cats loved me ordering from Newegg.
The new system is so small, it makes me almost want to scrap the xbox idea, and try to watercool it instead.
Got the full mobo/psu out of the build.
New setup ready for transplant, after testing of course!
With a successful test boot, it was time to see how it fit into the chassis. It's far smaller than the ITX counterpart, and will need to either drill new holes in this tray, use the tray it came with, or a third alternative. I'm still debating on what to do here.
With the decreased size, that then gives me some options for the rest of the real estate within the chassis. Can I fit a pump, and thus a better aesthetically pleasing block?
|01-14-2019 01:19 AM|
I subbed this thread from the beginning and i love this project! Take all the time you need, good works needs time and patience.
I love these "craftworks" and i'm a little "envious" because i don't have the necessary abilities to build anything more complex than a standard pc... :-)
I stay tuned for updates!
|01-07-2019 10:27 AM|
|pez||Indeed. I don't mind the wait at all since all of these updates have been quality . Looking forward to more as they come!|
|01-01-2019 11:53 PM|
|NGX||looking good! nice choice for the block|
|12-31-2018 07:25 PM|
Decided to install windows and get it to where I can just boot and go.
Got the fan grills in place.
Another CPU block to try came in.
Sorry that the updates are slow, trying to budget myself so I don't overspend all at once.
|11-23-2018 04:24 PM|
So I finally got moved into my new place, and dug the project back out.
The frame received some damage, so I'll be repairing that shortly, but here it is on my new table top.
Got the fan grills painted.
Ordered the new waterblock:
Bonus picture of my (still currently setting up) office space.
|09-19-2018 01:11 PM|
Got sick for nearly a month. Am almost better now, but finances have taken a deep hit.
This project is not dead, but it is on the back burner until somehow I get finances back to the point where I can finish it.
Thank you for your interest in this project, and I hope to be back at it before long.
|08-22-2018 09:02 AM|
If they had an appropriate Ryzen ITX board with a port to plug the razer dock or similar into it? Sure, I'd go along with that.
They're not hotpluggable like the TB3 ones, but there should also be less overhead.
|08-22-2018 07:19 AM|
|08-22-2018 03:24 AM|
|spinFX||Would external gpu be an option? This things gotta beat an actual xbox!|
|This thread has more than 10 replies. Click here to review the whole thread.|