Topic Review (Newest First) |
06-29-2019 04:55 PM | |
DarthFK |
Thanks
@deepor
! Was on the phone, as I am moving into another apartment. Will re-write right away from a laptop: I try to change offset voltage on bios and it wont change,it will not update, i can only change it via Asrock Extreme Tunner in windows
![]() @pel , what's the exact model of the board, BIOS revision and CPU? P.S. i might reply only sporadically due to the move-in. |
06-29-2019 04:51 PM | |
deepor |
@DarthFK
: You might want to know that there's a terrible bug right now on overclock.net when people are posting with a smartphone browser. For people browsing with a desktop PC, in your post the "s" and "S" letters disappear and are replaced by strange codes "& # 1 1 5 ;" and "& # 8 3 ;", making things very hard to read. This only shows up for people using desktop browsers, you can't see it on the smartphone. You can check out the problem on your smartphone as well if you choose "show desktop site" in your browser's menu. You'll then see the same broken text that's showing up on a desktop browser. |
06-29-2019 01:37 PM | |
DarthFK |
I try to change offset voltage on bios and it wont change,it will not update, i can only change it via Asrock Extreme Tunner in windows
Anyway, before that: pel, what's the exact model of the board, BIOS revision and CPU? P.S. i might reply only sporadically due the the move-in. |
06-29-2019 12:49 PM | |
pel | I try to change offset voltage on bios and it wont change,it will not update, i can only change it via Asrock Extreme Tunner in windows |
04-03-2019 02:47 PM | |
PauliePeanuts | When i look in system info, it says my bios is legacy mode.. Is that something I should change? I got it to work by resetting the bios with the jumper , Im not sure what happened. I was always able to get into the bios using the F2 key.. I might have shut off legacy USB in bios, maybe that is what disabled it? Not sure. It seems to be working now after the CMOS clear with the jumper.. I see USB legacy is now enabled by default.. I think someone recommended i turned that off to help trouble shoot some issues with my VR headset. |
04-01-2019 04:31 PM | |
aflack |
@DarthFK
or anyone else here paying attention to this thread... I no longer can get into my bios, and I am not sure why.. i click f2/del, but it just bypasses and goes right into windows... I read there is an option under settings to restart into UFEFI , but my windows doesn't have that option displayed.. no idea what to do..
Try shutdown /r /f /t 0 /fw at the command prompt, or if you are using an asrock mobo download restart2uefi from their website |
04-01-2019 11:18 AM | |
deepor |
@DarthFK
or anyone else here paying attention to this thread... I no longer can get into my bios, and I am not sure why.. i click f2/del, but it just bypasses and goes right into windows... I read there is an option under settings to restart into UFEFI , but my windows doesn't have that option displayed.. no idea what to do..
If you do use UEFI, this kind of thing is caused by enabling a "fast boot" option somewhere in the UEFI/BIOS menus. At boot it will then not look for the keyboard and will instead go into Windows immediately. There should be a way to make the UEFI/BIOS boot with its default, slower mode where it will look for the keyboard. I don't know how to trigger this, but what I would try is disconnecting power for the whole PC for something like ten seconds. If you do not use UEFI, then maybe your problem is that the UEFI/BIOS can't detect your keyboard at boot. Did you change something about that recently? Like, are you using a different keyboard? Or did you connect it to a different USB port? I've seen motherboards where only PS/2 keyboard were guaranteed to work, and USB keyboard were often problematic, especially gaming stuff with "n-key roll-over" over USB. This keyboard problem idea could of course also hit you when using UEFI boot, so the keyboard not being detected is always something to think about. |
03-31-2019 09:01 PM | |
PauliePeanuts | @DarthFK or anyone else here paying attention to this thread... I no longer can get into my bios, and I am not sure why.. i click f2/del, but it just bypasses and goes right into windows... I read there is an option under settings to restart into UFEFI , but my windows doesn't have that option displayed.. no idea what to do.. |
03-11-2019 06:36 PM | |
PauliePeanuts |
Thanks man. Good luck in all your future endeavors. It's always a good thing when you're looking to advance instead of looking for where to begin lol. cheers |
03-09-2019 02:52 PM | |
DarthFK |
@DarthFK
Hey bud, I guess we were the last two to keep this thread alive lol. So far I haven't had any issues with this overclock. I bought a new video card and overclocked it using the MSI afterburner and i did get some blue screen crashes from it. But I think it has stabilized.. I think the computer is running pretty good. I got a 96 score overall on userbenchmark. (processor 92 / GPU 109).. Im thinking of purchasing a VR headset like the Odyssey plus... I think this computer can handle it. What do you think? Thanks again for your help just wanted to update you since you spent a lot of time helping me.
Hope this message finds you well I am not the best person to advise you on the VR. I have no clue about it. But apparently the minimum requirements on both Oculus & Odyssey+ are an i5-4560. In case of Odyssey any VGA for Standard WMR & a 1060 or 480/580 for Ultimate. Since you have an i5-3570k very nicely overclocked, you actually either meet or exceed the mere next gen i5-4560 requirement, I think. But this is my uninformed opinion. https://m.windowscentral.com/samsung...vs-oculus-rift As to myself, I am getting pretty busy these days in search of the next step in my professional life, which hopefully will come sooner rather than later[IMG class=inlineimg]/forum/images/smilies/smile.gif[/IMG] Occasionally though, I get a break for a line on this forum & a game [IMG class=inlineimg]/forum/images/smilies/smile.gif[/IMG])) Hope you are ok? Wishing you best! |
This thread has more than 10 replies. Click here to review the whole thread. |
Posting Rules | |