Overclock.net - An Overclocking Community - Reply to Topic
Thread: * The "Official" Gigabyte GA-X58A-UD3R/UD5/UD7/UD9 Owner's Club * Reply to Thread
Title:
Message:

Register Now

In order to be able to post messages on the Overclock.net - An Overclocking Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in


  Additional Options
Miscellaneous Options

  Topic Review (Newest First)
03-14-2020 04:42 AM
m4shroom Hi guys after I bought x5675 decided to upgrade my rams too.my board ex58-ud5 rev1(this board has only one rev !!!) currently using 3x2gb corsair xms 3 1600 mhz ram.

I have found local deal 2x8 gb patroit viper ram dualkit

Does it fit to my board ? Is ıt good ? to use in triple channel maybe I add another one later .Or could you recommend me ram from aliexpress ?_? thx for your helps already..
03-13-2020 06:31 AM
ezveedub
Quote: Originally Posted by ComansoRowlett View Post
I managed to find a way to force flash the bios, F7 works just fine with the X5680 now. Although it still complains if you change too much stuff at once, if you change stuff like one or two things at a time it'll allow it. Can see why it's not on the official support list now.


Did you try F8 bios? They changed the bios file size from F7 to F8 and higher, so trying to roll back past F8 will give an error on bios file size, so you have to manually flash it. Since these mobos are way past EOL, you won’t see any official support list updates.


Sent from my iPhone using Tapatalk Pro
03-13-2020 06:27 AM
ezveedub
Quote: Originally Posted by resxwni01 View Post
I would like a bios mod for gigabyte x58a ud3r rev 1.0 trying to get nvme ssd pci-e can not get bios to see samsung 950 pro


Have to check over on Tweaktown modded bios section.


Sent from my iPhone using Tapatalk Pro
03-13-2020 06:12 AM
ComansoRowlett
Quote: Originally Posted by BOBKOC View Post
If your memory frequency= BCLK*10(X56** not work over 10)&Uncore=20 try System Memory Multiplier(SPD)=18 or Uncore≠20 at other times.
I managed to find a way to force flash the bios, F7 works just fine with the X5680 now. Although it still complains if you change too much stuff at once, if you change stuff like one or two things at a time it'll allow it. Can see why it's not on the official support list now.
03-08-2020 03:32 PM
BOBKOC
Quote: Originally Posted by ComansoRowlett View Post
I try to change any settings the system just kicks in the "OC fail" protection.
If your memory frequency= BCLK*10(X56** not work over 10)&Uncore=20 try System Memory Multiplier(SPD)=18 or Uncore≠20 at other times.
03-02-2020 10:25 PM
ComansoRowlett Hey, been trying to look around with no luck. But I have an X58A-UD7 Rev 1.0 and an X5680 on the latest bios (was bought this way so F9A), it boots and all but whenever I try to change any settings the system just kicks in the "OC fail" protection. Trying to flash to an older bios but the board says the file size is incompatible, tried in windows on windows 7 (64 bit) and the software says it is also incompatible even though I got the flashing tool from the windows 7 64bit section. Was wondering if anyone can point me in the direction of which bios would be best, and how to flash it.

Thanks.
01-21-2020 12:34 PM
resxwni01 I would like a bios mod for gigabyte x58a ud3r rev 1.0 trying to get nvme ssd pci-e can not get bios to see samsung 950 pro
01-14-2020 10:07 AM
doyll
Quote: Originally Posted by Noob256 View Post
Ok, since there was no qualified Intel to be found on the estimated consumption of this platform during OC i ordered a device to measure myself, so here the results (whole System power consumption):

System Powered Off : 2, 7 Watts

Windows 7 Desktop (6 x 4,33 GHZ) : 148 Watts

Resident Evil II Remake Racoon City Zombie Infestation (GTX 1070 pretty much maxed out) : 240 Watts

Cinebench R15 Multicore (exactly 1000 points Kappa) : 275 Watts

Conclusion: All not that worrysome. Although those 12 year old VRMs are pulling a fine load...

System (sorry no proper export sheet):
Gigabyte X58a-UD5 (Rev1)
Xeon X5670 (@ 197 BCLK x 22, 1,328 VCore)
6x2 GB Corsair XMS 1600 (@ 15xx CL7 CR1)
Alpenföhn Atlas
Zotac GTX 1070 Mini
Samsung 860 EVO 1 TB
WD Velociraptor 300 GB
Corsair AX - 750 Watts PSU
Audiotrak Prodigy HD 2
Cooltek G 3 Case (allows for fan directly behind CPU VRMs)

Bios set voltages:
Loadline-Calibration : Level 1
CPU VCore : 1.36875 V (the actual value appears much lower)
QPI/VTT Voltage : 1,315 V
IOH Core : 1,1 V
ICH I/O : 1,5 V

Godspeed everyone!
I assume that wattage is for entire computer? As in monitoring power consumed by computer's PSU?
01-14-2020 09:49 AM
Noob256 Ok, since there was no qualified Intel to be found on the estimated consumption of this platform during OC i ordered a device to measure myself, so here the results (whole System power consumption):

System Powered Off : 2, 7 Watts

Windows 7 Desktop (6 x 4,33 GHZ) : 148 Watts

Resident Evil II Remake Racoon City Zombie Infestation (GTX 1070 pretty much maxed out) : 240 Watts

Cinebench R15 Multicore (exactly 1000 points Kappa) : 275 Watts

Conclusion: All not that worrysome. Although those 12 year old VRMs are pulling a fine load...

System (sorry no proper export sheet):
Gigabyte X58a-UD5 (Rev1)
Xeon X5670 (@ 197 BCLK x 22, 1,328 VCore)
6x2 GB Corsair XMS 1600 (@ 15xx CL7 CR1)
Alpenföhn Atlas
Zotac GTX 1070 Mini
Samsung 860 EVO 1 TB
WD Velociraptor 300 GB
Corsair AX - 750 Watts PSU
Audiotrak Prodigy HD 2
Cooltek G 3 Case (allows for fan directly behind CPU VRMs)

Bios set voltages:
Loadline-Calibration : Level 1
CPU VCore : 1.36875 V (the actual value appears much lower)
QPI/VTT Voltage : 1,315 V
IOH Core : 1,1 V
ICH I/O : 1,5 V

Godspeed everyone!
01-10-2020 07:39 AM
Noob256 Hi everyone,

i was surprised to yet see an active and nice community around this board series. Pretty cool!

I finally assembled some more or less leftover parts to my X58 UD-5 (Rev 1) which had been serving me faithfully until i finally upgraded to a Skylake 6700k.

Now the Westmere X5670 i Ebay´ed a while ago looks alright. But what worries me is the power draw that HWInfo shows during Cinebench. 560 Watts seems a bit much... ?! Is that a somewhat legit figure or does HWInfo mess up there? I am a little worried.

Thanks in advance for any qualified feedback.

My system/settings:
Gigabyte X58A-UD5 Rev 1, Bios F7
Xeon X5670 (air cooled by EKL Alpenföhn Atlas)
Corsair AX750 PSU
6x2 GB Corsair XMS CL7 (CR 1)
Zotac GTX 1070 Mini
197x22 @ 1,368 VCore Bios set (apparently turns out as 1,328 V both in CPUZ and HWInfo)
LLC Lvl 1
VTT 1,315
ICH Values: Manually keyed in default values just to be safe
Rest of the Voltages set to AUTO (should i customize them? forgot most of the X58 OC stuff and i miss clunk.co.uk which had a very nice topic on OCing this board back in the day)


See Powers -> CPU MAX (my Coffe Lake CPU doesnt have this tab anymore somehow) in HWInfo ...
This thread has more than 10 replies. Click here to review the whole thread.

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off